Abstract:Micro-crack propagation in polycrystalline materials can strongly depend on the defect size and its ratio to specimen size, and local variation in the microstructural features such as grain orientation, size, etc. While the dependencies are understood heuristically, the use of mechanistic models to capture the effect of various factors influencing micro-crack propagation can enable accurate prediction of fracture properties of polycrystalline materials and their engineering. To this end, a crystal plasticity coupled to damage model for micro-crack propagation on cleavage planes has been developed in this work and is shown to successfully capture the grain orientation dependent growth. In order to identify a suitable integration scheme for the coupled model, a one-dimensional model is developed and a detailed comparative analysis of three different schemes is performed. The analysis shows that the coupled explicit–implicit scheme is the most suitable and is a key finding of this work. Subsequently, a two-scale multi-scale method has been developed to include the interaction between the defect, its surrounding microstructure and the specimen. The two-scale method along with the coupled crystal plasticity-damage model has been applied to perform finite element method based micro-crack growth simulations for a microstructurally short and physically long crack with two different microstructures with random orientation and texture. Such a study comparing microstructural effects on crack growth from pre-existing defects of drastically disparate sizes hasn't been performed before and is a novelty of this work. The analyses clearly show that though the micro-crack path from long crack is different depending on the orientation distribution, the rates are nearly independent of the local behavior. Moreover, the micro-crack propagation rate from long crack is significantly larger at the initial stages, with the latter showing significant acceleration after a small growth. Overall, the influence of microstructure on the crack growth behavior is stronger for short cracks, which conform with experimental observations and is successfully captured by the proposed model.

Microscopic fatigue crack propagation model for polycrystalline alloys

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Fatigue crack propagation within Al-Cu-Mg single crystals based on crystal plasticity and XFEM combined with cohesive zone model

Meso-scale low-cycle fatigue damage of polycrystalline nickel-based alloy by crystal plasticity finite element method

Coupled crystal plasticity and damage model for micro crack propagation in polycrystalline microstructures

Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells

An Insight into the Creep-Fatigue Damage Localization in Welded Joints Based on Crystal Plasticity Finite Element Method

Mixed mode crack growth behaviour considering plasticity-induced and roughness-induced closure

Numerical assessment on fatigue damage evolution of materials at crack tip of CT specimen based on CPFEM

A finite strain micromechanical-based constitutive model: Application to porous polycrystal

Multiscale crystal-plasticity phase field and extended finite element methods for fatigue crack initiation and propagation modeling

A Methodology for Incorporating the Effect of Grain Size on the Energy Efficiency Coefficient for Fatigue Crack Initiation Estimation in Polycrystalline Metal

Insights on low cycle fatigue crack formation and propagation mechanism: A microstructurally-sensitive modeling

Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718

Experimental and crystal plasticity modelling study on the crack initiation in micro-texture regions of Ti-6Al-4V during high cycle fatigue tests

Fatigue Crack Propagation in Heterogeneous Materials under Remote Cyclic Loading

Study on the crack nucleation mechanism of Ti-2Al-2.5Zr alloy in low cycle fatigue: Quasi in-situ experiments and crystal plasticity simulation

Microstructure sensitivity of the low cycle fatigue crack initiation mechanisms for the Al 0.3 CoCrFeNi high entropy alloy: in-situ SEM study and crystal plasticity simulation

Microstructural size effect on the notch fatigue behavior of a Ni-based superalloy using crystal plasticity modelling approach

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys