Abstract:The Conventional Coordinate Rotation Digital Computer (CORDIC) algorithm has been widely used in many applications, particularly in Direct Digital Frequency Synthesizers (DDS) and Fast Fourier Transforms (FFT). However, CORDIC is constrained by the excessive number of iterations, angle data path, and scaling factor compensation. In this article, an enhanced adaptive recoding CORDIC (EARC) is proposed. It uses the enhanced adaptive recoding method to reduce the required iterations and adopts the trigonometric transformation scheme to scale up the rotation angles. Computing sine and cosine is used first to compare the core functionality of EARC with basic CORDIC; then a 16-bit DDS and a 1,024-point FFT based on EARC are evaluated to demonstrate the benefits of EARC in larger applications. All the proposed architectures are validated on a Virtex 5 FPGA development platform. Compared with a commercial implementation of CORDIC, EARC requires 33.3&percnt; less hardware resources, provides a twofold speedup, dissipates 70.4&percnt; less power, and improves accuracy in terms of the Bit Error Position (BEP). Compared to the state-of-the-art Hybrid CORDIC, EARC reduces latency by 11.1&percnt; and consumes 17&percnt; less power. Compared with a commercial implementation of DDS, the dissipated power of the proposed DDS is reduced by 27.2&percnt;. The proposed DDS improves Spurious-Free Dynamic Range (SFDR) by nearly 7 dBc and dissipates 21.8&percnt; less power when compared with a recently published DDS circuit. The FFT based on EARC dissipates a factor of 2.05 less power than the commercial FFT even when choosing the 100&percnt; toggle rate for the FFT based on EARC and the 12.5&percnt; toggle rate for the commercial FFT. Compared with a recently published FFT, the FFT based on EARC improves Signal-to-Noise Ratio (SNR) by 8.9 dB and consumes 7.78&percnt; less power.

CORDIC-Based Unified Architectures for Computation of DCT/IDCT/DST/IDST

An Efficient CORDIC Array Structure for the Implementation of Discrete Cosine Transform

A Unified Idct Architecture For Multi-Standard Video Codecs

FPGA implementation of low-power and high-PSNR DCT/IDCT architecture based on adaptive recoding CORDIC

Unified hardware architecture for 2D transform in H.266/VVC

A Unified Reconfigurable Floating-Point Arithmetic Architecture Based on CORDIC Algorithm

A 250mhz Optimized Distributed Architecture Of 2d 8x8 Dct

An improved scaled DCT architecture

Design and Implementation of a Novel Entirely Covered K 2 CORDIC

A New CORDIC Algorithm and Software Implementation Based on Synchronized Data Triggering Architecture

An Enhanced Adaptive Recoding Rotation CORDIC.

A Parallel Double-Step CORDIC Algorithm for Digital Down Converter

Hardware-Efficient Realization of Prime-Length DCT Based on Distributed Arithmetic

Fully Pipelined Dct/Idct/Hadamard Unified Transform Architecture for Hevc Codec

A Low-Latency CORDIC Algorithm Based on Pre-Rotation and Its Application on Computation of Arctangent Function

New Cost-Effective VLSI Implementation of 2D Discrete Cosine Transform and Its Inverse

A Unified Forward/Inverse Transform Architecture for Multi-Standard Video Codec Design

Device-Saving Pipeline Architectures of Multi-Dimensional Dct Similar Butterfly Algorithm

An Area Efficient High Performance DCT Distributed Architecture for Video Compression

Three Dimensional Dct Similar Butterfly Algorithm And Its Pipeline Architectures

A Row-parallel 8$\times$8 2-D DCT Architecture Using Algebraic Integer Based Exact Computation