Abstract:Cu2SnS3 (CTS), a typical ternary copper-based sulfide, is considered as a potential p-type thermoelectric (TE) material with the advantages of environmental friendliness and low cost, but its performance is limited by the high lattice thermal conductivity and electrical resistivity. Herein, we have successfully synthesized undoped and In-doped CTS nanoparticles with a pure tetragonal phase by the colloidal method. More interestingly, plenty of twin boundaries appear in all the samples sintered from the synthesized nanoparticles independent of composition. The twin boundaries can effectively reduce the lattice thermal conductivity, while the tetragonal phase is beneficial to meliorate the electrical performance of CTS. Consequently, the highest zT reaches 0.36 at 700 K for Cu2Sn0.85In0.15S3, which is enhanced by 17 times compared to that of the pristine CTS with mainly the monoclinic phase. The tunable phase and microstructure via the colloidal method provide useful guidance to promote the performance of eco-friendly TE sulfides.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01483.Lattice thermal conductivity (κl) calculation; observed, calculated, and difference Rietveld refined XRD patterns for Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples; SEM images under different magnifications of the Cu2Sn0.85In0.15S3-sintered sample; temperature dependence of electrical conductivity, Seebeck coefficient, PF of Cu2Sn0.85In0.15S3 ("brm" stands for before reversible measurement, "arm" stands for after reversible measurement); XRD patterns of Cu2Sn0.85In0.15S3; calculated band structures of In-doped t-CTS (Cu2Sn0.75In0.25S3); low-magnification TEM image, HRTEM image of Cu2SnS3; structural data (position, occupancies, Biso, and bond distances) of m-CTS, t-CTS, and c-CTS; and carrier concentration of Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples (PDF)This article has not yet been cited by other publications.

Eco-friendly P-Type Cu2SnS3 Thermoelectric Material: Crystal Structure and Transport Properties

Enhanced Thermoelectric Properties of Earth-Abundant Cu2sns3 Via in Doping Effect

High Thermoelectric Performance in Cu2SnS3 by Control Over Phase‐Dependent Mobility Edge

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu 2 SnS 3

High Thermoelectric Figure of Merit ZT > 1 in SnS Polycrystals

The Enhanced Electrical Transport Properties of Fe3+ Doped Cu2SnS3

Approaching high thermoelectric performance in p-type Cu3SbS4-based materials by rational electronic and nano/microstructural engineering

Toward Ultrahigh Thermoelectric Performance of Cu2SnS3‐Based Materials by Analog Alloying

Enhanced Thermoelectric Performance of Cu2SnSe3 by Synergic Effects Via Cobalt-Doping

Magnetic Iron Doping in Cu2SnS3 Ceramics for Enhanced Thermoelectric Transport Properties

Thermoelectric Properties Of Sn-Doped P-Type Cu3sbse4: A Compound With Large Effective Mass And Small Band Gap

Thermoelectric Performance Enhancement in SnS Polycrystals Owing to Hole Doping Combined with Textured Microstructures

Dense twin and domain boundaries lead to high thermoelectric performance in Sn-doped Cu 3 SbS 4

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

Synergistic Role of Ni-doping in Electrical and Phonon Transport Properties of Cu2Sn1-xNixS3

Enhanced Thermoelectric Performance in Polymorphic Heavily Co-doped Cu2SnS3 Through Carrier Compensation by Sb Substitution

Cobalt-doping in Cu2SnS3: Enhanced Thermoelectric Performance by Synergy of Phase Transition and Band Structure Modification

The thermoelectric properties of Cu2S are enhanced by doping tin with hydrothermal method

Realizing high-ranged thermoelectric performance in PbSnS2 crystals

High Thermoelectric Performance of Co-doped Cu2SnS3-attapulgite Nano-Composites Achieved by Synergetic Manipulation of Electrical and Thermal Transport Properties

Carrier-filtering and phonon-blocking AgSnSe2-decorated grain boundaries to boost the thermoelectric performance of Cu2Sn0.9Co0.1S3