Abstract:Ni-rich layered LiNi1-x-yCoxMnyO2 (NCM, x + y ≤ 0.2) is an intensively studied class of cathode active materials for lithium-ion batteries, offering the advantage of high specific capacities. However, their reactivity is also one of the major issues limiting the lifetime of the batteries. NCM degradation, in literature, is mostly explained both by disintegration of secondary particles (large anisotropic volume changes during lithiation/delithiation) and by formation of rock-salt like phases at the grain surfaces at high potential with related oxygen loss. Here, we report the presence of intragranular nanopores in Li1+x(Ni0.85Co0.1Mn0.05)1-xO2 (NCM851005) and track their morphological evolution from pristine to cycled material (200 and 500 cycles) using aberration-corrected scanning transmission electron microscopy (STEM), electron energy loss spectroscopy, energy dispersive X-ray spectroscopy, and time-of-flight secondary ion mass spectrometry. Pores are already found in the primary particles of pristine material. Any potential effect of TEM sample preparation on the formation of nanopores is ruled out by performing thickness series measurements on the lamellae produced by focused ion beam milling. The presence of nanopores in pristine NCM851005 is in sharp contrast to previously observed pore formation during electrochemical cycling or heating. The intragranular pores have a diameter in the range between 10 and 50 nm with a distinct morphology that changes during cycling operation. A rock-salt like region is observed at the pore boundaries even in pristine material, and these regions grow with prolonged cycling. It is suggested that the presence of nanopores strongly affects the degradation of high-Ni NCM, as the pore surfaces apparently increase (i) oxygen loss, (ii) formation of rock-salt regions, and (iii) strain-induced effects within the primary grains. High-resolution STEM demonstrates that nanopores are a source of intragranular cracking during cycling.

Study on the reversible capacity loss of layered oxide cathode during low-temperature operation

Impact of Low Temperature Exposure on Lithium-Ion Batteries: A Multi-Scale Study of Performance Degradation, Predictive Signals and Underlying Mechanisms

Revisiting the Initial Irreversible Capacity Loss of LiNi0.6Co0.2 Mn0.2O2 Cathode Material Batteries

Research on Electrochemical Properties and Fade Mechanisms of Li-Rich Cathode Materials at Low-Temperature

Degradation study for 18650 NMC batteries at low temperature

Unraveling the Capacity Fading Mechanisms of LiNi0.6Co0.2Mn0.2O2 at Elevated Temperatures

Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite-SiOx power batteries under high temperature and discharge cycling conditions

Degradation Mechanism of LiNi 0.5 Co 0.2 Mn 0.3 O 2 /Graphite Cells at Elevated State of Charge and High Temperature

Storage degradation mechanism of layered Ni-rich oxide cathode material LiNi0.8Co0.1Mn0.1O2

Insights into the effects of coating and single crystallization on the rate performance and cycle life of LiNi0.9Mn0.1O2 cathode

Abuse Tolerance Behavior Of Layered Oxide-Based Li-Ion Battery During Overcharge And Over-Discharge

Influence of working temperature on the electrochemical characteristics of Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode materials for Li-ion batteries

Plasma assisted synthesis of LiNi0.6Co0.2Mn0.2O2 cathode materials with good cyclic stability at subzero temperatures

Influence of charge rate on the cycling degradation of LiFePO 4 /mesocarbon microbead batteries under low temperature

Structural and Thermal Stabilities of Layered Li(Ni1/3Co1/3Mn1/3)O2 Materials in 18650 High Power Batteries

Functional Passivation Interface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 toward Superior Lithium Storage

Unraveling the degradation mechanism of LiNi0.8Co0.1Mn0.1O2 at the high cut-off voltage for lithium ion batteries

The effect of Ni oxidation state on the crystal structure and electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material for highly reversible lithium storage

The Role of Intragranular Nanopores in Capacity Fade of Nickel-Rich Layered Li(Ni1- x- yCoxMny)O2 Cathode Materials

Insights into the Enhanced Cycling Stability of Cobalt-Free Single-Crystal Layered Oxide Cathodes at Elevated Voltage

Insight into the capacity decay mechanism of cycled LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes via in situ x-ray diffraction