Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Measurement of hydrogen release of cultural heritage materials during ion beam analysis using laser-induced breakdown spectroscopy of gas enhanced by solid initiator (GENS-LIBS)

Laser-induced breakdown spectroscopy for semi-quantitative and quantitative analyses of artworks—application on multi-layered ceramics and copper based alloys

Feasibility of Nanoparticle-Enhanced LIBS (NELIBS) for the analysis of archaeological metallic artifacts: a critical assessment

Enhancement of Laser-Induced Breakdown Spectroscopy (LIBS) Detection Limit Using a Low-Pressure and Short-Pulse Laser-Induced Plasma Process

Quantitative analysis of hydrogen isotopes in hydrogen storage material using laser-induced breakdown spectroscopy

Laser-induced Breakdown Spectroscopy: a New Approach for Nanoparticle's Mapping and Quantification in Organ Tissue.

Quantitative determination of hydrogen isotopes using laser-induced breakdown spectroscopy

Quantification of Lanthanides in a Molten Salt Reactor Surrogate Off-Gas Stream Using Laser-Induced Breakdown Spectroscopy

Homogeneity Measurements of Li-Ion Battery Cathodes Using Laser-Induced Breakdown Spectroscopy

Optimization and Investigation of Parameters for Underwater Fiber-Optic LIBS Systems

Multi-spectroscopic characterization system for cultural heritage materials analysis (SYSPECTRAL): Conception and example

Fast quantitative determination of platinum in liquid samples by laser-induced breakdown spectroscopy

Effects of Laser Wavelength on Measurement of Trace Elements in Gas Using LIBS

Improvement of laser induced breakdown spectroscopy signal using gas mixture

Highly Sensitive and Stable Analysis of Trace Arsenic(iii) and Mercury(ii) in Water by Low-pulse-energy (15 Mj) Laser-Induced Breakdown Spectroscopy Assisted by Active Controllable Spark Discharge and Electrochemical Enrichment

Exploring the Impact Mechanism of Ambient Gas Properties on Laser-Induced Breakdown Spectroscopy to Guide the Raw Signal Improvement

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Sensitive Measurement of Trace Mercury Using Low Pressure Laser-Induced Plasma

Experimental Study on Mercury Content in Flue Gas of Coal-Fired Units Based on Laser-Induced Breakdown Spectroscopy

Development of Laser Induced Breakdown Spectroscopy Systems for Nuclear Power Plants

Field-portable and handheld laser-induced breakdown spectroscopy: Historical review, current status and future prospects