Abstract:Herein, a novel in-plane dual-axis micro-electro-mechanical system piezoresistive accelerometer was proposed based on theoretical and simulation analyses. Its self-support piezoresistive beam (SPB) possessed the features of force amplification and axial deformation to obtain high sensitivity. To clarify the influence of structural dimensions on the performance of the accelerometer and the pure axial-deformation condition of the SPB, a theoretical model was established to analyze mechanical behavior. The theoretical results were in well accordance with the simulation ones, displaying a maximum relative error of less than 10%. The theoretical and simulation results suggested that the accelerometer with thin and long support/hinge beams possesses a higher sensitivity but a lower frequency. However, the sensitivity and natural frequency increased simultaneously before the distance between SPB and support beam $D$ reached a certain value. The simulated longitudinal stress of SPB achieved the average value of 32.473 MPa, and the first-order natural frequency was nearly 13.6 kHz. Furthermore, the fabricated accelerometer was tested in a simple packaging case. The experimental results demonstrated that the proposed accelerometer had a measuring sensitivity of 0.198 mV/g/V with a maximum non-linearity of 1.00% FS and a resonant frequency of 12.93 kHz. The cross sensitivities were 11.93 and $15.97~\mu \text{V}$ /g/5V in the $y$ and $z$ axes, respectively, which were 1.21% and 1.61% of the prime-axis sensitivity. The zero offset with varying temperatures was 0.00296%/°C, and the zero drift in the long-term static stability test was 0.02 mV. All the results above revealed the promising application potential of the proposed accelerometer in vibration detection in the high-speed rotating spindle of machine tools. [2022-0057]

A MEMS Accelerometer for Spindle Monitoring System

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

A New Type of MEMS Accelerometer with Up-Tuning Structure

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

MEMS high-frequency accelerometers for mechanical fault monitoring

Design & Fabrication of a MEMS Piezoresistive Accelerometer with Beam-Film Combined Structure

A MEMS Resonant Accelerometer for Low-Frequency Vibration Detection

Modeling and Characterization of a Novel In-Plane Dual-Axis MEMS Accelerometer Based on Self-Support Piezoresistive Beam

Wireless Self-Powered Vibration Sensor System for Intelligent Spindle Monitoring

A High-Performance Multi-Beam Microaccelerometer for Vibration Monitoring in Intelligent Manufacturing Equipment

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

High-precision Vibration Detection Based on Nano-Cavity Optomechanical Accelerometer

Transient vibration signal acquisition system based on MEMS accelerometer

A MEMS Based Electrochemical Vibration Sensor for Seismic Motion Monitoring

High Sensitivity Optical MEMS Accelerometer Based on a Metal Fabry–Pérot Microcavities Wavelength Modulation System

Design of Electromechanical characteristics Measuring System for MEMS Scanner

A novel system to measure MEMS motion

A MEMS Based Fabry–Pérot Accelerometer with High Resolution

A High-Sensitivity MEMS Accelerometer Using a Sc0.8Al0.2N-Based Four Beam Structure

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control