Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-Capacity Rechargeable $Li/Cl_2$ Batteries with Graphite Positive Electrodes

High-Capacity Rechargeable Li/Cl2 Batteries with Graphite Positive Electrodes

Shedding Light on Rechargeable Na/Cl$_2$ Battery

Rechargeable Na/Cl2 and Li/Cl2 batteries

Cl− Doping Strategy to Boost the Lithium Storage Performance of Lithium Titanium Phosphate

Ultrahigh-Rate Na/Cl2 Batteries Through Improved Electron and Ion Transport by Heteroatom-Doped Bicontinuous-Structured Carbon.

Aqueous Li-ion battery enabled by halogen conversion–intercalation chemistry in graphite

Unlocking Reversible Silicon Redox for High‐Performing Chlorine Batteries

A rechargeable Ca/Cl2 battery

Rechargeable alkali metal-chlorine batteries: advances, challenges, and future perspectives

Low-cost AlCl3/Et3NHCl Electrolyte for High-Performance Aluminum-Ion Battery

Chloride Ion as Redox Mediator in Reducing Charge Overpotential of Aprotic Lithium‐Oxygen Batteries

Achieving high-concentration Cl− ions in non-aqueous electrolytes for high-energy-density Li-Cl2 batteries

Cobalt chloride-ferric chloride-graphite Bi-Intercalation compounds as anode materials for high-performance lithium-ion batteries

Making SOCl2 Rechargeable

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Experimental insight into the structure-property relationship and lithium storage mechanism of hydroxyl chloride anchored in the 3D porous conductive matrix

Regulated lithium deposition behavior by chlorinated hybrid solid-electrolyte-interphase for stable lithium metal anode

Effectively Regulating More Robust Amorphous Li Clusters for Ultrastable Dendrite‐Free Cycling

Advanced Rechargeable Aluminium Ion Battery with a High-Quality Natural Graphite Cathode

A Novel Graphite-Graphite Dual Ion Battery Using an AlCl3-[EMIm]Cl Liquid Electrolyte