Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

New Progress in Development of Ferroelectric and Piezoelectric Nanoceramics

Piezoelectric Nanoceramics

Processing, Microstructure and Properties of Nanograin Barium Titanate Ceramics by Spark Plasma Sintering

Phase Transitions in Nanocrystalline Barium Titanate Ceramics Prepared by Spark Plasma Sintering

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Ferroelectric properties study for nanocgrain barium titanate ceramics

Grain Boundary Region and Local Piezoelectric Response of BiScO3–PbTiO3 Nanoceramics Prepared by Combination of SPS and Two-Step Sintering

Investigation of Ferroelectric Properties on Nanocrystalline Barium Titanate Ceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Grain size effect on piezoelectric performance in perovskite-based piezoceramics

Ferroelectric Properties of Nanocrystalline Barium Titanate Ceramics

Making Nanostructured Ceramics from Micrometer-Sized Powders via Grain Refinement During SPS Sintering

Size Effect Investigation on Nano-Scale Ferroelectric Ceramic Materials

Preparation and Properties of Fine‐Grain (1−x)bisco3−xpbtio3 Ceramics by Two‐Step Sintering

Effects of density inhomogeneity in green body on the structure and properties of ferroelectric ceramics

Electric Field-Induced Giant Strain and Piezoelectricity Enhancement Effect in (bi1/2na1/2)0.935+xba0.065ti1−x(pr1/2nb1/2)xo3 Lead-Free Ceramics

Grain size effects and structure origin in high-performance BaTiO3-based piezoceramics with large grains

Bulk Dense Fine-Grain (1−x)bisco3–xpbtio3 Ceramics with High Piezoelectric Coefficient

The Phase Transitions and Ferroelectric Behavior of Dense Nanocrystalline BaTiO 3 Ceramics Fabricated by Pressure Assisted Sintering

Structure and Ferroelectric Properties of Dense Nanocrystalline BaTiO3 Ceramics Prepared by High Pressure Sintering Method