Abstract:The effect of a rotating magnetic field (RMF) on the distribution of Al 2 O 3 particles with an Al melt was studied by means of simulation and experiment. The results show that Al 2 O 3 particles (diameter of 1–10 μm, 1wt.%) are significantly agglomerated at the top of ingots when subjected to an RMF, and their distribution is influenced by both the intensity and the duration of RMF application. The optimal separation efficiency is achieved with the magnetic intensity of 12 mT for 120 s. The number of the particles at the bottom and the middle decreases by 64.5% and 69.7%, respectively, while that at the top increases by 242.5% compared to the condition without an RMF. However, if further increase the intensity or the duration of RMF, it can induce turbulent flows that draw some of the separated Al 2 O 3 particles back into the melt, reducing separation efficiency. The calculation results show that as the magnetic intensity increases from 6 mT to 18 mT, the velocity difference between the particles and the Al melt flow quadruples, increasing from 0.013 m·s −1 to 0.066 m·s −1 . Driven by this velocity difference, centrifugal motion, and secondary circulation, Al 2 O 3 particles tend to migrate upwards within the melt, facilitating the separation of impurity particles and enhancing the purity of the melt.

Removal Of Inclusions From Aluminum Melt Using Alternating Combined Magnetic Field

Effect of combined magnetic field on the eliminating inclusions from liquid aluminum alloy

Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt

Removing Inclusions from Molten Aluminum Alloy by Rotating Magnetic Field

Separating Effect of a Novel Combined Magnetic Field on Inclusions in Molten Aluminum Alloy

Separation of inclusions from aluminum melt using alternating electromagnetic field

Continuous Removal of Nonmetallic Inclusions from Aluminum Melts by Means of Stationary Electromagnetic Field and DC Current

Application of High Frequency Magnetic Field to Separate Inclusion Particles in Aluminum Melt

Modeling and Experiments on Electromagnetic Separation of Inclusions from Aluminum Melt under Combined Magnetic Field

Study of Electromagnetic Separation of Nometallic Inclusions from Aluminum Melt

Continuous Separation of Non-Metallic Inclusions from Aluminum Melt Using Alternating Magnetic Field

Separation of Inclusion Particles in Hollow-Cylinder Like Melt Using Alternating Electromagnetic Field

Use of Driven Flow Caused by Traveling Magnetic Field to Eliminate Inclusions from Liquid Aluminum Alloy

Inclusions removal from aluminum melt in electromagnetic field

Theoretical and Experimental Investigation of Aluminum Melt Cleaning Using Alternating Electromagnetic Field

Theoretical Study on Separation of Nonmetallic Inclusion Particles from a Hollow Cylindrical Melt in Alternating Electromagnetic Field

Movement behavior and separation of Al2O3 from Al melt under rotating magnetic field

Enhancement of removing inclusions from liquid melt film during the ESR process assisted by a static magnetic field

Continuous Separation of Inclusions from Aluminum Melt Flowing in A Circular Pipe Using A High Frequency Magnetic Field

Separation of Non-Metallic Inclusions from High Strength Low Alloy Steel by Electromagnetic Stirring

Mechanism of Removing Inclusions from Molten Aluminum by Stirring Active Molten Flux