Abstract:Conductive polyelectrolytes such as P3CT-Na have been widely used as efficient hole-transporting layers (HTLs) in inverted perovskite solar cells (PSCs) due to their high hole mobility. However, the acid–base neutralization reaction is indispensable for preparing such polyelectrolytes and the varied content of cations usually leads to poor reproducibility of the device performance in PSCs. In this work, a commercially available polymer poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT) was directly applied as an HTL in PSCs for the first time. Encouragingly, it was found that due to the dual functionality of carboxyl groups on side chains, a thin layer of P3CT can not only strongly anchor on ITO electrode and optimize its work function but also show an effective passivation effect toward perovskite active layer. Benefiting from such dual functionality, a uniform perovskite film with better quality was obtained on P3CT. As a result, the P3CT-based PSCs show much lower nonradiative recombination and achieve a champion power conversion efficiency (PCE) of 21.33% with a high fill factor (FF) of 83.6%. Impressively, as the device area is increased to 0.80 cm<sup>2</sup>, a PCE of 19.65% can still be obtained for the PSCs based on P3CT HTL. Our work provides important strategy for developing HTLs for high-performance PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00729?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00729</a>.Detailed experimental procedures including materials, PSC device fabrication and characterization, and the detailed data of DFT calculation, UV–vis absorption, FTIR, XRD, and AFM morphology characterization (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00729/suppl_file/am1c00729_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient bifacial perovskite solar cell based on a highly transparent poly(3,4-ethylenedioxythiophene) as the p-type hole-transporting material

Bifacial Dye-Sensitized Solar Cells Using Highly Transparent PEDOT:PSS Films As Counter Electrodes

Multi-layer transparent electrodes for high performance bifacial perovskite solar cells

Perovskite hetero-bilayer for efficient charge-transport-layer-free solar cells

High‐Performance Semitransparent and Bifacial Perovskite Solar Cells with MoO x /Ag/WO x as the Rear Transparent Electrode

Hierarchical Dual‐Scaffolds Enhance Charge Separation and Collection for High Efficiency Semitransparent Perovskite Solar Cells

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

A Newly Crosslinked‐double Network PEDOT:PSS@PEGDMA toward Highly‐Efficient and Stable Tin‐Lead Perovskite Solar Cells

A Comprehensive Guide to Bifacial Perovskite Solar Cells: Simulation and Optimization

Stable High-Performance Hybrid Perovskite Solar Cells with Ultrathin Polythiophene As Hole-Transporting Layer

Honeycomb-like Poly(3,4-Ethylenedioxythiophene) As an Effective and Transparent Counter Electrode in Bifacial Dye-Sensitized Solar Cells

Highly efficient bifacial semitransparent perovskite solar cells based on molecular doping of CuSCN hole transport layer

Bifacial Modified Charge Transport Materials for Highly Efficient and Stable Inverted Perovskite Solar Cells

Enhanced efficiency of bifacial perovskite solar cells using computational study

Flexible, Transparent, and Bifacial Perovskite Solar Cells and Modules Using the Wide-Band Gap FAPbBr 3 Perovskite Absorber

Enhanced Efficiency of Semitransparent Perovskite Solar Cells via Double-Sided Sandwich Evaporation Technique for Four Terminal Perovskite-Silicon Tandem Application

Efficient Charge Transport in Inverted Perovskite Solar Cells via 2D/3D Ferroelectric Heterojunction

High-performance bifacial perovskite solar cells enabled by single-walled carbon nanotubes

High Stable Bifacial Irradiated Triple-Mesoporous Perovskite Solar Cells Based on AgNWs@PEDOT Composite Electrodes

A Dual-Functional Conjugated Polymer as an Efficient Hole-Transporting Layer for High-Performance Inverted Perovskite Solar Cells

Dopant-Free Hole-Transporting Material Based on Poly(2,7-(9,9-bis(N,N-di-p-methoxylphenylamine)-4-phenyl))-fluorene for High-Performance Air-Processed Inverted Perovskite Solar Cells