Size impact of cerium oxide nanoparticles (CeO2) on ternary fuel blend using third-generation biodiesel in VCR diesel engine
Nikunj Upadhyay,Randip Kumar Das,Subrata Kumar Ghosh
DOI: https://doi.org/10.1007/s10973-024-12958-3
IF: 4.755
2024-03-09
Journal of Thermal Analysis and Calorimetry
Abstract:An experiment was conducted to examine the impact of blending third-generation biodiesel waste cooking biodiesel (WCO biodiesel) and Azolla pinnata microalgae biodiesel (APO biodiesel) with cerium oxide nanoparticles (CeO 2 NPs) at 40 ppm concentration, encompassing sizes of 20, 50, and 100 nm. These biodiesels were generated via methanol-KOH trans-esterification. The investigation was carried out on a Kirloskar TV1 single-cylinder four-stroke variable compression ratio (VCR) diesel engine across load variations (0–100%) and compression ratios (i.e., CRs 16, 17, and 18) at a consistent 1500 rpm engine speed. Among various test fuel blends, D80W10A10CNP50 (Diesel 80% + WCO 10% + APO 10% + 40 ppm CeO 2 50 nm) yielded optimized results across all conditions. Incorporating CeO 2 NPs boosted brake thermal efficiency (BTE) by reducing brake-specific energy consumption (BSEC), and it facilitated efficient combustion as a catalyst, leading to decreased emissions. NP size notably influenced these enhancements. Specifically, employing 50 nm NPs yielded optimal performance parameters and reduced exhaust emissions across all CRs. At CR-17, as compared to additive-free D80W10A10, the fuel formulation, including 50 nm NPs, resulted in an 11.1% BTE increase and a 6.03% BSEC decrease. Also, emission parameters revealed that carbon monoxide (CO), unburnt hydrocarbons (UBHC), nitrogen oxides (NO X ), and smoke opacity decreased by 30.76%, 25.44%, 9.12%, and 13.64%, respectively, while carbon dioxide (CO 2 ) emissions increased by 10.09%. These results may help elucidate the chemical mechanism of action of NPs and open the way for developing a more effective fuel additive.
chemistry, physical, analytical,thermodynamics