Controllability of a planar inverted pendulum on a cart

M. Isabel Caiado

DOI: https://doi.org/10.48550/arXiv.1203.4533

2012-03-21

Abstract:Using tools and techniques from geometric control theory, namely Hermann-Nagano theorem, we prove controllability result for a mechanical system consisting of a planar double inverted pendulum fixed to a wheeled cart that can move linearly along a horizontal track.

Optimization and Control

What problem does this paper attempt to address?

Linear Strong Structural Controllability for an N-Link Inverted Pendulum in a Cart

Xin,Kanjian Zhang,Haikun Wei

DOI: https://doi.org/10.1109/cdc.2018.8619302

2018-01-01

Abstract:A multilink inverted pendulum connected to a cart moving in a same vertical plane is typical underactuated mechanical system studied in both control and robotic communities. This paper presents the motion equation for an n-link inverted pendulum in a cart without any assumption on the physical parameters of the pendulum. Based on the motion equation and some properties of the physical parameters of the pendulum, this paper proves that such a system is linearly controllable around its upright equilibrium point (all its links in the upright position and the cart in the origin) for all its possible physical parameters; that is, such a system is linearly strongly structurally controllable around the point. This paper validates the above result via two existing physical systems of 3-link inverted pendulum in a cart.
Dynamics and Control of a Chain Pendulum on a Cart

Taeyoung Lee,Melvin Leok,N. Harris McClamroch

DOI: https://doi.org/10.48550/arXiv.1211.4604

2012-11-20

Abstract:A geometric form of Euler-Lagrange equations is developed for a chain pendulum, a serial connection of $n$ rigid links connected by spherical joints, that is attached to a rigid cart. The cart can translate in a horizontal plane acted on by a horizontal control force while the chain pendulum can undergo complex motion in 3D due to gravity. The configuration of the system is in $(\Sph^2)^n \times \Re^2$. We examine the rich structure of the uncontrolled system dynamics: the equilibria of the system correspond to any one of $2^n$ different chain pendulum configurations and any cart location. A linearization about each equilibrium, and the corresponding controllability criterion is provided. We also show that any equilibrium can be asymptotically stabilized by using a proportional-derivative type controller, and we provide a few numerical examples.

Optimization and Control
Stabilize the planar single inverted pendulum based on LQR.

Feng Liu,Yongchuan Tang,Qian Qi

DOI: https://doi.org/10.1109/ICAL.2011.6024720

2011-01-01

Abstract:This paper firstly analyses the physical model of planar single inverted pendulum system, then builds the mathematical model of this system based on Lagrangian mechanics. These characteristics: multi-parameter, less-driven, strong coupling and highly nonlinearity make it difficult to stabilize the planar inverted pendulum system. But nearby the upright equilibrium of this system, the nonlinear mathematical model of the system can be linearized and get decoupled in X-axis and Y-axis. Then two LQR controllers are designed for each linear inverted pendulum in each axis respectively, and they are almost the same. At last, the simulation experiments in MATLAB test and verify the mathematical model is right and the control policy is effective. © 2011 IEEE.
Stabilization of the double inverted pendulum based on discrete-time model predictive control.

Qian Qi,Dongmei Deng,Feng Liu,Yongchuan Tang

DOI: https://doi.org/10.1109/ICAL.2011.6024721

2011-01-01

Abstract:The double inverted pendulum is an absolute unstable, high-order, multi-parameter, less-driven and nonlinear system. To stabilize the inverted pendulum, the incremental mathematical model of this system is built based on the Lagrangian mechanics. The discrete-time model predictive control based on the Laguerre series is a new novel control technology, which uses Laguerre series to represent the trace of control signal in the future and optimizes the trace simultaneously. What's more, the technology can bring in the digital integral factor in the control system to improve the ability of anti-interference. So it is applied to stabilize the double inverted pendulum. The simulation experiment shows that the control strategy is effective and practical. © 2011 IEEE.
Linear Controllability of Two Multi-Link Robotic Systems with Multiple Unactuated Joints

Xin,Yannian Liu,Kanjian Zhang

DOI: https://doi.org/10.1016/j.isatra.2022.05.028

IF: 7.3

2022-01-01

ISA Transactions

Abstract:We deal with the linear controllability of two underactuated multi-link robotic systems in this paper. First, for a general n-link inverted pendulum mounted on a cart in a vertical plane, we prove that it is linearly controllable around the equilibrium point with the cart in a desired position and each link of the pendulum in the upright position regardless of its physical parameters, if and only if the cart is actuated. Second, for an n-link underactuated planar robot with its first joint mounted on a fixed base in a horizontal plane, we prove that it is linearly controllable around the trajectory where each link of the robot stretches straight out and rotates with a constant angular velocity, if and only if its first joint is actuated, regardless of its physical parameters and regardless of the actuation or underactuation of its rest joints. We illustrate the above results via a quintuple pendulum-cart system and a four-link planar gymnastic robot in literature. We give new insights into the linear controllability around an equilibrium point or a trajectory of underactuated robotic planar systems with multiple unactuated joints.
Energy Shaping Control of an Inverted Flexible Pendulum Fixed to a Cart

Prasanna S. Gandhi,Pablo Borja,Romeo Ortega

DOI: https://doi.org/10.1016/j.conengprac.2016.07.010

2016-05-10

Abstract:Control of compliant mechanical systems is increasingly being researched for several applications including flexible link robots and ultra-precision positioning systems. The control problem in these systems is challenging, especially with gravity coupling and large deformations, because of inherent underactuation and the combination of lumped and distributed parameters of a nonlinear system. In this paper we consider an ultra-flexible inverted pendulum on a cart and propose a new nonlinear energy shaping controller to keep the pendulum at the upward position with the cart stopped at a desired location. The design is based on a model, obtained via the constrained Lagrange formulation, which previously has been validated experimentally. The controller design consists of a partial feedback linearization step followed by a standard PID controller acting on two passive outputs. Boundedness of all signals and (local) asymptotic stability of the desired equilibrium is theoretically established. Simulations and experimental evidence assess the performance of the proposed controller.

Systems and Control
Simulation and Robustness Studies on an Inverted Pendulum

Huang Chun-E,Li Dong-Hai,Su Yong

2011-01-01

Abstract:In this paper, angular control of the pendulum and position control of the cart for an inverted pendulum are considered, and the design of its four typical controllers are introduced by using PID control, fuzzy control, state feedback control and TC control. Simulation results and Monte-Carlo experiments show that the four controllers have good performance and robustness when the initial angle is 0.3 radians.
Turning Motion Control Design of a Two-Wheeled Inverted Pendulum Using Curvature Tracking and Optimal Control Theory

Yusheng Zhou,Zaihua Wang,Kwok-wai Chung

DOI: https://doi.org/10.1007/s10957-019-01472-4

2019-01-28

Journal of Optimization Theory and Applications

Abstract:This paper presents a control design method for implementing planar turning motion of a two-wheeled inverted pendulum with an input delay. The control task requires that the inverted pendulum is kept stabilized during the whole turning motion process along a pre-settled curve. Firstly, by using the theory of planar curve, key observations about the motion law of the two-wheeled mobile chassis are made and they are used to set up a dynamical trajectory tracking target. Then, by adjusting the parameters in the tracking target and the weights in the quadratic performance criterion, the optimal integral sliding mode controller based on a linear quadratic regulator is designed for keeping the vehicle body stabilized and tracking a circular path for the two-wheeled inverted pendulum. An illustrative example is given to demonstrate the validity of the theory with numerical simulation.

mathematics, applied,operations research & management science
Control of Inverted Pendulum Involving Rolling Friction and Its Mechatronics Co-Simulation

Guang-Chen Bai

2011-01-01

Abstract:The problem of controlling an inverted pendulum carried by a cart with friction between wheels and road is researched.First the state-space expressions for the inverted pendulum system,which included the rolling friction,are deduced.Then based on it,the PD method,optimal control and pole-placement method are adopted respectively to design the controllers for the inverted pendulum system involving rolling friction.Finally,on the ADAMS-Simulink co-simulation platform,the three controllers are verified taking the virtual prototype of an inverted pendulum system as control objective.The results show that the three methods are all efficient when they are used to control the inverted pendulum system,so it can be concluded that the mathematics modeling for the inverted pendulum system involving rolling friction is correct and reasonable.
A new discrete mechanics approach to swing-up control of the cart-pendulum system

Tatsuya Kai,Kensuke Bito

DOI: https://doi.org/10.1016/j.cnsns.2013.05.021

IF: 4.186

2014-01-01

Communications in Nonlinear Science and Numerical Simulation

Abstract:This paper develops a new swing-up control method for the cart-pendulum system via discrete mechanics. The swing-up control law consists of two parts: the swing-up stage and the stabilization one. In the swing-up stage, we use a controller based on a discrete Lyapunov function and it can swing up the pendulum. Then, in the stabilization stage, we utilize a stabilizing controller based on the linearized system and discrete-time optimal regulator theory. In addition, transformation methods from discrete control inputs into continuous zero-order hold inputs are introduced. From some simulation results, we can confirm that the cart-pendulum system is swung up and stabilized by our new method.

mathematics, applied, interdisciplinary applications,mechanics,physics, mathematical, fluids & plasmas
Discrete-Time State-Feedback Controller with Canonical Form on Inverted Pendulum (on a cart)

Bambang L. Widjiantoro,Moh Kamalul Wafi

2023-04-17

Abstract:The scope of inverted pendulum has been widely studied as one of the notable research with respect to standing in balance. The concept of this pendulum is similar to missile guidance, meaning that the center of drag is ahead that of gravity. Mathematical model of inverted pendulum on a cart is moreover presented in this paper. Various rewarding parameters are proposed from the displacement of the pivot, angular rotation, to external force exerted on the carriage so as to gain its equilibrium points and the linearized systems. Due to the severe risk of instability, a reliable closed-loop state feedback controller is designed to stabilize in upright position, even with large deviations. The specific concept proposed is to apply the canonical form of computing the determinant of gain $K$ leading to $K_d$. The results show that the constructed design can maintain the stability of the system by applying three sorts of initial condition and choosing sampling time $T$ under $0.2$ with small possible degrading performance.

Systems and Control
Design and Experiment of Variable Structure Controlle for Double Inverted Pendulum

LIU Chen,ZHOU Jun

DOI: https://doi.org/10.3969/j.issn.1671-1815.2007.07.017

2007-01-01

Abstract:Control law of the variable structure controller for the inverted pendulum system.is compared In order to reduce the flutter phenomenon of the variable structure controller system,a method to improve variable structure control law is proposea.The simulation and experimental results show that the present method is effective.
Flatness Based Active Disturbance Rejection Control For Cart Inverted Pendulum And Experimental Study

Jinwen Pan,Shimin Qi,Yong Wang

DOI: https://doi.org/10.1109/ACC.2015.7172096

2015-01-01

Abstract:A flatness based robust active disturbance rejection control technique scheme is proposed for the problem of stabilization and tracking control of a special underactuated, non-feedback linearizable mechanical system known as the cart inverted pendulum. The differential parametrization on the basis of linearizing the system around an arbitrary equilibrium decouples the underactuated systems into two lower systems, leading to two lower state observers, based on which the active disturbance rejection control is derived. An observer based active disturbance rejection controller without considering the decoupling property is also designed to be compared. Simulation and experimental results on the stabilization of the pendulum angle and tracking control of the cart position are presented to show the advantages of the combination of the flatness, the decoupling property and the active disturbance rejection control technique.
Global stabilization of controlled nonlinear system "inverted pendulum on a cart" using method of two Lyapunov functions

B. L. Mazov

DOI: https://doi.org/10.48550/arXiv.math/0312495

2003-12-31

Abstract:Title: Global stabilization of control nonlinear system "inverted pendulum on a cart" using method of two Lyapunov functions Authors: B. L. Mazov (Nizhny Novgorod Technical University) Comments: 10 pages Subj-class: Dynamical Systems MSC-class: 34D23 (Primary); 93H10 (Secondary) In this work a mathematical apparatus for method of several global Lyapunov functions is applied to study the stability properties of nonlinear model of concrete singularly perturbed mechanical system "inverted pendulum on a cart" with discontinuous relay-type control. In this analysis, the concept of solution in sense of Gelig et al. is used.

Dynamical Systems
A Constructive Self-Balancing Controlled Lagrangian For Wheeled Inverted Pendulum

Morteza Tayefi,Zhiyong Geng

DOI: https://doi.org/10.1109/CCDC.2016.7531269

2016-01-01

Abstract:This work presents a controlled Lagrangian for the wheeled inverted pendulum system in which the upward position of the pendulum becomes a stable nonlinear equilibrium. Unlike the general form of underactuated systems, the configuration variables are not partitioned into actuation and underactuated subsets and instead we show that the energy shaping and matching conditions can be achieved in a constructive procedure. The asymptotic stability is guaranteed by the definiteness of the shaped energy and applying a suitable dissipation. We also apply this self-balancing control to the system which is partially linearized and controlled in the wheel position. The efficiency of the control law along with the wheel positioning is observed by simulation.
On topological obstructions to global stabilization of an inverted pendulum

Ivan Polekhin

DOI: https://doi.org/10.48550/arXiv.1704.03698

2017-09-26

Abstract:We consider a classical problem of control of an inverted pendulum by means of a horizontal motion of its pivot point. We suppose that the control law can be non-autonomous and non-periodic w.r.t. the position of the pendulum. It is shown that global stabilization of the vertical upward position of the pendulum cannot be obtained for any Lipschitz control law, provided some natural assumptions. Moreover, we show that there always exists a solution separated from the vertical position and along which the pendulum never becomes horizontal. Hence, we also prove that global stabilization cannot be obtained in the system where the pendulum can impact the horizontal plane (for any mechanical model of impact). Similar results are presented for several analogous systems: a pendulum on a cart, a spherical pendulum, and a pendulum with an additional torque control.

Optimization and Control,Classical Analysis and ODEs,Classical Physics
Adaptive Sliding Mode Fuzzy Control of Planar Inverted Pendulum

DUAN Xue-chao,QIU Yuan-ying,DUAN Bao-yan

DOI: https://doi.org/10.3321/j.issn:1001-0920.2007.07.011

2007-01-01

Abstract:A dynamical model of the planar inverted pendulum is developed by using Lagrange equations. By the linearization of the model at its equilibrium yields, the decoupled linear systems of the inverted pendulum in two perpendicular control directions are obtained. Both of the two systems consist of two coupled subsystems including positioning subsystem of the base cart and balancing system of the pole. For each direction, the adaptive sliding mode fuzzy control approach is developed. Finally, the circular motion of the base cart is implemented and the pole is kept balance. A motion experiment shows the effectiveness of the adaptive sliding mode fuzzy control strategy.
Stabilization of an Inverted Pendulum Cart with a Balancing Mechanism by Consistent Trajectories in Acceleration Behavior

Takayuki Matsuno,Jian Huang,Toshio Fukuda,Katsunori Doi

DOI: https://doi.org/10.20965/jrm.2013.p0262

2010-01-01

The Abstracts of the international conference on advanced mechatronics toward evolutionary fusion of IT and mechatronics ICAM

Abstract:New personal vehicles are required in current society because of necessity of low-carbon system. At present, most personal vehicles require a driver to have a certain level of physical ability. Low-carbon personal vehicles should, however, be made available to people with lower levels of physical ability, such as the elderly. The present paper therefore proposes an inverted pendulum cart that incorporates a balancing mechanism with actuating a seated driver. In the case of the proposed inverted pendulum cart, since the driver does not have to be able to maintain balance in order to cause the vehicle to accelerate, the proposed cart can be used by almost anyone. In addition, a control method using both input generated by desired acceleration trajectories and dynamics-canceling input is proposed. The effectiveness of the proposed control method is confirmed by simulation.
Analysis of the Energy Control Based Swinging Up Control System of Two Inverted Pendulums

Xin XIN,Masahiro KANEDA

DOI: https://doi.org/10.9746/sicetr1965.39.835

2003-01-01

Transactions of the Society of Instrument and Control Engineers

Abstract:This paper studies the energy based control for swinging up two inverted pendulums on a cart. This paper presents an original and detail analysis of the convergence of the energies of two pendulums and provides the condition such that the pendulums can be swung up. Moreover, the motion of two pendulums under the energy based control is investigated and the stability analysis of the motion is carried out via the concept of stability of an invariant set. All these analyses not only show theoretically the effectiveness of the energy based control for swinging up two pendulums, but also pave an way for analyzing and designing the energy based control for more complicated underactuated mechanical systems.
Triple inverted-pendulum system and analysis of its controllability and observability

Yanyan He,Chengzhi Shen

1996-01-01

Abstract:The controllability and observability of a triple inverted-pendulum for a single motor is discussed. After constructing a mathematical model of the system and linearizing around the equilibrium state, the linear mathematical model was obtained. According to the theorem of controllability and observability, the system is controllable and observable.

Controllability of a planar inverted pendulum on a cart

Linear Strong Structural Controllability for an N-Link Inverted Pendulum in a Cart

Dynamics and Control of a Chain Pendulum on a Cart

Stabilize the planar single inverted pendulum based on LQR.

Stabilization of the double inverted pendulum based on discrete-time model predictive control.

Linear Controllability of Two Multi-Link Robotic Systems with Multiple Unactuated Joints

Energy Shaping Control of an Inverted Flexible Pendulum Fixed to a Cart

Simulation and Robustness Studies on an Inverted Pendulum

Turning Motion Control Design of a Two-Wheeled Inverted Pendulum Using Curvature Tracking and Optimal Control Theory

Control of Inverted Pendulum Involving Rolling Friction and Its Mechatronics Co-Simulation

A new discrete mechanics approach to swing-up control of the cart-pendulum system

Discrete-Time State-Feedback Controller with Canonical Form on Inverted Pendulum (on a cart)

Design and Experiment of Variable Structure Controlle for Double Inverted Pendulum

Flatness Based Active Disturbance Rejection Control For Cart Inverted Pendulum And Experimental Study

Global stabilization of controlled nonlinear system "inverted pendulum on a cart" using method of two Lyapunov functions

A Constructive Self-Balancing Controlled Lagrangian For Wheeled Inverted Pendulum

On topological obstructions to global stabilization of an inverted pendulum

Adaptive Sliding Mode Fuzzy Control of Planar Inverted Pendulum

Stabilization of an Inverted Pendulum Cart with a Balancing Mechanism by Consistent Trajectories in Acceleration Behavior

Analysis of the Energy Control Based Swinging Up Control System of Two Inverted Pendulums

Triple inverted-pendulum system and analysis of its controllability and observability