Abstract:In this paper, the synthesis of poly(3,4-ethylenedioxythiophene) (PEDOT) by cyclic voltammetry (CV) electrochemical deposition and its application in the counter electrode of solid-state dye-sensitized solar cells were studied. The influence of cycle times (10 similar to 50 times) on the morphology, thickness and optical properties of PEDOT films were explored by Fourier transform infrared spectroscopy (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM) and ultraviolet-visible spectroscopy (UV-Vis). The photoelectrochemical properties of solid-state dye-sensitized solar cells based on PEDOT transparent counter electrode were characterized by J-V, electrochemical impedance spectroscopy (EIS), intensity modulated photocurrent spectrum/photovoltage spectrum (IMPSNS) and Tafel analysis. The results showed that an un-uniform film with the thickness of 0.5 mu m and light transmittance of 80% was formed when CV cycle times was 10, where the PEDOT film was not completely covered on the substrate. When the CV cycles reached 30 similar to 40, a uniform and dense transparent film was obtained and the highest photo-electric conversion efficiency of the corresponding solid-state dye-sensitized solar cells reached 5.34%. This is because uniform and dense surface, good optical properties and high photo- electric catalysis properties (J(0) =2.51 X 10(-3) A.cm(-2)) for I-3 in the electrolyte, made the device obtain larger diffusion coefficient (D-n=28.80 mu m(2).ms(-1)) and carrier diffusion length (L = 21 .41 mu m), which were favorable for charge transfer. When the number of CV cycles was further increased to 50 times, showing greater roughness, the PEDOT fihn was no longer growing uniformly. The PEDOT film deposited on the FTO surface underwent some dissolution and desorption, the PEDOT film became uneven, and the catalytic activity of PEDOT electrode to I-3(-) in electrolyte was reduced. The device with PEDOT transparent counter electrode fihn deposited by cyclic voltammetry could also achieve double-side illumination with good catalytic activity to the electrolyte. Under the condition of double-side illumination, the photoelectric performance of the device using electrodeposited PEDOT as transparent counter electrode was improved by about 20%. The improvement of the photoelectric performance of the device is mainly due to the increase in the absorption of photons by the double-sided illumination.

Review on Application of PEDOTs and PEDOT:PSS in Energy Conversion and Storage Devices

Recent Progress in the Biomedical Application of PEDOT:PSS Hydrogels

Recent Advances of Synthesis, Properties, Film Fabrication Methods, Modifications of Poly(3,4‐ethylenedioxythiophene), and Applications in Solution‐Processed Photovoltaics

Research Progress on Polymer Solar Cells Based on PEDOT:PSS Electrodes

Progress in Synthesis of Conductive Polymer Poly(3,4-Ethylenedioxythiophene)

Semiconductive Polymer-Doped PEDOT with High Work Function, Conductivity, Reversible Dispersion, and Application in Organic Solar Cells

Enhanced Electrochemical Performance of Pedot Film Incorporating Pedot: Pss

Rising advancements in the application of PEDOT:PSS as a prosperous transparent and flexible electrode material for solution-processed organic electronics

Advanced Electrochromic Energy Storage Devices Based on Conductive Polymers

Review on PEDOT:PSS-Based Conductive Fabric

Recent Progress in Conjugated Conducting and Semiconducting Polymers for Energy Devices

Nanoengineering of poly(3,4-ethylenedioxythiophene) for boosting electrochemical applications

PEDOT and PEDOT:PSS thin-film electrodes: patterning, modification and application in stretchable organic optoelectronic devices

Electrochemical Synthesis of PEDOT and Its Application in Solid-State Dye-sensitized Solar Cells

Recent progress in device designs and dual‐functional photoactive materials for direct solar to electrochemical energy storage

Poly(3,4-ethylenedioxythiophene) (PEDOT) as promising thermoelectric materials and devices

Enhancing Efficiency of Organic Solar Cells with Alkyl Diamines Doped PEDOT: PSS

Research Progress on a Novel Conductive Polymer–poly(3,4-Ethylenedioxythiophene) (PEDOT)

Application of PEDOT:PSS and Its Composites in Electrochemical and Electronic Chemosensors

Achieving Free-Standing PEDOT:PSS Solar Generators with Efficient All-in-One Photothermoelectric Conversion

Polymer-derived carbon materials for energy storage devices: A mini review