Abstract:Nowadays, lithium-sulfur (Li-S) batteries have been considered as one of the most promising next-generation rechargeable batteries, owing to their high theoretical specific capacity of 1672 mAh g−1, high energy density of 2600 Wh kg−1, low-cost and abundant resources. However, the commercial application of Li-S batteries is still hindered by several problems, including insulativity of element sulfur, dissolution of polysulfides and large volume expansion. In addition, sulfur cathodes need be paired with metallic lithium, which tends to form dendrites on the anode surface during cycling resulting in safety problems. Therefore, fully lithiated state of sulfur-lithium sulfide (Li2S) is advantageous over sulfur, because it can paired with metal-free anodes (e.g. graphite, silicon and Sn) avoiding safety problems. In addition, Li2S shows a high theoretical specific capacity of 1166 mAh g−1 and a high melting point of 938°C. Moreover, when Li2S convers to S companying with volume shrinkage, which will not only creates enough space for volumetric expansion but also makes the structure more stable. However, similar to sulfur cathode, low conductivity of Li2S, low active material loading and polysulfide dissolution Li2S limit application of Li2S for high performance batteries. Consequently, it is important to introduce Li2S into three dimensional conductive matrix/host for high performance. Herein, we construct a 3D conductive network with high loading Li2S through a facile liquid solution-evaporation. The 3D conductive network not only possesses a hierarchical architecture with abundant macroporous channels and exhibits a high surface area, which provides enough reaction sites to load and stabilize high-loading Li2S, but also improves the electronic conductivity of Li2S and demonstrates pronounced electrochemical performance with enhanced cycle stability and a good capacity retention.

3D-Hybrid Material Design with Electron/lithium-Ion Dual-Conductivity for High-Performance Li-sulfur Batteries

A 3D Hybrid of Chemically Coupled Nickel Sulfide and Hollow Carbon Spheres for High Performance Lithium–Sulfur Batteries

3D Net-like GO-d-Ti3C2Tx MXene Aerogels with Catalysis/Adsorption Dual Effects for High-Performance Lithium-Sulfur Batteries

In Situ Polymerization of Nanostructured Conductive Polymer on 3D Sulfur/Carbon Nanofiber Composite Network as Cathode for High‐Performance Lithium–Sulfur Batteries

Three-dimensional Spongy Framework As Superlyophilic, Strongly Absorbing, and Electrocatalytic Polysulfide Reservoir Layer for High-Rate and Long-Cycling Lithium-Sulfur Batteries

Flexible CNT-Interpenetrating Hierarchically Porous Sulfurized Polyacrylonitrile (CIHP-SPAN) Electrodes for High-Rate Lithium-Sulfur (Li-S) Batteries

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Scalable SPAN Membrane Cathode with High Conductivity and Hierarchically Porous Framework for Enhanced Ion Transfer and Cycling Stability in Li–S Batteries

3D Conductive Network with High Loading Li<sub>2</sub>s for High Performance Lithium-Sulfur Batteries

Tailoring 3D Carbon Foam using CNTs and MnO 2 to Fabricate Stable Lithium/Dissolved Lithium Polysulfide Batteries

3D Holey Graphene/Polyacrylonitrile Sulfur Composite Architecture for High Loading Lithium Sulfur Batteries

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

3D conductive molecular framework derived MnO 2 /N, P co-doped carbon as sulfur hosts for high-performance lithium‐sulfur batteries

Super-aligned carbon nanotube/graphene hybrid materials as a framework for sulfur cathodes in high performance lithium sulfur batteries

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Rational design of Ni3(HITP)2@GO composite for lithium-sulfur cathode

A Facile Bottom-Up Approach to Construct Hybrid Flexible Cathode Scaffold for High-Performance Lithium-Sulfur Batteries

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

A three-dimensional conductive cross-linked all-carbon network hybrid as a sulfur host for high performance lithium-sulfur batteries