Abstract:Reducing frictional losses in response to the energy agenda will require use of less viscous lubricants causing hydrodynamically-lubricated bearings to operate with thinner films leading to "mixed lubrication" conditions in which a degree of direct interaction occurs between surfaces protected only by boundary tribofilms. The paper considers the consequences of thinner films and mixed lubrication for concentrated contacts such as those occurring between the teeth of power transmission gears and in rolling element bearings. Surface fatigue in gears remains a serious problem in demanding applications, and its solution will become more pressing with the tendency towards thinner oils. The particular form of failure examined here is micropitting, which is identified as a fatigue phenomenon occurring at the scale of the surface roughness asperities. It has emerged recently as a systemic difficulty in the operation of large scale wind turbines where it occurs in both power transmission gears and their support bearings. Predictive physical modelling of these contacts requires a transient mixed lubrication analysis for conditions in which the predicted lubricant film thickness is of the same order or significantly less than the height of surface roughness features. Numerical solvers have therefore been developed which are able to deal with situations in which transient solid contacts occur between surface asperity features under realistic engineering conditions. Results of the analysis, which reveal the detailed time-varying behaviour of pressure and film clearance, have been used to predict fatigue and damage accumulation at the scale of surface asperity features with the aim of improving understanding of the micropitting phenomenon. The possible consequences on fatigue of residual stress fields resulting from plastic deformation of surface asperities is also considered.

Micro-elastohydrodynamic lubricant film formation in rotary lip seal contacts

A General Model for Microelastohydrodynamic Lubrication and Its Full Numerical Solution

Misalignment-Induced Micro-Elastohydrodynamic Lubrication in Rotary Lip Seals

A mixed soft elastohydrodynamic lubrication model of textures in a rotary lip seal

Elastohydrodynamic Lubrication of Soft, Highly Deformed Contacts

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

A Mixed Lubrication Theoretical Model and Experimental Verification of Rotary Lip Seals

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Computer model of mixed lubrication in point contacts

Lubrication Of Nonconformal Contacts

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

A Transient Model for Micro-Elastohydrodynamic Lubrication with Three-Dimensional Irregularities

A Mixed Lubrication Model for Lip Seals Based on Deterministic Surface Microdeformation

A mixed lubrication model of a rotary lip seal using flow factors

New Turbulent Lubrication Model in Hydrodynamic Face Seal

Soft lubrication: the elastohydrodynamics of non-conforming and conforming contacts

A Study of the Elastohydrodynamic Problem in Rectangular Elastomeric Seals

Mixed Lubrication Modeling of Multi-Lip Reciprocating Seals Based on Elastohydrodynamic Lubrication Theory

A multiscale wear simulation method for rotary lip seal under mixed lubricating conditions

Predictive modelling of fatigue failure in concentrated lubricated contacts