Abstract:Cu3SbSe4, featuring its earth-abundant, cheap, nontoxic and environmentally friendly constituent elements, can be considered as a promising intermediate temperature thermoelectric (TE) material. Herein, a series of p-type Bi-doped Cu3Sb1−xBixSe4 (x = 0–0.04) samples were fabricated through melting and hot pressing process, and the effects of isovalent Bi-doping on their TE properties were comparatively investigated by experimental and computational methods. TEM analysis indicates that Bi-doped samples consist of Cu3SbSe4 and Cu2−xSe impurity phases, which is in good agreement with the results of XRD, SEM and XPS. For Bi-doped samples, the reduced electrical resistivity (ρ) caused by the optimized carrier concentrations and enhanced Seebeck coefficient derived from the densities of states near the Fermi level give rise to a high power factor of ~ 1000 µWm−1 K−2 at 673 K for the Cu3Sb0.985Bi0.015Se4 sample. Additionally, the multiscale defects of Cu3SbSe4-based materials involving point defects, nanoprecipitates, amorphous phases and grain boundaries can strongly scatter phonons to depress lattice thermal conductivity (κlat), resulting in a low κlat of ~ 0.53 Wm−1 K−1 and thermal conductivity (κtot) of ~ 0.62 Wm−1 K−1 at 673 K for the Cu3Sb0.98Bi0.02Se4 sample. As a consequence, a maximum ZT value ~ 0.95 at 673 K is obtained for the Cu3Sb0.985Bi0.015Se4 sample, which is ~ 1.9 times higher than that of pristine Cu3SbSe4. This work shows that isovalent heavy element doping is an effective strategy to optimize thermoelectric properties of copper-based chalcogenides.

Transport Properties of Ni, Co, Fe, Mn Doped Cu0.01Bi2Te2.7Se0.3 for Thermoelectric Device Applications

Light Element Doping and Introducing Spin Entropy: an Effective Strategy for Enhancement of Thermoelectric Properties in BiCuSeO.

Effects of Nb doping on the thermoelectric performance of CuI doped n-type Bi2Te3

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu1.8S Via Carrier Concentration Regulation and Multiscale Phonon Scattering

Roles of Cu in the Enhanced Thermoelectric Properties in Bi0.5Sb1.5Te3

Enhanced Thermoelectric Performance of Bi–Se Co-Doped Cu 1.8 S via Carrier Concentration Regulation and Multiscale Phonon Scattering

Isotropic Thermoelectric Performance of Layer-Structured n-Type Bi 2 Te 2.7 Se 0.3 by Cu Doping

Roles of concentration-dependent Cu doping behaviors on the thermoelectric properties of n-type Mg3Sb1.5Bi0.5

Highly Enhanced Thermoelectric and Mechanical Properties of Bi-Sb-Te Compounds by Carrier Modulation and Microstructure Adjustment

Enhancement of thermoelectric properties over a wide temperature range by lattice disorder and chemical potential tuning in a (CuI) y (Bi2Te3)0.95- x (Bi2Se3) x (Bi2S3)0.05 quaternary system

High Thermoelectric Performance in Cu-Doped Bi 2 Te 2.7 Se 0.33 Due to Cl Doping and Multiscale AgBiSe 2

Enhanced thermoelectric performance of Cu12Sb4S13-delta tetrahedrite via nickel doping

Simple tuning of carrier type in topological insulator Bi2Se3 by Mn doping

P-type doping of transition metal elements to optimize the thermoelectric properties of CuGaTe2

Influence of Cu Diffusion on Electrical Transport Properties of Bi0.5Sb1.5Te3

Enhanced Thermoelectric Properties of Cu3SbSe4 Compounds by Isovalent Bismuth Doping

Enhanced thermoelectric performance of Cu12Sb4S13___etrahedrite via nickel doping

Structural features and thermoelectric performance of Sb- and Bi-doped Cu2SnSe3 compounds

Investigation of electron and phonon transport in Bi-doped CaMnO$_3$ for thermoelectric applications

Simultaneously optimized thermoelectric performance of n-type Cu2Se alloyed Bi2Te3

Modulation Doping of P-Type Cu12Sb4S13 Toward Improving Thermoelectric Performance