Abstract:Enhanced transparency, conductivity, and stability are some of the most important factors to consider in order to prepare transparent electrodes (TEs) and hole transport layer (HTL) for organic solar cells. In this study, the transparency, optical, and electrical behavior of hybrid films formed by poly(3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and heptacoordinated organotin (IV) complexes was improved by introducing graphene. The films were deposited by spin-coating and subsequently characterized by infrared and Raman spectroscopy, and by scanning electron microscopy (SEM) and atomic force microscopy (AFM). All the hybrid films transmitted more than 70% of light in the 600–1,000 nm wavelength region, and the optical band gap obtained is in the range of 2.64 and 3.09 eV. In addition, bathophenanthroline (BPhen) was introduced as an electron transport layer (ETL) in order to study the solar cell with complete architecture, conformed by glass/ITO/PEDOT:PSS-graphene-complex/BPhen/Ag. By incorporating the BPhen, the J–V curve current density values were increased, showing a conductivity change of as much as 2.1 × 10 −4 S/cm, and under illuminated conditions a more pronounced J–V curve variation (as much as 2.5 × 10 1 A/cm 2 ) was observed. In closing, the devices were subjected to accelerated lighting conditions to determine the stability and operating capacity of the solar cells. The electrical behavior of the devices changed. Within the first 2 h, the electrical behavior improved, where the organotin complex without a substituent (complex-a) device presents higher stability than the complex with the chloride substituent (complex-b) device due to the chloride radical interacting with the BPhen. However, the electrical behavior degraded after 4 h almost eight orders of magnitude in current density due to device films and interface degradation.

Transparent Conductive Graphene Films Synthesized by Ambient Pressure Chemical Vapor Deposition Used As the Front Electrode of CdTe Solar Cells

Large-scale preparation of highly conductive three dimensional graphene and its applications in CdTe solar cells

Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells

Novel Cu Nanowires/Graphene As the Back Contact for Cdte Solar Cells

Epitaxial CdTe Thin Films on Mica by Vapor Transport Deposition for Flexible Solar Cells

Fully Transparent Quantum Dot Light-Emitting Diode with a Laminated Top Graphene Anode

Enhanced Transparent Conductive Properties of Graphene/Carbon Nano-Composite Films

Cold Wall CVD Graphene-Based Transparent Electrode for Solar Cells

Graphene on Metal Grids as the Transparent Conductive Material for Dye Sensitized Solar Cell

Organic solar cells with solution-processed graphene transparent electrodes

Graphene Transparent Electrodes Grown by Rapid Chemical Vapor Deposition with Ultrathin Indium Tin Oxide Contact Layers for Gan Light Emitting Diodes

Graphene as non conventional transparent conductive electrode in silicon heterojunction solar cells

Graphene Oxide Doped Single-Walled Carbon Nanotube Thin Film As Back Electrode for CdTe Solar Cell

Graphene Nano-“patches” on a Carbon Nanotube Network for Highly Transparent/Conductive Thin Film Applications

Efficient Semitransparent Perovskite Solar Cells with Graphene Electrodes

Improved Functionality of Poly(3,4-Ethylenedioxythiophene):Poly(Styrenesulfonate)/HeptaCoordinated Organotin Complex Films via Graphene Applied to Organic Solar Cell Fabrications

Ag Nanowire Films Coated with Graphene As Transparent Conductive Electrodes for Organic Light-Emitting Diodes

Chemical vapor deposition growth of few-layer graphene for transparent conductive films

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

CVD Growth of Large Area and Uniform Graphene on Tilted Copper Foil for High Performance Flexible Transparent Conductive Film

Coevaporated Cd1-xMgxTe Thin Films for CdTe Solar Cells