Abstract:Understanding the effects of martensite volume fractions (Vm) in dual-phase (DP) steel resulting from heat treatment is crucial for designing structures for mechanical impact resistance and optimizing manufacturing processes. DP steel's material behaviour depends heavily on its microstructure properties. While stress-strain curves for individual phases in DP steels are often determined using empirical models, extensive experimental data is required to establish empirical model constants. This research aims to achieve two main objectives: Firstly, to calibrate stress-strain curves for pure ferrite and pure martensite using limited experimental data using Micromechanical Adaptive Iteration Algorithm (MAIA). This calibration involves using stress-strain data from DP steels with varying Vm during the calibration stage and additional data for verification. Secondly, to conduct a comprehensive sensitivity analysis of MAIA to assess its capabilities and limitations. Microstructure-based finite element (FE) models, simulated with ABAQUS/Standard, are employed to predict stress-strain curves under uniaxial tensile test conditions. The MAIA approach successfully calculated ferrite and martensite stress-strain curves that could predict plastic behaviour of DP steel with different Vm, which agreed with experimental work. Key advantages of this approach include avoiding complex 3D microstructure geometries and requiring only two experimentally obtained stress-strain curves with different Vm for material constant calibration, along with another curve for validation. However, the experimental data selected for calibration must have a Vm difference between 20% to 50% and one of the DP steels must have a low martensite volume fraction. The FE micromechanical model could capture the effect of softening of martensite phase and strengthening of ferrite phase as compared to its bulk properties for DP steel. The effect of Vm on strain hardening rate was also successfully captured. This technique comes with obvious shortcomings, such as excluding crystal plasticity behaviour, and change in chemical composition within the individual phase with varying martensite volume fraction.

Microstructure-Based RVE Approach for Stretch-Bending of Dual-Phase Steels

Uniaxial Tension Simulation Using Real Microstructure-based Representative Volume Elements Model of Dual Phase Steel Plate

Predictive mechanical property and fracture behavior in high-carbon steel containing high-density carbides via artificial RVE modeling

In-Situ Bending under Tension Shear Fracture Analysis and Microstructure "earthquake" of Dp780 Dual Phase Steels

Mesoscale Deformation Incompatibility Analysis of DP1180 Steel

Three-Dimensional Micromechanical Modeling of Martensite Particle Size Effects on the Deformation Behavior of Dual-Phase Steels

Analysis and design of dual-phase steel microstructure for enhanced ductile fracture resistance

Strain-Hardening Behaviors of Dual Phase Steels with Microstructure Features

Strain-Hardening Behavior of Dual-Phase Steel under Multistress States

Constructing Micro-Mechanical Representative Volume Element of Medium Mn Steel from EBSD Data

Shear Fracture of Advanced High Strength Steels

Failure Modes Of Dual Phase Steels Under Different Loading Paths

A Unique Numerical Iterative Approach for Modelling Individual Phase Stress-Strain Curves in Dual Phase Steel

The Study and Application on Ductile Fracture Criterion of Dual Phase Steels During Forming

Investigation of failure mechanisms in dual-phase steels through cohesive zone modeling and crystal plasticity frameworks

Study Of The Mechanical Behavior Of Dual-Phase Steel Based On Crystal Plasticity Modeling Considering Strain Partitioning

Theoretical failure investigation for sheet metals under hybrid stretch-bending loadings

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

Microstructure Failure in Ferrite-Martensite Dual Phase Steel under In-Situ Tensile Test

Failure Mode And Ductility Of Dual Phase Steel With Edge Crack

Study of Microstructure and Spring Back Mechanism of High Strength Dualphase Steel During Bending Plastic Deformation