Abstract:Environmentally friendly lead-free dielectric ceramics have attracted wide attention because of their outstanding power density, rapid charge/dischargerate, and superior stability. Nevertheless, as a hot material in dielectric ceramic capacitors, the energy storage performance of Na0.5Bi0.5TiO3-based ceramics has been not satisfactory because of their higher remnant polarization value and low dielectric breakdown strength, which is a problem that must be urgently overcome. In this work, the (1 - x) (0.6Na0.5Bi0.5TiO3 - 0.4Sr0.7Bi0.2TiO3) - xBa(Mg1/3Ta2/3)O3 (BNST-xBMT) systems were designed based on a dual optimization strategy of domain and bandgap to solve the above problems. As a result, a record-breaking ultrahigh energy density and excellent efficiency (Wrec = 8.58 J/cm3, η = 93.5%) were obtained simultaneously under 565 kV/cm for the BNST-0.08BMT ceramic. The introduction of Sr0.7Bi0.2TiO3 induces the formation of nanodomains in BNT-based ceramics, leading to slim P-E curves, and the further modification of Mg/Ta reduces the grain sizes and increases the bandgap width, resulting in significant enhancement of the dielectric breakdown strength. Moreover, excellent stability and superior discharge performance (Wd = 4.7 J/cm3, E = 320 kV/cm) in the BNST-0.08BMT ceramic were also achieved. The results suggest that the BNST-0.08BMT ceramic shows potential applicability for dielectric energy storage ceramics. Simultaneously, the composition-design concept in the system provides a good reference for the further development of ceramic dielectric capacitors.

Structure and energy storage properties of Mn-doped (Ba,Sr)TiO 3 –MgO composite ceramics

Structure-design Strategy of 0–3 Type (bi0.32sr0.42na0.20)tio3/mgo Composite to Boost Energy Storage Density, Efficiency and Charge-Discharge Performance

Improving Energy Storage Performance of Barium Titanate-Based Ceramics by Doping MnO2

Defect Dipoles Induced High‐energy Storage Density in Mn‐doped BST Ceramics Prepared by Spark Plasma Sintering

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

The enhancement of energy storage performance in high-entropy ceramic

Enhanced recoverable energy storage density and efficiency in (1-<i>x</i>)Ba<sub>0.85</sub>Ca<sub>0.15</sub>Zr<sub>0.1</sub>Ti<sub>0.9 </sub>O<sub>3</sub>-<i>x</i>SrTiO<sub>3</sub>-MnO<sub>2</sub> lead-free ceramics

Improved Energy Storage Density performance of the (1-x) [0.88BaTiO3–0.12Bi(Li0.5Nb0.5)O3]-x(0.8BaTiO3–0.2SrTiO3) Lead-Free Ceramics

Enhanced Energy Storage Properties in MgO-doped BaTiO3 Lead-Free Ferroelectric Ceramics

Ultrahigh Energy Storage Density and Efficiency in Bi 0.5 Na 0.5 TiO 3 -Based Ceramics via the Domain and Bandgap Engineering

Enhanced Energy Storage Density of Ba0.4Sr0.6TiO3–MgO Composite Prepared by Spark Plasma Sintering

Ultrahigh energy density and efficiency of BaTiO 3 -based ceramics via multiple design strategies

Enhanced energy storage performance of BaTi0.97Ca0.03O2.97-based ceramics by doping high-entropy perovskite oxide

Realizing ultrahigh breakdown strength and ultrafast discharge speed in novel barium titanate-based ceramics through multicomponent compounding strategy

Ultrahigh Energy Storage Density and Efficiency in Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-Based Ceramics via the Domain and Bandgap Engineering

Ultrahigh Energy-Storage Density of BaTiO3-Based Ceramics Via the Interfacial Polarization Strategy.

High-temperature BaTiO3-based ternary dielectric multilayers for energy storage applications with high efficiency

Enhanced energy storage density and efficiency in lead-free Bi(Mg1/2Hf1/2)O3-modified BaTiO3 ceramics

Dielectric and energy storage properties of ternary doped barium titanate-based ceramics

Lead-free X8R-type 0.92Ba0.8Sr0.2TiO3-0.08Bi(Mg0.5Zr0.5)O3 dielectric energy-storage ceramics for pulsed power capacitors

High-performance Energy Storage in BaTiO3-based Oxide Ceramics Achieved by High-Entropy Engineering