Abstract:Binder-free electrodes based on 3D porous nickel–cobalt binary hydroxides (NCH)/graphene (G) composites on nickel foam (NF) for supercapacitors are fabricated via a chemical vapor deposition (CVD) process combined with an electrochemical deposition (ED) method. High quality graphene grown on NF makes the surface more suitable for deposition of 3D porous NCH and simultaneously enhances the electrode conductivity. The 3D structure can improve the electron transport ability and increase the contact of the active sites with electrolyte. The morphology and electrochemical performance of NCH/G/NF electrodes can be readily manipulated by adjusting the deposition current density and the Ni–Co ratio of the deposition solution. High capacitance with enhanced stability and rate capability is achieved and is attributed to the synergetic effect of the above factors. Specifically, at the deposition current density of 0.625 mA cm−2 and Ni–Co ratio of 1 : 1, the NCH11/G/NF electrode exhibits a maximum specific capacitance of 1410 F g−1 at 2 A g−1. When the current density increases to 4 A g−1, the capacitance is still 1328 F g−1 with a high capacitance retention of 94.2%. After 2500 cycles, the capacitance retention is 92.1%, which is higher than that of a common slurry-coated electrode. To research its practical applications, an asymmetric supercapacitor was fabricated with a NCH11/G/NF electrode as the positive electrode and activated carbon as the negative electrode. The asymmetric device exhibits a prominent energy density of 33.75 W h kg−1 at a power density of 750 W kg−1. The binder-free electrode with superior performance has been proven to be very promising for energy storage.

Facile Synthesis of Nitrogen-Doped Graphene on Ni Foam for High-Performance Supercapacitors

Synthesis of the Graphene/Nickel Oxide Composite and Its Electrochemical Performance for Supercapacitors

Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Facile and Tunable Synthesis of Nitrogen-Doped Graphene with Different Microstructures for High-Performance Supercapacitors

High-Performance Ni-Co Sulfide Nanosheet-Nanotubes Grown on Ni Foam As a Binder Free Electrode for Supercapacitors

Low temperature reduction of graphene oxide film by ammonia solution and its application for high-performance supercapacitors

Facile Synthesis of Nitrogen-Doped Graphene Quantum Dots/MnCO3/ZnMn2O4 on Ni Foam Composites for High-Performance Supercapacitor Electrodes

Enhanced Electrochemical Performance of Nitrogen-Doped Graphene and Poly[ni(salen)] Composite Electrodes for Supercapacitors

Nitrogen‐Superdoped 3D Graphene Networks for High‐Performance Supercapacitors

Flexible Supercapacitor Electrodes Based on Nitrogen-Doped Carbon Derived from Polyimide/Graphene

Controllable Synthesis of 3D Binary Nickel–cobalt Hydroxide/graphene/nickel Foam As a Binder-Free Electrode for High-Performance Supercapacitors

Nitrogen-Superdoped 3D Graphene Networks for High-Performance Supercapacitors.

Ammonia-induced N-doped NiCoO2 Nanosheet Array on Ni Foam As a Cathode of Supercapacitor with Excellent Rate Performance

NH3 assisted photoreduction and N-doping of graphene oxide for high performance electrode materials in supercapacitors.

Nitrogen-Enriched Reduced Graphene Oxide for High Performance Supercapacitor Electrode.

High Performance Supercapacitors Based on Highly Conductive Nitrogen-Doped Graphene Sheets

Nitrogen-doped Graphene/multiphase Nickel Sulfides Obtained by NiC3N3S3 (metallopolymer) Assisted Synthesis for High-Performance Hybrid Supercapacitors

Growth of cobalt–nickel layered double hydroxide on nitrogen-doped graphene by simple co-precipitation method for supercapacitor electrodes

High-Performance Nickel Cobalt Hydroxide Nanosheets/Graphene/Ni foam Composite Electrode for Supercapacitor Applications

Facile synthesis of nickel network supported three-dimensional graphene gel as a lightweight and binder-free electrode for high rate performance supercapacitor application.

Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors