Temperature Tunable Photonic Band Gap in Polyvinylidene Fluoride Inverse Opals

Jitan Yao,Jin Wang,Muwei Ji,Chuwen Lan,Wenmei Liu,Bo Li

DOI: https://doi.org/10.1039/c6ra24011a

IF: 4.036

2016-01-01

RSC Advances

Abstract:Inverse polyvinylidene fluoride (PVDF) opals with a temperature tunable photonic band gap (PBG) were fabricated by the sol–gel process using SiO2 opal templates.

What problem does this paper attempt to address?

Temperature-controlled transformation in fiber types of fluid-filled photonic crystal fibers and applications.

Yiping Wang,Xiaoling Tan,Wei Jin,Diqing Ying,Yeuk Lai Hoo,Shujing Liu

DOI: https://doi.org/10.1364/OL.35.000088

IF: 3.6

2010-01-01

Optics Letters

Abstract:We investigated experimentally and theoretically an invertible fiber-type transformation from a photonic bandgap fiber into a nonideal waveguide and then into an index-guiding photonic crystal fiber via the thermo-optic effect of the fluid filled in the air holes. Such a transformation could be used to develop an in-fiber optical switch/attenuator with a high-extinction ratio of more than 35 dB over an extremely broad wavelength range from 600 to 1700 nm via a small temperature adjustment. (C) 2009 Optical Society of America
Ferroelectric Inverse Opals with Electrically Tunable Photonic Band Gap

B Li,J Zhou,LT Li,XJ Wang,XH Liu,J Zi

DOI: https://doi.org/10.1063/1.1631737

IF: 4

2003-01-01

Applied Physics Letters

Abstract:We present a scheme for tuning the photonic band gap (PBG) by an external electric field in a ferroelectric inverse opal structure. The inverse opals, consisting of ferroelectric (Pb,La)(Zr,Ti)O3 (PLZT) ceramics, were synthesized by a sol–gel process. Optical reflection spectra show that the PBG of the PLZT inverse opals shifts continuously with the change in the applied electric field. As the photonic crystals (PCs) consist of the high-refractive-index constituent and possess an “all-solid” structure, it should supply a more reliable mode to tune the PBG by the electric field for the superprism effect in PCs. It should be of high interest in device applications.
Temperature Tunable Photonic Band Gap Crystals Based on Liquid-Infiltrated Inverse Opal Structure

Zhendong Liu,Jingjing Gao,Bo Li,Ji Zhou

DOI: https://doi.org/10.1016/j.optmat.2012.11.013

IF: 3.754

2013-01-01

Optical Materials

Abstract:Temperature tunable photonic crystals were fabricated based on liquid-infiltrated inverse opal films. The photonic band gaps were investigated at different temperatures by reflection spectra. The results show that the photonic band gap can be tuned continuously by temperature change. In this work, the band gap was blue-shifted from 558 nm to 542 nm with increasing temperature from 28 °C to 48 °C. It will provide a new method of studying the modulation near edge effect of the photonic band gap.
Temperature Tunable Photonic Bandgap in PLZT Inverse Opals

Bo Li,Ji Zhou,Ruilong Zong,Ming Fu,Longtu Li

DOI: https://doi.org/10.1007/s10832-007-9262-8

2007-01-01

Journal of Electroceramics

Abstract:Three-dimensional periodic microstructure of air spheres in (Pb,La)(Zr,Ti)O 3 (PLZT) matrix were synthesized by sol–gel process using synthetic opals as template. The micro-region optical reflection spectra of PLZT inverse opal photonic crystals have been on-line measured continuously with treating temperature increasing. It demonstrates that the bandgap blue-shifts with treating temperature increasing based on the diminishment of periodical size in sintering process. The tunable band gap in PLZT inverse opals should be of high interest in device application.
Photoluminescence Properties of Sio2:Tb3+ Inverse Opal with Tunable Photonic Band Gap

Zhendong Liu,Bo Li,Ji Zhou

DOI: https://doi.org/10.4028/www.scientific.net/amm.320.155

2013-01-01

Applied Mechanics and Materials

Abstract:Temperature tunable photonic crystals were fabricated based on liquid-infiltrated inverse opal films which were prepared by Tb3+ doped SiO2 with a sol-gel method. The photoluminescence was investigated with the photonic band gap shift tuned by temperature. The results show that obvious suppression of spontaneous emission occurs when the photonic band gap overlaps with the Tb3+ emission band, while enhancement of the emission is observed if the emission band shifts at the edge of the band gap.
Ternary Inverse Opal System for Convenient and Reversible Photonic Bandgap Tuning

Zhan-Fang Liu,Tao Ding,Guo Zhang,Kai Song,Koen Clays,Chen-Ho Tung

DOI: https://doi.org/10.1021/la801137p

IF: 3.9

2008-01-01

Langmuir

Abstract:A ternary system, consisting of air, an air-core/dense-silica-shell core-shell particle, and liquids has been used to fabricate an inverse opal structure with low fill factor, high refractive index contrast, and reversible tuning capabilities of the bandgap spectral position. The original close-packed opal structure is a ternary self-assembled photonic crystal from monodisperse and spherical polystyrene-core/silica-shell colloidal particles with air as the void material. Calcination removed the polystyrene and converted the core-shell particles to hollow spheres with a dense shell. In a final step, liquid is infiltrated only in the voids between the hollow spheres, but does not penetrate in the shell. This allows facile and reversible tuning of the bandgap, properties in an inverse opal structure.
Photonic Bandgap Tuning With Thermo-Optic Effect

T Chu,H Yamada,S Ishida,Y Arakawa

DOI: https://doi.org/10.1109/LEOS.2004.1363488

2004-01-01

Abstract:Tuning of photonic bandgap was demonstrated with thermo-optic effect. A 2.7-nm wavelength-shift was obtained at 48 mW heating power. Optic switching by shifting photonic bandgap was realized with an extinction ratio of 13 dB.
Liquid-Crystal Photonic-Band-Gap Materials: The Tunable Electromagnetic Vacuum

Kurt Busch,Sajeev John

DOI: https://doi.org/10.1103/physrevlett.83.967

IF: 8.6

1999-08-02

Physical Review Letters

Abstract:We demonstrate that when an optically birefringent nematic liquid crystal is infiltrated into the void regions of an inverse opal, photonic-band-gap (PBG) material, the resulting composite material exhibits a completely tunable PBG. In particular, the three-dimensional PBG can be completely opened or closed by applying an electric field which rotates the axis of the nematic molecules relative to the inverse opal backbone. Tunable light localization effects may be realized by controlling the orientational disorder in the nematic.

physics, multidisciplinary
Transmission Bandwidth Tunability of a Liquid-Filled Photonic Bandgap Fiber

Zou Bing,Liu Yan-Ge,Du Jiang-Bing,Wang Zhi,Han Ting-Ting,Xu Jian-Bo,Li Yuan,Liu Bo

DOI: https://doi.org/10.1088/0256-307x/26/4/044210

2009-01-01

Abstract:A temperature tunable photonic bandgap fiber (PBGF) is demonstrated by an index-guiding photonic crystal fiber filled with high-index liquid. The temperature tunable characteristics of the fiber are experimentally and numerically investigated. Compression of transmission bandwidth of the PBGF is demonstrated by changing the temperature of part of the fiber. The tunable transmission bandwidth with a range of 250 nm is achieved by changing the temperature from 30°C to 90°C.
Thermoresponsive Inverse Opal Films Fabricated with Liquid-Crystal Elastomers and Nematic Liquid Crystals

Guanglong Wu,Yin Jiang,Dan Xu,Hong Tang,Xiao Liang,Guangtao Li

DOI: https://doi.org/10.1021/la1037124

IF: 3.9

2010-01-01

Langmuir

Abstract:Liquid-crystal elastomers together with nematic liquid crystals have been used as inverse opal materials to fabricate thermoresponsive photonic crystal directly. In the vicinity of the phase-transition point of the mixture, the photonic band gaps of such inverse opal films exhibited a strong temperature dependence. As the molar ratio of liquid-crystal elastomers and nematic liquid crystals changed, the character of their PBGs also changed with increasing temperature. Such a temperature-tuning effect in the photonic band gap should be of great interest in thermal switches and thermal sensors.
Analysis of the shrinkage process of inverse opals by shift of photonic bandgap position

Bo Li,Ji Zhou,Longtu Li

2004-01-01

Abstract:We present a scheme for analysis the relationship between the shift of photonic bandgap (PBG) position, and the heat-treated temperature in sintering process. The experimental results indicate that PLZT inverse opals is densified in the range of 900-1000°C combined with the distinct shrinkage, a remarkable blue-shift of the reflection peaks in the spectra is obtained through real-time spectral measurements. This method can be applied in the exact analysis of the heat-expanded properties of the PBG materials.
A Thermally Tunable Inverse Opal Photonic Crystal for Monitoring Glass Transition.

Liguo Sun,Zhuoying Xie,Hua Xu,Ming Xu,Guozhi Han,Cheng Wang,Xuduo Bai,ZhongZe Gu

DOI: https://doi.org/10.1166/jnn.2012.5672

2012-01-01

Journal of Nanoscience and Nanotechnology

Abstract:An optical method was developed to monitor the glass transition of the polymer by taking advantage of reflection spectrum change of the thermally tunable inverse opal photonic crystal. The thermally tunable photonic bands of the polymer inverse opal photonic crystal were traceable to the segmental motion of macromolecules, and the segmental motion was temperature dependent. By observing the reflection spectrum change of the polystyrene inverse opal photonic crystal during thermal treatment, the glass transition temperature of polystyrene was gotten. Both changes of the position and intensity of the reflection peak were observed during the glass transition process of the polystyrene inverse opal photonic crystal. The optical change of inverse opal photonic crystal was so large that the glass transition temperature could even be estimated by naked eyes. The glass transition temperature derived from this method was consistent with the values measured by differential scanning calorimeter.
Thermal Tunability of Photonic Bandgaps in Liquid Crystal Infiltrated Microstructured Polymer Optical Fibers.

Wu Yuan,Lei Wei,Thomas Tanggaard Alkeskjold,Anders Bjarklev,Ole Bang

DOI: https://doi.org/10.1364/oe.17.019356

IF: 3.8

2009-01-01

Optics Express

Abstract:We demonstrate the photonic bandgap effect and the thermal tunability of bandgaps in microstructured polymer optical fibers infiltrated with liquid crystal. Two liquid crystals with opposite sign of the temperature gradient of the ordinary refractive index (E7 and MDA-00-1444) are used to demonstrate that both signs of the thermal tunability of the bandgaps are possible. The useful bandgaps are ultimately bounded to the visible range by the transparency window of the polymer.
Treating Temperature Effect on Bandgap in Polymer Opal Photonic Crystals

Li Bo,Zhou Ji,Hu Wei,Li Longtu,Gui Zhilun

DOI: https://doi.org/10.1360/02tb9215

2002-01-01

Abstract:The optical reflective spectra and microstructures of polystyrene opal photonic crystals treated with different temperatures have been investigated. With temperature increasing, the polystyrene spheres in opal structure transform to dodecahedrons, and the peak of reflective spectrum moves to shorter wavelength. The experiment result testifies the effect of the effective refractive index and the filling ratio to the bandgap position, and it corresponds to the theoretical simulative result.
Photonic Band Gap In (Pb,La)(Zr,Ti)O-3 Inverse Opals

Bo Li,Ji Zhou,Lifeng Hao,Wei Hu,Ruilong Zong,Minmin Cai,Min Fu,Zhilun Gui,Longtu Li,Qi Li

DOI: https://doi.org/10.1063/1.1578691

IF: 4

2003-01-01

Applied Physics Letters

Abstract:(Pb, La)(Zr, Ti)O-3 (PLZT) inverse opal photonic crystals were synthesized by a process of self-assembly in combination with a sol-gel technique. In this process, PLZT precursors were infiltrated into the interstices of the opal template assembled by monodisperse submicron polystyrene spheres, and then gelled in a humid environment. Polystyrene template was removed by calcining the specimen at a final temperature of 700degreesC accompanied with the crystallization of perovskite phase in PLZT inverse opal network. Scanning electron microscope images show that the inverse opals possess a fcc structure with a lattice constant of 250 nm. A wide photonic band gap in the visible range is observed from transmission spectra of the sample. Such PLZT inverse opals as photonic crystals should be of importance in device applications. (C) 2003 American Institute of Physics.
Thermally Tunable Dual-Core Photonic Bandgap Fiber Based on the Infusion of A Temperature-Responsive Liquid

Jiangbing Du,Yange Liu,Zhi Wang,Zhanyuan Liu,Bing Zou,Long Jin,Bo Liu,Guiyun Kai,Xiaoyi Dong

DOI: https://doi.org/10.1364/oe.16.004263

IF: 3.8

2008-01-01

Optics Express

Abstract:A dual-core photonic bandgap fiber ( PBGF) is demonstrated by infusing a high-index liquid into a dual-core air-silica photonic crystal fiber ( PCF). Extremal couplings have been experimentally observed. The temperature tunable characteristics of the dual-core PBGF's bandgap guiding and dual-core coupling are experimentally and numerically investigated. When we rise temperature, the dual-core PBGFs' bandgaps have been changed: compression of bandwidth, blue-shift and depression of the guiding band. Especially, the dual-core coupling is temperature tunable because of the tunability of the infusion liquid's index. We find that the rise of temperature increases the coupling length which results in the blue-shift of the resonant peak wavelengths with a speed of 1.9nm/degrees C, for a 20mm dual-core PBGF. (c) 2008 Optical Society of America.
Control of the Optical Properties of Liquid Crystal-Infiltrated Inverse Opal Structures Using Photo Irradiation And/or an Electric Field

S Kubo,ZZ Gu,K Takahashi,A Fujishima,H Segawa,O Sato

DOI: https://doi.org/10.1021/cm050249l

IF: 10.508

2005-01-01

Chemistry of Materials

Abstract:Tunable photonic band gap crystals were prepared by the infiltration of photoresponsive liquid crystals into inverse opal structure films. Tuning of their optical properties could be realized by means of photoinduced phase transition of liquid crystals. The photoinduced phase transition behavior could be evaluated by measuring the change in their optical properties under light irradiation, and it was clearly observed that the behavior varied with temperature and light intensity. The materials could store and display images that were created by the irradiation with UV light through a photomask. A great advantage of this technique is that the films themselves can display an image without the use of polarizers or other assistant materials, and they can also render a color display that can be selected by varying the lattice distance of the inverse opal structure. In addition, we achieved the control of their optical properties by the application of an electric field. Because the state induced by the electric field is different from that engendered by a photoinduced phase transition, it is now possible to switch among three states by a combination of these two techniques. The materials that we have developed have possibilities for practical applications in optical devices.
A Poly(4-Vinylpyridine)-based Inverse Opal.

Jian Liu,Guangtao Li,Zhen Wu,Qi An,Yong Qiu

DOI: https://doi.org/10.1002/cphc.200700031

IF: 3.52

2007-01-01

ChemPhysChem

Abstract:Back and forth: Poly(4-vinylpyridine)-based inverse opal structures are fabricated. These systems are suitable for developing durable photonic paper systems and can serve as a platform to create printed “photonic circuits” (see picture, left), molecular gating systems, and chemosensors. The novel inverse opals (see scanning electron microscopy image, top right) can be reversibly collapsed (see SEM image, bottom right) and regenerated by modifying the pyridine moieties of the polymer.
Solid Optical Fiber with Tunable Bandgaps Based on Curable Polymer Infiltrated Photonic Crystal Fiber

Bing Sun,Wei,Chao Wang,Changrui Liao,Jing Xu,Hongdan Wan,Lin Zhang,Zuxing Zhang,Yiping Wang

DOI: https://doi.org/10.1109/jlt.2016.2586584

IF: 4.7

2016-01-01

Journal of Lightwave Technology

Abstract:We demonstrated the realization and characterization of a solid photonic bandgap fiber (SPBF) with a compact size of about 10 mm and a high wavelength sensitivity of up to -4.034 nm/degrees C by means of fully infiltrating an ultraviolet curable polymer with a high refractive index of 1.515 into air holes of a photonic crystal fiber (PCF). To the best of our knowledge, it was the first time that the SPBF with tunable bandgaps was fabricated in the conventional index-guiding PCF. Compared with conventional fluid filled PBFs, the proposed SPBF can be stable to temperature and other environmental effects and maintain a large extinction ratio of more than 30 dB within a broad wavelength. The splicing between the SPBF and single mode fibers has been solved. Moreover, it is observed that the bandwidth of bandgap (G2) gradually broadens with the increase in temperature.
Control of the Optical Band Structure of Liquid Crystal Infiltrated Inverse Opal by A Photoinduced Nematic-Isotropic Phase Transition

S Kubo,ZZ Gu,K Takahashi,Y Ohko,O Sato,A Fujishima

DOI: https://doi.org/10.1021/ja026482r

IF: 15

2002-01-01

Journal of the American Chemical Society

Abstract:Recently, photonic band gap (PBG) crystals with lattice parameters comparable to the wavelength of light have attracted much attention, because they offer unique ways in which to control the propagation of light. PBG crystals have applications in laser, quantum optical devices, and so on. For many of these applications, it is important to have the capability of tuning the photonic band structures. The fabrication of such tunable PBG crystals is still a challenge. In this paper, we proposed that switchable PBG crystals could be realized by taking advantage of the phase transition in liquid crystals induced by the photoisomerization of azo dyes. A dynamic change in the optical stop band was demonstrated. Such photoswitchable PBG crystals provide a method by which light can be routed using light.

Temperature Tunable Photonic Band Gap in Polyvinylidene Fluoride Inverse Opals

Temperature-controlled transformation in fiber types of fluid-filled photonic crystal fibers and applications.

Ferroelectric Inverse Opals with Electrically Tunable Photonic Band Gap

Temperature Tunable Photonic Band Gap Crystals Based on Liquid-Infiltrated Inverse Opal Structure

Temperature Tunable Photonic Bandgap in PLZT Inverse Opals

Photoluminescence Properties of Sio2:Tb3+ Inverse Opal with Tunable Photonic Band Gap

Ternary Inverse Opal System for Convenient and Reversible Photonic Bandgap Tuning

Photonic Bandgap Tuning With Thermo-Optic Effect

Liquid-Crystal Photonic-Band-Gap Materials: The Tunable Electromagnetic Vacuum

Transmission Bandwidth Tunability of a Liquid-Filled Photonic Bandgap Fiber

Thermoresponsive Inverse Opal Films Fabricated with Liquid-Crystal Elastomers and Nematic Liquid Crystals

Analysis of the shrinkage process of inverse opals by shift of photonic bandgap position

A Thermally Tunable Inverse Opal Photonic Crystal for Monitoring Glass Transition.

Thermal Tunability of Photonic Bandgaps in Liquid Crystal Infiltrated Microstructured Polymer Optical Fibers.

Treating Temperature Effect on Bandgap in Polymer Opal Photonic Crystals

Photonic Band Gap In (Pb,La)(Zr,Ti)O-3 Inverse Opals

Thermally Tunable Dual-Core Photonic Bandgap Fiber Based on the Infusion of A Temperature-Responsive Liquid

Control of the Optical Properties of Liquid Crystal-Infiltrated Inverse Opal Structures Using Photo Irradiation And/or an Electric Field

A Poly(4-Vinylpyridine)-based Inverse Opal.

Solid Optical Fiber with Tunable Bandgaps Based on Curable Polymer Infiltrated Photonic Crystal Fiber

Control of the Optical Band Structure of Liquid Crystal Infiltrated Inverse Opal by A Photoinduced Nematic-Isotropic Phase Transition