Abstract:The inverted pendulum is controlled in this article by using the nonlinear control theory. From classical analytical mechanics, its substructure equation of motion is derived. Because of the inclusion of the restoring forces, the Taylor expansion is employed to facilitate the analysis. An estimated satisfactory periodic solution is obtained with the aid of the modified Homotopy perturbation method. A numerical technique based on the fourth-order Runge-Kutta method is employed to justify the previous solution. On the other hand, a positive position feedback control is developed to dampen the vibrations of an IP system subjected to multi-excitation forces. The multiple time scale perturbation technique of the second order is introduced as a mathematical method to solve a two-degree-of-freedom system that simulates the IP with the PPF at primary and 1:1 internal resonance. The stability of these solutions is checked with the aid of the Routh-Hurwitz criterion. A set of graphs, based on the frequency response equations resulting from the MSPT method, is incorporated. Additionally, a numerical simulation is set up with RK-4 to confirm the overall controlled performance of the studied model. The quality of the solution is confirmed by the match between the approximate solution and the numerical simulation. Numerous other nonlinear systems can be controlled using the provided control method. Illustrations are offered that pertain to implications in design and pedagogy. The linearized stability of IP near the fixed points as well as the phase portraits is depicted for the autonomous and non-autonomous cases. Because of the static stability of the IP, it is found that its instability can be suppressed by the increase of both the generalized force as well as the torsional constant stiffness of the spring. Additionally, the presence of the magnetic field enhances the stability of IP.

Flatness Based Active Disturbance Rejection Control For Cart Inverted Pendulum And Experimental Study

Stabilization and Tracking Control of X-Z Inverted Pendulum Using Flatness Based Active Disturbance Rejection Control

A New Robust Adaptive Control of Uncertain Nonlinear Systems and Pendulum Application

Design of Active Disturbance Rejection Controller for Compass-Like Biped Walking

Stabilization of the double inverted pendulum based on discrete-time model predictive control.

Stabilize the planar single inverted pendulum based on LQR.

A Position Control Based on Active Disturbance Rejection Controller Considering Parameter Variations of Harmonic Drive Gear Systems

On Stabilization and Disturbance Rejection for the Inverted Pendulum

Controllability of a planar inverted pendulum on a cart

Flatness-Based Active Disturbance Rejection Control for a PVTOL Aircraft System with an Inverted Pendular Load

Energy Shaping Control of an Inverted Flexible Pendulum Fixed to a Cart

Discrete-Time State-Feedback Controller with Canonical Form on Inverted Pendulum (on a cart)

Trajectory Tracking and Disturbance Rejection Control of Random Linear Systems

Flatness‐based sliding mode control for stabilizing a spherical pendulum on a quadrotor

Dynamic Linearization Based Adaptive Nonlinear Active Disturbance Rejection Control

Spherical Inverted Pendulum on a Quadrotor UAV: A Flatness and Discontinuous Extended State Observer Approach

A reference model-based backstepping anti-interference control method and its application to inverted pendulum

Simulation and Robustness Studies on an Inverted Pendulum

Linear Active Disturbance Rejection Control for Double-Pendulum Overhead Cranes

Dynamical analysis of an inverted pendulum with positive position feedback controller approximate uniform solution

Finite-time disturbance observer-based trajectory tracking control for flexible-joint robots