Abstract:The thermophysical properties and liquid-solid phase transition characteristics of ternary (Co0.5Cu0.5)100-xSnx(x=10, 20, 30, 40 and 50 at%) alloys are systematically investigated. The liquidus temperature and latent heat of fusion, as well as the undercooling are determined by differential scanning calorimetry (DSC) method. Based on the measured data, their relationships with Sn content are fitted by polynomial functions. The liquidus temperature shows a decreasing tendency with the increase of Sn content. The undercooling of liquid (Co0.5Cu0.5)100-xSnx alloys significantly increases with increasing Sn amount, indicating that the addition of Sn element enhances the undercoolability. By using the laser-flash and DSC methods, the thermal diffusion coefficients and specific heats of solid ternary (Co0.5Cu0.5)100-xSnx alloys are respectively measured in a temperature range from 293 to 473 K. The thermal diffusion coefficients increase linearly as temperature rises. The thermal diffusion coefficient varies from 1.0610-5 to 1.1210-5 m2s-1 for ternary Co45Cu45Sn10 alloy, which is close to that of Co element but much lower than those of Cu and Sn elements in the same temperature range. However, the thermal diffusion coefficients of other (Co0.5Cu0.5)100-xSnx alloys are far less than that of ternary Co45Cu45Sn10 alloy. The specific heat shows an increasing trend with temperature, and drops apparently with increasing Sn amount. From the measured thermal diffusion coefficients, specific heats and densities, the thermal conductivities of ternary (Co0.5Cu0.5)100-xSnx alloys at 293 K are derived. With the Sn content increasing up to 40 at%, the thermal conductivities for (Co0.5Cu0.5)100-xSnx alloys monotonically decrease from 33.83 to 7.90 Wm-1K-1, and subsequently increases slightly when the Sn content further increases up to 50 at%. In addition, on the basis of the DSC curves and solidification microstructures, the liquid-solid phase transitions are also explored. When the Sn content is less than 30 at%, the primary (Co) phase appears as coarse dendrites, whose volume fraction decreases as Sn content increases. Once Sn content exceeds 30 at%, the Co3Sn2 phase preferentially nucleates and grows during solidification, which occupies about 89% volume in the solidified Co30Cu30Sn40 alloy. The phase constitution investigation indicates that with the increase of the Sn content, the (Cu) solid solution phase disappears, whereas intermetallic compounds, including Cu41Sn11, Cu3Sn, and Cu6Sn5 phases successively precipitate from the alloy melts. The (Sn) solid solution phase even appears when Sn amount reaches 50 at%.

Liquid–liquid Phase Equilibrium and Core–shell Structure Formation in Immiscible Al–Bi–Sn Alloys

Liquid Immiscibility and Core-Shell Morphology Formation in Ternary Al–Bi–Sn Alloys

Liquid–liquid Phase Equilibrium in Ternary Immiscible Al–Bi–Sn Melts

Liquid Phase Separation and Core–shell Morphology of Al75Bi9Sn16immiscible Alloy

Liquid Phase Separation of Ternary Al–In–Sn/Ge Monotectic Type Alloys Investigated with Calorimetric Method

Thermodynamic properties and microstructure evolution of ternary Al–10%Cu– x %Sn immiscible alloys

Phase Separation and Structure Evolution of Ternary Al–Cu–Sn Immiscible Alloy under Ultrasonic Levitation Condition

Formulation of Al–Bi–Sn Immiscible Alloys Versus the Solidification Behaviors and Structures

Macroscopic Liquid Phase Separation Of Fe-Sn Immiscible Alloy Investigated By Both Experiment And Simulation

A Computational and Experimental Study of Ultrasonicated Phase Separation Process for Liquid Al–Bi Immiscible Alloy

Liquid phase separation and monotectic structure evolution of ternary Al62.6Sn28.5Cu8.9 immiscible alloy within ultrasonic field

Liquid-liquid phase separation of freely falling undercooled ternary Fe-Cu-Sn alloy

Experimental Investigations and Phase-Field Simulations of Triple-Phase-separation Kinetics Within Liquid Ternary Co-Cu-Pb Immiscible Alloys.

The Core-Shell Structure of Al70bi11sn19 Immiscible Alloy Particles

Solidification Structure Evolution of Immiscible Al–Bi–Sn Alloys at Different Cooling Rates

Multiple Ultrasounds Assisted Phase Separation and Monotectic Solidification of Liquid Ternary Al81.5Cu14.7Bi3.8 Immiscible Alloy

Phase Separation and Microstructure Evolution of Ternary Fe–Sn–Ge Immiscible Alloy under Microgravity Condition

Thermophysical Properties and Liquid-Solid Transition Mechanisms of Ternary (Co0.5cu0.5)100-Xsnx Alloys

In Situsynchrotron Study of Liquid Phase Separation Process in Al-10 Wt.% Bi Immiscible Alloys by Radiography and Small Angle X-ray Scattering

Phase separation and formation of core-type microstructure of Al–65.5 mass% Bi immiscible alloys

Effect of Melt Superheating Treatment on Solidification Structures of Al 75 Bi 9 Sn 16 Immiscible Alloy