Abstract:Semiconductor photodetectors can work only in specific material-dependent light wavelength ranges, connected with the bandgaps and absorption capabilities of the utilized semiconductors. This limitation has driven the development of hybrid devices that exceed the capabilities of individual materials. In this study, for the first time, a hybrid heterojunction photodetector based on methylammonium lead bromide (MAPbBr3) polycrystalline film deposited on gallium arsenide (GaAs) was presented, along with comprehensive morphological, structural, optical, and photoelectrical investigations. The MAPbBr3/GaAs heterojunction photodetector exhibited wide spectral responsivity, from 540 to 900 nm. The fabrication steps of the prototype device, including a new preparation recipe for the MAPbBr3 solution and spinning, will be disclosed and discussed. It will be shown that extending the soaking time and refining the precursor solution's stoichiometry may enhance surface coverage, adhesion to the GaAs, and film uniformity, as well as provide a new way to integrate MAPbBr3 on GaAs. Compared to the pristine MAPbBr3, the enhanced structural purity of the perovskite on GaAs was confirmed by X-ray Diffraction (XRD) upon optimization compared to the conventional glass substrate. Scanning Electron Microscopy (SEM) revealed the formation of microcube-like structures on the top of an otherwise continuous MAPbBr3 polycrystalline film, with increased grain size and reduced grain boundary effects pointed by Energy-Dispersive Spectroscopy (EDS) and cathodoluminescence (CL). Enhanced absorption was demonstrated in the visible range and broadened photoluminescence (PL) emission at room temperature, with traces of reduction in the orthorhombic tilting revealed by temperature-dependent PL. A reduced average carrier lifetime was reduced to 13.8 ns, revealed by time-resolved PL (TRPL). The dark current was typically around 8.8 × 10-8 A. Broad photoresponsivity between 540 and 875 nm reached a maximum of 3 mA/W and 16 mA/W, corresponding to a detectivity of 6 × 1010 and 1 × 1011 Jones at -1 V and 50 V, respectively. In case of on/off measurements, the rise and fall times were 0.40 s and 0.61 s or 0.62 s and 0.89 s for illumination, with 500 nm or 875 nm photons, respectively. A long-term stability test at room temperature in air confirmed the optical and structural stability of the proposed hybrid structure. This work provides insights into the physical mechanisms of new hybrid junctions for high-performance photodetectors.

Solution-processed photodetectors based on organic-inorganic hybrid perovskite and nanocrystalline graphite

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

Large-Area Periodic Organic-Inorganic Hybrid Perovskite Nanopyramid Arrays for High-Performance Photodetector and Image Sensor Applications

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI3 Perovskite Nanorods Bilayer Structure

Nanocrystalline Perovskite Hybrid Photodetectors with High Performance in Almost Every Figure of Merit

High‐Performance MAPbI3/PM6:Y6 Perovskite/Organic Hybrid Photodetectors with a Broadband Response

High performance UV–vis–NIR photodetectors based on ZnO/organic–inorganic Sn–Pb hybrid perovskite heterojunction

Hybrid Organolead Halide Perovskite Microwire Arrays/single CdSe Nanobelt for a High-Performance Photodetector

Organic-inorganic Hybrid Sn-based Perovskite Photodetectors with High External Quantum Efficiencies and Wide Spectral Responses from 300 to 1000 Nm

High Performance Photomultiplication Perovskite Photodetectors with PC60BM and NPB As the Interlayers

Physical Properties of an Efficient MAPbBr3/GaAs Hybrid Heterostructure for Visible/Near-Infrared Detectors

Solution‐Processed, Self‐Powered Broadband CH 3 NH 3 PbI 3 Photodetectors Driven by Asymmetric Electrodes

High-Performance Broadband Photodetectors Combining Perovskite and Organic Bulk Heterojunction Bifunctional Layers

High‐Performance Self‐Powered Photodetectors with Space‐Confined Hybrid Lead Halide Perovskite Nanocrystals

High‐Responsivity Photodetectors Based on Formamidinium Lead Halide Perovskite Quantum Dot–Graphene Hybrid

High-Performance Near-Infrared Photodetectors Based on the Synergy Effect of Short Wavelength Light Filter and Long Wavelength Response of a Perovskite/Polymer Hybrid Structure

High-Detectivity and Stable Planar MAPbI₃/IDT-BT Photodetectors with Assisted MoO₃ Interlayer

Solution-processed Flexible MAPbI3 Photodetectors with ZnO Schottky Contacts.

Perovskite/GaAs-nanowire hybrid structure photodetectors with ultrafast multiband response enhancement by band engineering

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Highly controllable synthesis of MAPbI<sub>3</sub> perovskite nanocrystals with long carrier lifetimes and narrow band gap for application in photodetectors