Abstract:Enhanced transparency, conductivity, and stability are some of the most important factors to consider in order to prepare transparent electrodes (TEs) and hole transport layer (HTL) for organic solar cells. In this study, the transparency, optical, and electrical behavior of hybrid films formed by poly(3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and heptacoordinated organotin (IV) complexes was improved by introducing graphene. The films were deposited by spin-coating and subsequently characterized by infrared and Raman spectroscopy, and by scanning electron microscopy (SEM) and atomic force microscopy (AFM). All the hybrid films transmitted more than 70% of light in the 600–1,000 nm wavelength region, and the optical band gap obtained is in the range of 2.64 and 3.09 eV. In addition, bathophenanthroline (BPhen) was introduced as an electron transport layer (ETL) in order to study the solar cell with complete architecture, conformed by glass/ITO/PEDOT:PSS-graphene-complex/BPhen/Ag. By incorporating the BPhen, the J–V curve current density values were increased, showing a conductivity change of as much as 2.1 × 10 −4 S/cm, and under illuminated conditions a more pronounced J–V curve variation (as much as 2.5 × 10 1 A/cm 2 ) was observed. In closing, the devices were subjected to accelerated lighting conditions to determine the stability and operating capacity of the solar cells. The electrical behavior of the devices changed. Within the first 2 h, the electrical behavior improved, where the organotin complex without a substituent (complex-a) device presents higher stability than the complex with the chloride substituent (complex-b) device due to the chloride radical interacting with the BPhen. However, the electrical behavior degraded after 4 h almost eight orders of magnitude in current density due to device films and interface degradation.

Polymer-Coated Graphene Films As Anti-Reflective Transparent Electrodes for Schottky Junction Solar Cells

Graphene-On-Silicon Schottky Junction Solar Cells

Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells

Single-layer graphene sheets as counter electrodes for fiber-shaped polymer solar cells

Hybrid thin films of graphene nanowhiskers and amorphous carbon as transparent conductors.

Enhanced Transparent Conductive Properties of Graphene/Carbon Nano-Composite Films

Rational Design of Hybrid Graphene Films for High-Performance Transparent Electrodes

Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells

Schottky Solar Cells Based On Graphene And Silicon

Graphene Nano-“patches” on a Carbon Nanotube Network for Highly Transparent/Conductive Thin Film Applications

Transparent Conductive Graphene Films Synthesized by Ambient Pressure Chemical Vapor Deposition Used As the Front Electrode of CdTe Solar Cells

Semitransparent Organic Solar Cells With Hybrid Monolayer Graphene/Metal Grid As Top Electrodes

Organic solar cells with solution-processed graphene transparent electrodes

Porous Organic Polymer Films with Tunable Work Functions and Selective Hole and Electron Flows for Energy Conversions

Graphene/Semiconductor Heterojunction Solar Cells with Modulated Antireflection and Graphene Work Function

A novel carbon nanotube/polymer composite film for counter electrodes of dye-sensitized solar cells

Solution-processed Composite Electrodes Composed of Silver Nanowires and Aluminum-Doped Zinc Oxide Nanoparticles for Thin-Film Solar Cells Applications

Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes

Graphene films decorated with metal sulfide nanoparticles for use as counter electrodes of dye-sensitized solar cells

Graphene-based transparent flexible electrodes for polymer solar cells

Improved Functionality of Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate)/HeptaCoordinated Organotin Complex Films via Graphene Applied to Organic Solar Cell Fabrications