Abstract:Mobile edge computing (MEC) and millimeter wave (mmWave) communications are capable of significantly reducing the network's delay and enhancing its capacity. In this paper we investigate a mmWave and device-to-device (D2D) assisted MEC system, in which user A carries out some computational tasks and shares the results with user B with the aid of a base station (BS). We assume partial offloading model and the task can be partitioned into two portions: the first part is computed locally at user A, while the second part is transmitted to the BS and computed by the MEC server. The computational results are then sent to user B through a D2D link and via the link from the BS to user B, respectively. To support computation offloading, both the users and the BS are equipped with multiple antennas and employ analog and digital (A/D) hybrid beamforming. Moreover, we propose a novel two-timescale joint hybrid beamforming and task allocation algorithm to reduce the system latency whilst cut down the required signaling overhead. Specifically, the high-dimensional analog beamforming matrices are updated in a frame-based manner based on the channel state information (CSI) samples, where each frame consists of a number of time slots, while the low-dimensional digital beamforming matrices and the offloading ratio are optimized more frequently relied on the low-dimensional effective channel matrices in each time slot. A stochastic successive convex approximation (SSCA) based algorithm is developed to design the long-term analog beamforming matrices. As for the short-term variables, the digital beamforming matrices are optimized relying on the innovative penalty-concave convex procedure (penalty-CCCP) for handling the mmWave non-linear transmit power constraint, and the offloading ratio can be obtained via the derived closed-form solution. Simulation results verify the effectiveness of the proposed algorithm by comparing the benchmarks.

An Energy-efficient Adaptive Sub-THz Wireless Interconnect with MIMO-Beamforming between Cores and DRAMs

Latency Minimization for Mmwave D2D Mobile Edge Computing Systems: Joint Task Allocation and Hybrid Beamforming Design.

Energy Efficiency Optimization for Beamspace Massive MIMO Systems with Low-Resolution ADCs.

Energy Efficient Power Allocation Design for Beamspace MISO Non-Orthogonal Multiple Access Systems

Dynamic MIMO Architecture Design for Near-Field Communications

Energy-Efficient Power Allocation For Millimeter Wave Beamspace Mimo-Noma Systems

Energy efficient 5 Gb/s baseband transceiver for 3D memory interconnect

On-chip 3.2 Tb/s Wireless Optical Interconnects Using Diffraction-Free Beam and Microcomb

Low-power Low-Latency Optical Network Architecture for Memory Access Communication

Energy Efficient Analog Beamformer Design for Mmwave Multicast Transmission

Coordinated Fronthaul Data Assignment and Multicast Beamforming for Cache-Enabled Wireless Networks

Decentralized Energy-Efficient Coordinated Beamforming for Multicell Systems

Energy-Efficient Transceiver Design for Hybrid Sub-Array Architecture MIMO Systems

Parallel in-memory wireless computing

Energy Efficient Beamforming in Miso Heterogeneous Cellular Networks with Wireless Information and Power Transfer

A Unified Beamforming Structure for Wireless Multicasting and Power Transfer in MIMO Systems

Robust Beamforming Optimization Design for RIS-Aided MIMO Systems with Practical Phase Shift Model and Imperfect CSI

Multi-Beam Design for Near-Field Extremely Large-Scale RIS-Aided Wireless Communications

Energy Efficiency Maximization in Millimeter Wave Hybrid MIMO Systems for 5G and Beyond

Joint Hybrid and Passive RIS-Assisted Beamforming for MmWave MIMO Systems Relying on Dynamically Configured Subarrays