Abstract:A two-dimensional model for the simulation of solidification microstructure in multi-component alloy systems has been developed. The model is based on a cellular automaton (CA) technique for the calculation of the evolution of solid/liquid (S/L) interface. The dynamics of the interface is controlled by temperature, solute diffusion and Gibbs-Thomson effects. The diffusion equation for the temperature with release of latent heat on the S/L interface is valid in the entire domain, and the solute diffusion equation is also used in the entire domain through potential functions. Two methods are proposed to calculate the increment of the solid fraction. The first method is based on the level rule method similar to the one proposed by Jacot et al., but without the assumption of uniform temperature on the scale of the calculation domain. The second one is based on the calculation of the S/L interface velocity, which generalizes the results of Nastac and Beltran-Sanchez et al. for two-component alloy systems. If the concentration of one of the solutes tends to zero, both proposed methods reduce to the methods in Jacot et al. and Beltran-Sanchez et al. for two component alloy systems. Mesh independency is achieved by both methods and the dendritic morphologies obtained are the same if the mesh is fine enough. However, the morphologies of equiaxed dendrites calculated by using the interface velocity tends to the stable form more easily than those calculated using the level rule method as the mesh size is refined. For two-component alloy systems, the predictions of LGK theory for the steady-state tip velocity are compared with simulated values as a function of melt undercooling, which shows good agreement at very large range of undercooling. The simulated primary arm spacing in directional solidification is compared with experimental results for Fe-Si-Mg alloys and good agreement is also observed. It is noted that both methods for computing the solid fraction can be used for any multi-component alloy systems provided that the thermodynamic data are given

Liquid-liquid Phase Separation Process and Numerical Simulation of Microstructure of Al-In Immiscible Alloys

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Numerical Simulation of Macro-Segregation Formation During Solidification Process of Immiscible Alloys

Simulation for microstructure evolution of Al-Si alloys in solidification process

Computer Simulation of δ′(Al3Li) Phase Separation

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

Comparative Analysis of Isothermal and Non-Isothermal Solidification of Binary Alloys Using Phase-Field Model

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Three Dimensional Numerical Simulation of Solidification Microstructure of Single Phase Alloy

Precipitation Sequence of Middle Al Concentration Alloy Using the Inversion Algorithm and Microscopic Phase Field Model

Simulation of Nucleation and Coalescence of Second Phase Droplets During Earth-Based Solidification Process of Immiscible Alloys

Phase-field Simulation of Effect of Phase-field Parameters on Solidification Process of Multicomponent Alloys

Microstructure Evolution of Immiscible Alloys During Rapid Cooling Through Miscibility Gap

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

A Cellular Automaton Technique for the Modeling of Solidification Microstructure in Multi-Component Alloys

Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a Multicomponent Multiphase Model

Simulation of microstructures in solidification of aluminum twin-roll casting based on CA

Numerical Simulation of Macrosegregation in Steel Ingots Using A Two-Phase Model

Composition- and Temperature-Dependent Liquid Structures in Al–Cu Alloys: Anab Initiomolecular Dynamics and X-Ray Diffraction Study

Numerical Simulation of Directional Solidification Microstructure of Ti-45Al Alloy Based on CA Method

Phase-field Simulation of Solidification in Multicomponent Alloys Coupled with Thermodynamic and Diffusion Mobility Databases