Effect of Calcination Conditions on the Activity of Activated Carbon Supported with Ruthenium Catalyst for Bromate Reduction

Jia ZHU,Zi-jun DONG,Yi TAO,Wen-yi DONG
DOI: https://doi.org/10.13198/j.issn.1001-6929.2014.08.16
2014-01-01
Abstract:To obtain an activated carbon supported with ruthenium catalyst (Ru/AC) with high catalytic properties for bromate reduction, the effects of calcination conditions on the activity of Ru/AC were investigated. The catalyst was prepared by iso-volumetric impregnation method, in which RuCl3·3H2O was used as a precursor and AC as a support. The properties of the catalyst were characterized by XPS (X-ray photoelectron spectra), BET (brunner-emmet-teller method) and SEM (scanning electronic microscopy). The results revealed that the activities of Ru/AC prepared in different calcination atmospheres were obviously different. Ru/AC calcinated in N2 atmosphere showed the highest activity, because it was easy to form RuO2, which is the effective component for removing bromate. Vacuum atmosphere was apparently not beneficial for the active components formation. However, in the atmosphere of H2-N2(φ(H2) 1.5% and φ(N2) 98.5%), two active components were observed: metallic Ru and RuO2. The calcination temperature greatly affected the activity of the catalyst. The AC support was enhanced under the carbon graphitization at a high temperature, but agglomeration of particles occurred after the temperature increased to 1000 ℃. Thus the optimal calcination temperature was around 900 ℃. The calcination time affected the structure of the support AC and the particle size and dispersion of RuO2. When calcination time was 3 h, both the BET surface area and pore volume of Ru/AC was increased, and RuO2 particles were well distributed on/within AC surface or internal pores. Therefore, the optimal calcination condition of Ru/AC catalyst is that the calcination atmosphere is N2, the calcination temperature is 900 ℃ and calcination time is 3 h. Under this optimal condition, all the bromate could be removed by the Ru/AC in 2 h.
What problem does this paper attempt to address?