Abstract:Micro/mesoscale metal sheet hydroforming (SHF) process is an efficient approach suitable for mass production to fabricate metal parts with micro/mesochannel features. In conventional sheet hydroforming process, the channel's feature sizes (e. g., the channel width, fillet radius, etc.) are much greater than the sheet's thickness, so that the influence of the fillet and the inhomogeneous stress/strain distribution through the thickness direction can be ignored. However, the influence becomes increasingly important, because the thickness of the sheet and the feature dimensions of the microchannel are in the same magnitude as the feature sizes of the material and tools reduced to micro/mesoscale. In this paper, an analytical model with consideration of the inhomogeneous stress/strain distribution was developed to predict the channel profile at different pressures in micro/mesohydroforming process. Plane-strain deformation behaviors in the section of the workpiece were studied, and the relation function between the pressure and the channel height was established. Via this function, the channel height could be accurately predicted for a given pressure. Furthermore, an experimental setup was prepared, hydroforming experiments using microchannel dies with various geometric dimensions were conducted, and the channel height of the workpieces was measured. It was found that the experimental results matched well with the simulation results, which confirmed the validity of the analytical model proposed in this study. It is expected that the model will be beneficial in the optimization of the microchannel hydroforming process. [DOI: 10.1115/1.4006180]

Simulating sheet metal double-sided hydroforming by using thick shell element

Mechanism Analysis on Thickness Distribution of Aluminum Alloy Hemispherical Shells in Double-Sided Sheet Hydroforming

Explicit Analysis of Sheet Metal Forming Processes Using Solid-Shell Elements

A Modified Shell Element Model Combined with Yld91 Yield Function in Simulating Aluminum Alloy Applied Hydroforming

The simulation of sheet metal forming processes via integrating solid-shell element with explicit finite element method

Effects of preform on thickness distribution of hydroformed Y-shaped tube

Deformation of Large Curved Shells Using Double-Sided Pressure Sheet Hydroforming Process

Study on hydroforming of AA6061-T6 aluminum alloy sheet based on upper sheet

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Finite element analysis of hydroforming process for sheet metal pairs

Solid Shell Element And Its Application In Roll Forming Simulation

The Theoretical Prediction and Numerical Simulation of Sheet Metal Forming Limit

Application and development of algorithm for sheet hydro-forming in numerical simulation

Analysis and experiment on wrinkling suppression for hydroforming of curved surface shell

Modeling of microchannel hydroforming process with thin metallic sheets

Welded Double Sheet Hydroforming of Complex Hollow Component

Hydroforming behavior of double sheets of different materials

Formability Influenced by Process Loading Path of Double Sheet Hydroforming

The Numerical Simulation and Failure Prediction for Thick Sheet Metal Fine-Blanking Based on Oyane Damage and Fracture Model

An efficient multiphysics solid shell based finite element approach for modeling thin sheet metal forming processes

Analysis of Thickness Variation in 2219 Aluminum Alloy Ellipsoid Shell with Differential Thickness by Hydroforming