Abstract:Over the last two decades, office floors have been built progressively lightweight with increasing spans and slenderness. Therefore, vibration performance of office floors due to walking dynamic loads is becoming their governing design criterion, determining their size and shape, and therefore overall weight and embodied energy of the building. To date, floor design guidelines around the world recommend walking load scenarios in offices featuring some or all of the following standard characteristics: (a) walking loads are assumed to be periodic dynamic excitation represented by the Fourier series, including harmonics corresponding to up to the first four integer multiples of the pacing frequency of which at least one is exciting the floor at a resonant frequency and (b) single person walking. However, the literature surveyed provides evidence that such assessment methodology is potentially an over-simplification which does not reflect real walking load scenarios, since crucial features of the floor vibration source, path and receiver are missing. First, in terms of vibration source, realistic scenarios need to feature (a) moving rather than stationary walking forces, (b) stochastic nature of human gait, (c) simultaneous multi-person walking and (d) human–structure interaction. Second, for the transmission path (i.e. office floor structure), two features are needed to consider: (a) realistic office floor layouts and (b) presence, or absence, of non-structural elements. Finally, for the vibration receivers (i.e. floor occupants), (a) vibrations calculated at floor locations occupied by users (instead of at the potential highest response location which may not be occupied), (b) actual period over which occupants feel vibration due to such excitation and (c) assessment of vibration levels based on their probability of occurrence. This study therefore addresses these seldom considered but increasingly important features and discusses realistic approaches to floor design for vibration serviceability.

APPLICATION OF RANDOM WALKING FORCE IN FLOOR VIBRATION SERVICEABILITY ASSESSMENT

Vibration Serviceability Assessment Method for Floor Structures Based on Random Walking Force and Annoyance Rate

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Probability Distribution of Footbridge Peak Acceleration to Single and Multiple Crossing Walkers

Deterministic and Probabilistic Serviceability Assessment of Footbridge Vibrations Due to a Single Walker Crossing

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Vibration Serviceability Analysis of Floor Structures under Pedestrian Loads

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Study on Natural Frequency of Concrete Floor Based on Vibration Serviceability

Approximately Analytical Procedure to Evaluate Random Stick-Slip Vibration of Duffing System Including Dry Friction

Dynamic Response Analysis of the Floor Structure under Random Crowd Excitation

Analysis of Response Spectrum for Random Pedestrian Loads

Vibration serviceability assessment of office floors for realistic walking and floor layout scenarios: Literature review

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

RANDOM VIBRATION OF FOOTBRIDGE GENERATED BY CROWDS' TWO-WAY WALKING

Resistance model for vibration serviceability design of engineering structures

Stochastic Vibration of a Long-Span Floor under Crowd-Induced Rhythmic Excitation

Response Of Multiple-Degree-Of-Freedom Flexible Structures To Random Excitation

A Monte Carlo simulation method for non-random vibration analysis

Time-Dependent Reliability Analysis of Vibratory Systems With Random Parameters