Abstract:With the development of modern power systems, the overvoltage protection and high current fast bypass of important electric equipment or parts in EHV grids put forward a great demand for high reliable fast bypass techniques. The triggered spark gaps now used in H. V. grids are still confronted with many difficulties. This paper proposes a conceptual design of a new multi-gap spark switch connected with a frequency-dependent network. The device is composed of series gaps and a chain RC network for producing frequency-dependent voltage distribution along the gaps. An even voltage distribution under power frequency operating voltage while an extremely uneven voltage distribution under trigger impulse can be achieved by proper parameter setting. The even voltage distribution enables the multi-gap spark switch to withstand much higher voltage than that in operation, thus avoiding false firing. On the contrary, extremely uneven voltage distribution could initiate cascade discharge at low amplitude impulse, insuring reliable triggering. The working principle of the new multi-gap spark switch differs considerably from that of the current spark gaps in H. V. and pulsed power systems. It has high reliability and no dead zone of trigger control, which can be sufficiently used as a high speed bypass switch for overvoltage protection applications in EHV grids. The conceptual design of the multi-spark gap switch, simulation of the frequency-dependent voltage distribution, cascade discharge of the spark gaps as well as the experimental performance verification on the prototype are presented in this paper.

Novel Passive Fault Current Limiter for EHV Grid Based on High Reliability Controllable Multi-stage Spark Gap

A Calculation Method Of Analytical Dc Fault Current In Mmc-Hvdc Grid Including Current-Limiting Devices

Design and Research of a Novel Unified Power Flow Controller with Fault Current Limiter

Research of fault-current limiter for three-phase four-wire power system

A Novel Six-Leg Three-Phase Fault Current Limiter

Experimental Study on the Solid-state Fault Current Limiter with Bypass Inductance

Saturated-core fault current limiters for AC power systems: Towards reliable, economical and better performance application

Short Circuit Current Limiter in As Network

A Modified DC Fault Protection Scheme for Multi-Terminal HVDC Grid Based on Fault Current Limiters

Simulation Study of Series Resonance Type Fault Current Limiter

A New Type of Controllable Multi-Spark Gap with High Reliability Applied in High Voltage Grid

Hybrid Multifunctional Saturated-core Fault Current Limiter

A New Multi-Gap Spark Switch Connected with Frequency-Dependent Network for Ehv Overvoltage Protection Applications

Fault Detection System for 500 kV AC Fault Current Limiter Based on High-Coupled Split Reactor

Simulation Study of New Solid-State Fault Current Limiter

Research on a Novel Bridge-Type Fault Current Limiter and Its Control Strategy

Design Consideration of a Dual-Functional Bridge-Type Fault Current Limiter

Flexible Fault Current Adaptation Features of A Novel DC Circuit Breaker Assisted by Superconducting Fault Current Limiters

A novel flexible fault eliminator with active disturbance rejection and soft grid-connection in distribution networks

A novel concept of fault current limiter based on saturable core in high voltage DC transmission system

A Dual-Stage Solid-State Fault-Current Limiter for Flexible DC Distribution Networks