Abstract:The pseudocapacitive materials, like spinel NiCo2O4 (NCO), that use Faradaic reactions to store charge have been widespread paid attention for supercapacitors application. So, it is a basic fundamental guideline that the preparation of higher-performance pseudocapacitive materials depends on achieving and accelerating more Faradaic reactions in the aspect of electrodes. In this work, based on the mentioned principle, we report a facile method that could significantly promote the capacity of NiCo2O4 nanoelectrode through annealing precursor nanowires (NWs) in different volume ratios of N-2 and O-2 condition. The pristine NCO (V-N2: V-O2 = 0: 1) only exhibited inferior performance with a specific capacitance of 0.88 F cm(-2) (338.5 F g(-1) at 2mA cm(-2)) and capacitive retention of 54% from 2 to 30mA cm(-2). While, for a comparison, the highest comprehensive performance of NCO-9 (V-N2: V-O2 = 9: 1) electrodes delivered superior specific capacitance of 3.8 F cm(-2) (1461 F g(-1) at 2mA cm(-2)), excellent rate retention of 77% and good cycling stability. These boosted pseudocapacitive properties both in capacity and rate capability are attributed to the severe oxygen vacancy defects introduced in nitrided NCO NWs. The involving richness-enabled oxygen defects significantly enhance the electron/ions transportation, and then efficiently alter the well-known capacitive surfacial reaction into bulk pattern in the charge-discharge cycles. This dramatically increased electron/ions kinetics and electrochemical cites for Faradaic reactions. These results provide a deep insight into correlating oxygen vacancies induced structural and chemical evolution on enhanced capacitive performances of redox-active-NiCo2O4 materials. (C) 2018 Elsevier Ltd. All rights reserved.

Nickel Oxide Aerogel for High Performance Supercapacitor Electrodes

Synthesis of Porous NiCo2S4 Aerogel for Supercapacitor Electrode and Oxygen Evolution Reaction Electrocatalyst

A Few Atoms Thick Nickel–Cobalt Oxides Mesoporous Nanosheets and Their Arrays on Ni Foam for Supercapacitors with Ultra-Long Cycling Lifespan

Efficient Utilization of Oxygen-Vacancies-enabled NiCo2O4 Electrode for High-Performance Asymmetric Supercapacitor

Characterization of NiCo2 O4 as high-performance supercapacitor electrode materials

Solution growth of NiO nanosheets supported on Ni foam as high-performance electrodes for supercapacitors

Carbon Nanotube Spaced Graphene Aerogels with Enhanced Capacitance in Aqueous and Ionic Liquid Electrolytes

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

Manganese oxide/nitrogen-doped carbon aerogels from cellulose nanofibrils for high-performance supercapacitor electrodes

Binder-Free Nickel Oxide Lamellar Layer Anchored CoOx Nanoparticles on Nickel Foam for Supercapacitor Electrodes

High Performance Porous Nickel Cobalt Oxide Nanowires for Asymmetric Supercapacitor

N-O-P co-doped porous carbon aerogel derived from low-cost biomass as electrode material for high-performance supercapacitors

Ultrathin Mesoporous Nio Nanosheet-Anchored 3d Nickel Foam As An Advanced Electrode For Supercapacitors

Nickel–Cobalt Hydroxide Microspheres Electrodepositioned on Nickel Cobaltite Nanowires Grown on Ni Foam for High-Performance Pseudocapacitors

Self-formed Porous Ni(OH)2 on Ni3S2/Ni Foam During Electrochemical Cycling for High Performance Supercapacitor with Ultrahigh Areal Capacitance

In situ growth of NiCo2O4 nanosheets arrays on Ni foam for high-performance supercapacitor

Supercapacitor performance of porous nickel cobaltite nanosheets

High-Performance Nickel Cobalt Hydroxide Nanosheets/Graphene/Ni foam Composite Electrode for Supercapacitor Applications

Research on NiOx Supercapacitor

Using metal–organic frameworks to create carbon-encased Ni@Ni(OH)2 for high-performance supercapacitors

High-Performance Asymmetric Supercapacitor Using Ni(OH) 2 –Carboxyl Graphene Porous Nanomaterial with a Nanosheet-Assembled Microstructure