Abstract:<p>In this work, the influence of 10 T high magnetic field on the liquid-liquid phase separation behavior of Cu-33.33 at.%Co immiscible alloy was systematically investigated. The results show that the separation behavior was significantly altered via the application of a high magnetic field. Both the Co-rich phase and the non-ferromagnetic Cu-rich phase are found to be elongated along the magnetic field direction due to the action of static magnetic energy and the coordinating of deformation. The relatively homogeneous microstructure of uniform dispersion of Co-rich phase on the matrix is obtained in the direction perpendicular to the magnetic field. The drag force induced by the thermoelectric magnetic convection under a high magnetic field hinders the solute transport of Co-rich phase, leading to a decline in the number of Cu-rich phase produced by the secondary decomposition. Moreover, the applied high magnetic field results in the variations of the undercooling during rapid solidification. The finally solidified Cu–Co alloy in a magnetic field of 10 T with higher undercooling exhibited a slightly lower saturation magnetization and higher coercivity and residual magnetizations. The present research provides new insights into the influence of high magnetic field on the liquid-liquid phase separation behavior of immiscible alloys.</p>

Effect of combined magnetic field on the eliminating inclusions from liquid aluminum alloy

Removing Inclusions from Molten Aluminum Alloy by Rotating Magnetic Field

Separating Effect of a Novel Combined Magnetic Field on Inclusions in Molten Aluminum Alloy

Removal Of Inclusions From Aluminum Melt Using Alternating Combined Magnetic Field

Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt

Modeling and Experiments on Electromagnetic Separation of Inclusions from Aluminum Melt under Combined Magnetic Field

Use of Driven Flow Caused by Traveling Magnetic Field to Eliminate Inclusions from Liquid Aluminum Alloy

Movement behavior and separation of Al2O3 from Al melt under rotating magnetic field

Enhancement of removing inclusions from liquid melt film during the ESR process assisted by a static magnetic field

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

An experimental instrument for solidification and in situ characterization of the nucleation behavior of high-melting metal under a high magnetic field

EBSD Study of the Influence of a High Magnetic Field on the Microstructure and Orientation of the Al-Si Eutectic During Directional Solidification

Effect of an Electromagnetic Field on Precipitates in the Composite Interface of Al-Mg/Al-Si

Influence of high magnetic field on the liquid-liquid phase separation behavior of an undercooled Cu–Co immiscible alloy

A study of electromagnetic characteristics of Fe-Si-Al magnetic alloy

Separation of Non-Metallic Inclusions from High Strength Low Alloy Steel by Electromagnetic Stirring

Microstructure of in Situ Synthesized Al3ti/6063 under Combination of Magnetic Fields

Magnetic field treatment effects on microstructure and properties of A356 aluminium alloy

Effect of Electromagnetic Vibration on the Agglomeration Behavior of Primary Silicon in Hypereutectic Al-Si Alloy

Numerical Study on Solidification Characteristics under Pulsed Magnetic Field

Effects of longitudinal magnetic field on primary dendrite spacing and segregation of directionally solidified single crystal superalloy