Abstract:The Conventional Coordinate Rotation Digital Computer (CORDIC) algorithm has been widely used in many applications, particularly in Direct Digital Frequency Synthesizers (DDS) and Fast Fourier Transforms (FFT). However, CORDIC is constrained by the excessive number of iterations, angle data path, and scaling factor compensation. In this article, an enhanced adaptive recoding CORDIC (EARC) is proposed. It uses the enhanced adaptive recoding method to reduce the required iterations and adopts the trigonometric transformation scheme to scale up the rotation angles. Computing sine and cosine is used first to compare the core functionality of EARC with basic CORDIC; then a 16-bit DDS and a 1,024-point FFT based on EARC are evaluated to demonstrate the benefits of EARC in larger applications. All the proposed architectures are validated on a Virtex 5 FPGA development platform. Compared with a commercial implementation of CORDIC, EARC requires 33.3&percnt; less hardware resources, provides a twofold speedup, dissipates 70.4&percnt; less power, and improves accuracy in terms of the Bit Error Position (BEP). Compared to the state-of-the-art Hybrid CORDIC, EARC reduces latency by 11.1&percnt; and consumes 17&percnt; less power. Compared with a commercial implementation of DDS, the dissipated power of the proposed DDS is reduced by 27.2&percnt;. The proposed DDS improves Spurious-Free Dynamic Range (SFDR) by nearly 7 dBc and dissipates 21.8&percnt; less power when compared with a recently published DDS circuit. The FFT based on EARC dissipates a factor of 2.05 less power than the commercial FFT even when choosing the 100&percnt; toggle rate for the FFT based on EARC and the 12.5&percnt; toggle rate for the commercial FFT. Compared with a recently published FFT, the FFT based on EARC improves Signal-to-Noise Ratio (SNR) by 8.9 dB and consumes 7.78&percnt; less power.

FPGA implementation of low-power and high-PSNR DCT/IDCT architecture based on adaptive recoding CORDIC

A Novel Low-Power and High-PSNR Architecture Based on ARC for DCT/IDCT

A Unified Idct Architecture For Multi-Standard Video Codecs

A novel CORDIC based unified architecture for DCT and IDCT

An Enhanced Adaptive Recoding Rotation CORDIC.

Implementation of two-dimensional DCT/IDCT for real-time video encoding

CORDIC-Based Unified Architectures for Computation of DCT/IDCT/DST/IDST

A Reconfigurable Architecture for Discrete Cosine Transform in Video Coding

The Design and Implementation of a Novel 2-DCT/IDCT Architecture

Effective Hardware Accelerator for 2D DCT/IDCT Using Improved Loeffler Architecture

A New Area and Power Efficient DCT Circuits Using Sporadic Logarithmic Shifters

Low power 2-D DCT design

A 250mhz Optimized Distributed Architecture Of 2d 8x8 Dct

Implementation of FPGA design of FFT architecture based on CORDIC algorithm

Reduced Memory and Low Power Architectures for Cordic-Based Fft Processors

FPGA implementation of short critical path CORDIC-based approximation of the eight-point DCT

An Area Efficient High Performance DCT Distributed Architecture for Video Compression

A High-Performance VLSI Architecture for CABAC Decoding in H.264/AVC

A Row-parallel 8$\times$8 2-D DCT Architecture Using Algebraic Integer Based Exact Computation

An Efficient FPGA Architecture for Reconfigurable FFT Processor Incorporating an Integration of an Improved CORDIC and Radix-2r Algorithm

FPGA implementation of high-performance, resource-efficient Radix-16 CORDIC rotator based FFT algorithm