Abstract:Miscible CO2 flooding gains rising popularity due to high displacement efficiency and potential carbon negativity. It is well documented that pore-level heterogeneity is one of the dominant mechanisms responsible for the variation in oil recovery efficiencies of miscible CO2 flooding. However, owing to a lack of understanding of miscible CO2 displacement behaviors at pore level, quantitative analysis of the mechanisms for the influence of pore-level heterogeneity on the oil recovery efficiency of miscible CO2 flooding remains problematical. Recently, NMR has been widely used to investigate microscopic residual oil distribution and pore-level displacement behaviors of various agents. Nevertheless, current NMR-based methods for determining microscopic residual oil distribution require the use of fluorinated oil, Mn2+ solution, or heavy water for eliminating the mutual interference of oil and water NMR signals. The differences in properties of reservoir fluids and additional agents could give rise to the change in displacement characteristics and consequently affect the analysis results on pore-level displacement behaviors. In this study, a method to determine microscopic residual oil distribution in sandstone during gas floodings based on NMR T2 spectrum without additional agents except reservoir fluids is proposed. Using the method, we can avoid the possible changes in the displacement characteristics caused by additional agents. Miscible CO2 flooding experiments are conducted with ultra-low and extra-low permeability cores. The T2 spectra of cores before and after flooding are measured using a 23 MHz low-field NMR instrument. Residual oil distributions in cores are quantitatively characterized using the proposed method, and then, oil recovery efficiencies from different-sized pore throats are evaluated. It is found that for both cores about 60% of the residual oil is distributed in pore throats with 0.03 μm radius is displaceable for miscible CO2 flooding, which indicates that the thickness of the raffinate layer in the pore should be less than 0.015 μm. More than 30% of the residual oil is distributed in unswept areas, and thus, the sweep efficiency improvement is expected to effectively enhance the oil recovery of miscible CO2 flooding. The sweep efficiency is negatively affected by the pore-size heterogeneity. For the ultra-low and extra-low permeability cores, the standard deviation of pore size is 0.39 and 1.15, respectively, and correspondingly, the sweep efficiency is 84.33% and 72.84%, respectively. In the core, the oil recovery efficiencies from swept pore throats with 3 μm radius can form a preferred flow path, which will significantly reduce the oil displacement efficiency from swept pore throats with <3 μm radius. The findings of this study can help for better understanding of the microscopic CO2 miscible displacement behaviors and the mechanisms for the influence of pore-level heterogeneity on the oil recovery efficiency of miscible CO2 flooding.

Performance Evaluation of CO 2 Soaking and Flooding Processes in Tight Oil Reservoirs

Recovery of Adsorbed and Free Oil in Shale Formations by CO2 Injection: an Experimental Study Using 1D- and 2D-NMR

Asphaltene precipitation and reservoir damage characteristics of CO2 flooding in different microscopic structure types in tight light oil reservoirs

Investigating Asphaltene Precipitation and Deposition in Ultra-Low Permeability Reservoirs during CO2-Enhanced Oil Recovery

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

The Difference in Damage to Low-Permeability Reservoirs by Different Injection Methods of CO2 Flooding

Experimental investigating of the effect of CO2 injection parameters on asphaltene precipitation and formation damage in live oil

Oil production enhancement, asphaltene precipitation and permeability damage during CO2-SAG flooding of multi-layer sandstone reservoirs

Oil production performance and reservoir damage distribution of miscible CO2 soaking-alternating-gas (CO2-SAG) flooding in low permeability heterogeneous sandstone reservoirs

Laboratory Study on the Oil Displacement Process in Low-Permeability Cores with Different Injection Fluids

Experimental investigation of carbon dioxide flooding in heavy oil reservoirs for enhanced oil recovery

Characterization of Residual Oil Distribution in Sandstone by NMR: A Microscopic View on Oil Recovery by Miscible CO2 Flooding

Experimental Investigation of the CO 2 Flooding Characteristics of Tight Sandstone Reservoirs Using a High-Temperature and -Pressure Visualization Apparatus

Research on the Differential Oil Producing in the Various Scale Pores under Different CO 2 Flooding Modes with a Fluid Distribution Pore Classification Method

Mechanism of CO2 enhanced oil recovery in shale reservoirs

Effects of Kerogen on the Flow and EOR Performance of Oil in Shale Cores during CO2 Flooding Process Investigated by NMR Technology

The Three-Dimensional Heterogeneous Simulation Study of CO2 Flooding in Low-Permeability Reservoirs

Effect of pore structure and injection pressure on waterflooding in tight oil sandstone cores using NMR technique and pore network simulation

Experimental study on CO2/Water flooding mechanism and oil recovery in ultralow - Permeability sandstone with online LF-NMR

Experimental study on EOR performance of CO2-based flooding methods on tight oil

Experimental investigation of CO2 storage and oil production of different CO2 injection methods at pore-scale and core-scale