Abstract:The three welding modes of laser positioning, trajectory fitting and real-time tracking are key links for flexible robotic welding, because they directly affect the adaptability of welding robots for complex structural parts. Nevertheless, there are few studies on the integration of laser positioning, trajectory fitting and real-time tracking welding. Aiming at the drawback of that the robot cannot efficiently match the corresponding welding process between different working conditions such as short seam, spatial curve seam and long seam welding, a control scheme that can integrate the above three welding modes is proposed in this paper. First, the welding requirements of laser positioning, trajectory fitting and real-time tracking are transformed into a unified 3D coordinate recognition task for integrated welding, so the identification of welding points under three different processes can be obtained through an identical inference. The next, given the fast inference speed of YOLOv5, a joint ROI extraction algorithm with YOLOv5 as the core is applied. To compensate for YOLOv5′s inability to directly locate seam centers, iterative centerline unbiased detector (ICUD) and adaptive feature extraction algorithm (AFEA) are proposed without the need for complex image pre-processing and with very strong immunity to strong exposure and strong arc spatter. Finally, teaching trajectory correction model, B-spline curve fitting model, and 3D coordinate real-time tracking model are presented to enhance the adaptability of the welding robot and to flexibly match the appropriate welding mode in various working conditions. Experimental results indicate that the welding trajectory is basically consistent with the seam centerline when laser positioning and trajectory fitting welding. In real-time tracking welding, the real-time deviation is mainly controlled within the range of ± 0.2 mm, and the average error is 0.1160 mm.

Space Curved Fillet Weld Joints Tracking by Robots Based on Rotational Arc Sensors in Gas Metal Arc Welding

Circular Fillet Weld Tracking in Gmaw by Robots Based on Rotating Arc Sensors

Rectangular Fillet Weld Tracking by Robots Based on Rotating Arc Sensors in Gas Metal Arc Welding

Realization of Rectangular Fillet Weld Tracking Based on Rotating Arc Sensors and Analysis of Experimental Results in Gas Metal Arc Welding

Right-angle Fillet Weld Tracking by Robots Based on Rotating Arc Sensors in GMAW

Track Control in Automated Welding of Saddle Curve

Mobile Welding Robot System Applied for a Right-angle Fillet Welding in Narrow Space

Identification of the Space Posture of Arc Welding Guns with Rotational Arc Sensors in GMAW

Mobile Welding Robot System Based on Rotating Arc Sensor Applied for Large Fillet Welding Seam Tracking.

Feature extraction and tracking of a weld joint for adaptive robotic welding

A Novel Seam Tracking Technique with a Four-Step Method and Experimental Investigation of Robotic Welding Oriented to Complex Welding Seam

Measurement and Trace Generation of a Friction Stir Welding Robot for Space Weld Joint on Large Thin-Walled Parts

A Novel 3D Complex Welding Seam Tracking Method in Symmetrical Robotic MAG Welding Process Using a Laser Vision Sensing

Ripple Line Fillet Seams Tracking Control of a Mobile Robot for Container Welding

A Feature Matching Algorithm Applied to Welding Trajectory Revising

Seam tracking for space position based on rotating arc sensor

Versatile robotic welding system integrating laser positioning, trajectory fitting and real-time tracking

Research on 3D curved weld seam trajectory position and orientation detection method

Computer aided weld seam tracking approach

Predictive Fuzzy Control for a Mobile Welding Robot Seam Tracking

The System Design Of An Autonomous Mobile Welding Robot