Abstract:In ceramic materials the boundaries between grains have a profound effect on many mechanical, chemical, and electrical properties, such as fracture strength, high-temperature creep, diffusion and electric conductivity, etc. However, their characterization has not been clarified yet because they are liable to be affected by the concentration or the precipitation of impurities at the grain boundaries. In general, the structures and properties of grain boundaries depend on the adjacent two crystals consisting of boundaries, and it is clear in metals that grain boundaries can be regarded as the region where atomic arrangement is disordered compared to that of the lattice in the grains. Therefore, atoms in the boundary region may relax their positions to minimize the total energy.1–3 Models for tilt boundaries have been proposed by Read-Shockley,4 R.W. Balluffi et al.,3 and many others. The structure of low-angle tilt boundaries has been confirmed to be an array of edge dislocations. The structure of high-angle tilt boundaries, because of the dislocation core overlapping, cannot be explained by the dislocation arrays. In the case of twist boundaries energy minima existing in the boundaries can be interpreted in terms of the coincidence site lattice (CSL) theory.5–9 Hitherto, for most studies on grain boundaries, polycrystalline materials or two pieces (bicrystals) cut from their blocks have often been used as specimens.

On The Small Angle Twist Sub-Grain Boundaries In Ti3alc2

Features of a nano-twist phase in the nanolayered Ti3AlC2 MAX phase

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

Atomistic simulation on the transformation behaviour of structural units at Σ27 tilt grain boundary

Molecular Dynamical Investigation on Plastic Behavior of Cu(100) Twist-Grain Boundary under Uniaxial Tension

Transformation of Coherent Twin Boundary into Basal-Prismatic Boundary in HCP-Ti: A Molecular Dynamics Study

Phase transformation generating coherent twin boundaries in titanium alloys

Grain Boundary Energy of Twisted MgO Bicrystals on (100)

Molecular dynamics simulation of grain boundary geometry on crack propagation of bi-crystal aluminum

Concentration-Dependent High-Temperature Deformation Mechanism of Hexagonal Close-Packed Ti-Al Alloys

Influence of grain boundary and twin boundary on the stretching deformation behaviors of Cu/Ta interface material

Transmission Electron-Microscopy Study of Small-Angle Grain-Boundaries, Dislocations and Modulated Phases in Al-Li-Cu Quasi-Crystals

Structure and stability of Σ3 grain boundaries in face centered cubic metals

Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy

Atomic force microscopy and transmission electron microscopy identification of deformation twinning in the Cr2AlC MAX phase

Atomic structure of high-index α2:γm boundaries in a Ti–46.54 at.%Al alloy

Tensile deformation behavior of twist grain boundaries in CoCrFeMnNi high entropy alloy bicrystals

The Plastic Deformation Mechanisms of hcp Single Crystals with Different Orientations: Molecular Dynamics Simulations

Shock-induced Migration of Σ3〈110〉 Grain Boundaries in Cu