Abstract:The utilization of nanofluid is found to considerably enhance the heat transfer performance. The present study fabricated a hybrid Al2O3-CuO/water nanofluid and investigated its turbulent thermal and flow performance in a circular tube. Experimentally, the heat transfer coefficient and pressure drop of hybrid nanofluids with mass concentrations ranging from 0.5% to 3% were measured under different Reynolds number. The effect of selection of thermophysical property models on performance was also concerned. Numerically, Computational Fluid Dynamics (CFD) simulations based on Discrete Phase Model (DPM), mixture and Eulerian multiphase model were conducted and compared. Results reveal a relative enhancement of 2%-35% in heat transfer performance of hybrid nanofluid under various flow rates. In addition, the enhancement tends to increase with the increment of nanofluid concentration and decrement of flow rate. The pressure drop also shows different degrees of enlargement up to 12%. Different thermophysical property models lead to different Nusselt and Reynolds numbers, which results to various levels of deviations among different models. Generally, the thermal and flow characteristics adopting different models have similar trend but different magnitudes. By selecting certain models, the thermal performance factor has a value in the range of 1.01-1.29 and shows an increment with the increase of concentration and decrease of Reynolds number. The developed CFD models show desirable prediction accuracies for experimental heat transfer coefficient but seriously underestimate the pressure drop. Specifically, the Eulerian model exhibits the smallest deviation of 8.1% with the experimental heat transfer coefficient followed by the mixture model and DPM with the derivations of 10.2% and 12.5% respectively. The present study can help to understand the heat and flow behaviour of hybrid nanofluid in heat transfer devices.

Flow Drag and Heat Transfer Characteristics of Drag-Reducing Nanofluids with CuO Nanoparticles

Convective Heat Transfer and Resistance Characteristics of Nanofluids with Cylindrical Particles

Flow and Heat Transfer Characteristics of Nanofluids Containing Rod-Like Particles in a Turbulent Pipe Flow

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Convective heat transfer and flow characteristics of Cu-water nanofluid

Heat Transfer Properties of CuO-water Nanofluids in Laminar Flow

Experimental study on the characteristics of heat transfer and flow resistance in turbulent pipe flows of viscoelastic-fluid-based Cu nanofluid

Application of aqueous nanofluids in a horizontal mesh heat pipe

Turbulent heat transfer and flow analysis of hybrid Al2O3-CuO/water nanofluid: An experiment and CFD simulation study

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

Experimental study on the flow and heat transfer characteristics of nanofluids in double-tube heat exchangers based on thermal efficiency assessment

Pressure Drop and Heat Transfer of Nanofluid in Turbulent Pipe Flow Considering Particle Coagulation and Breakage

Friction Factor and Heat Transfer of Nanofluid in the Turbulent Flow Through a 90° Bend

Flow And Heat Transfer Enhancement Of Nanofluids In Microchannel With Blocks And Grooves

Experimental investigation for heat transfer performance of CuO-water nanofluid in a double pipe heat exchanger

Experimental Study on the Convective Heat Transfer of Cuo-Water Nanofluid in A Turbulent Flow

Effective Thermal Conductivity of Nanofluid from Molecular Dynamics Simulations

Experimental Investigation of nanofluid heat transfer in a square cross-sectional duct

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Enhancing Closed System Efficiency through CuO Nanofluids: Investigating Thermophysical Properties and Heat Transfer Performance

Experimental study on cooling performance of nanofluid flow in a horizontal circular tube