Abstract:Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid–base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm<sup>2</sup>, a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00729?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00729</a>.Detailed experimental procedures including materials, PSC device fabrication and characterization, and the detailed data of DFT calculation, UV–vis absorption, FTIR, XRD, and AFM morphology characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00729/suppl_file/am1c00729_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material

Polymeric, Cost-Effective, Dopant-Free Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Stable High-Performance Hybrid Perovskite Solar Cells with Ultrathin Polythiophene As Hole-Transporting Layer

Ultrathin Hole Extraction Layer for Efficient Inverted Perovskite Solar Cells

Energy Level Tuning in CsPbBr3 Perovskite Solar Cells through In Situ-Polymerized PEDOT Hole Transport Layer

Dopant-Free Hole-Transporting Material Based on Poly(2,7-(9,9-bis(N,N-di-p-methoxylphenylamine)-4-phenyl))-fluorene for High-Performance Air-Processed Inverted Perovskite Solar Cells

Highly Efficient p-i-n Perovskite Solar Cells Utilizing Novel Low-Temperature Solution-Processed Hole Transport Materials with Linear π-Conjugated Structure

Efficient bifacial perovskite solar cell based on a highly transparent poly(3,4-ethylenedioxythiophene) as the p-type hole-transporting material

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Efficient Perovskite Solar Cells Employing a Solution-Processable Copper Phthalocyanine As a Hole-Transporting Material

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells

Pyrene-Cored Hole-Transporting Materials for Efficient and Stable Perovskite Solar Cells

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

Non-Conjugated Polymer As an Efficient Dopant-Free Hole-Transporting Material for Perovskite Solar Cells.

Self-Doping a Hole-Transporting Layer Based on a Conjugated Polyelectrolyte Enables Efficient and Stable Inverted Perovskite Solar Cells

PEDOT:PSS‐Metal Oxide Composite Electrode with Regulated Wettability and Work Function for High‐Performance Inverted Perovskite Solar Cells

Efficient P-I-n Structured Perovskite Solar Cells Employing Low-Cost and Highly Reproducible Oligomers As Hole Transporting Materials

High-performance hybrid perovskite solar cells with polythiophene as hole-transporting layer via electrochemical polymerization

A Low-Cost and Non-Noble Metal Catalyst Synthesis of Phenothiazine-Based Polymer HTM for Efficient and Stable Perovskite Solar Cells

Low Work-function Poly(3,4-ethylenedioxylenethiophene): Poly(styrene Sulfonate) As Electron-transport Layer for High-efficient and Stable Polymer Solar Cells.

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)–molybdenum oxide composite films as hole conductors for efficient planar perovskite solar cells