Abstract:Consideration of a core and mantle configuration for individual grains is a prominent method to capture the grain size-dependence in the constitutive models for polycrystal material. The mantle represents a region of the grain volume near the grain boundary where mechanical deformation is influenced by the grain boundaries, while the core represents the inner region of the grain volume. The grain size-dependence is then realized by assigning a set of values for the mechanical properties in the mantle that are different from those of the core region. However, these values for the mechanical properties of the mantle region are typically chosen arbitrarily, guided solely by the quality of the agreement between a model's predicted stress-strain behavior with that obtained experimentally. In the present study, a physics-based method to develop the grain size-dependent crystal plasticity constitutive model on the core and mantle configuration for polycrystal materials is presented. The method is based on the assumption that any resistance to dislocation nucleation and motion in a material manifests as an increase in yield strength and a decrease in strain-hardening modulus, and the mutual relationship between yield strength and strain-hardening is an inherent material property that determines the plasticity of that specific material. Accordingly, the same single crystal plasticity constitutive model that describes the behavior of the material under loading can be used to capture the increased resistance to dislocation nucleation and motion in the grain boundary influence region. The physics-based modeling is facilitated by introducing a shear flow strain distribution in the phenomenological formulation and a pile-up of dislocation density distribution in the dislocation based formulation, such that, the resulting variations in the yield strength and the strain-hardening modulus are identical to that produced by the increased resistance in the grain boundary influence region. Thus, the increase in strength and the decrease in the strain-hardening modulus, determined as spatially varying local material properties in the mantle, are mutually related through the grain size-independent inherent plastic properties specific to the material. A simplified model that considers the grain boundary effect averaged over the grain volume is also developed under this general framework. Implementation of this simplified model is demonstrated by considering the case of a power law flow rule and a hyperbolic-secant hardening rule for the phenomenological formulation, and Taylor strength relation for the dislocation based formulation. Finally, the grain size-dependent constitutive model is validated by comparing the predicted stress-strain behavior of polycrystal copper samples under uniaxial loading with experimental results.

A Nonclassical Constitutive Model for Crystal Plasticity and Its Application

A new approach to the analysis of poly crystal plasticity

On plastic anisotropy of constitutive model for rate-dependent single crystal

Anisotropic Damage Model under Continuum Slip Crystal Plasticity Theory for Single Crystals

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

ANALYSIS OF CYCLIC PLASTICITY USING A POLYCRYSTALLINE MODEL TAKING ACCOUNT OF SIZE EFFECT

Analysis for Polycrystal Nonproportional Cyclic Plasticity with a Dissipated Energy Based Rule for Cross-Hardening

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

4223 - ANALYSIS ON CYCLIC PLASTICITY AND STRESS DISTRIBUTION OF POLYCRYSTAL AT GRAIN LEVEL

A Constitutive Model for Dynamic Plasticity of FCC Metals

Analysis Of Polycrystal Cyclic Plasticity With A Nonclassical Hardening Law And Hill'S Self-Consistent Scheme

On Analysis of the Elasto‐viscoplastic Response of Single Crystals with Anisotropic Damage: Constitutive Modelling and Computational Aspects

Mesoscopic mechanical constitutive relation of cyclic plasticity for nickel based polycrystalline superalloy

Grain size-dependent crystal plasticity constitutive model for polycrystal materials

Orientation-dependent Constitutive Model with Nonlinear Elasticity for Shocked Β-Hmx Single Crystal

Crystal Plasticity Constitutive Model for BCC Based on the Dislocation Density

Computer simulation of sheet metal forming processes using crystalline plasticity

Stability of Crystal Plasticity Constitutive Models: Observations in Numerical Studies and Analytical Justification

A Crystal Plasticity Model of Low Cycle Fatigue Damage Considering Dislocation Density, Stress Triaxiality and Lode Parameter

An Elasto-Viscoplastic Self-Consistent Model for Polycrystalline Material with Imperfect Interface under Coupled Thermo-Mechanical Loads

Anisotropic Constitutive Model and Numerical Simulations for Crystalline Energetic Material under Shock Loading