Abstract:Structural health monitoring (SHM) system provides an efficient way to the diagnosis and prognosis of critical and large‐scale civil infrastructures like long‐span bridges. This paper presents a long‐term condition assessment approach of suspenders in a cable‐suspension bridge under in‐service traffic loads based on structural monitoring technique. The traffic loads identified from a monitoring system, including both highway and railway traffic loads, and the finite element model of the bridge are employed to determine the axial force response of the suspender. The stochastic axial force response in the suspender is described by a filtered Poisson process, through which the maximum value distribution of axial forces in its design reference period can be derived using the Poisson Process theory. In this paper, the long‐term deterioration process of steel wires in the suspender considers simultaneously the uniform and pitting corrosion and the corrosion fatigue induced by both cyclic loading and environmental attack. Such a stochastic and coupled corrosion fatigue process of steel wires is simulated using the Monte Carlo method, and the time‐variant conditions of the suspender are subsequently assessed in a probabilistic way, such as crack depth, number of broken wires, ultimate strength, etc. In particular, two load conditions—the train loads alone and the combination of train load and road traffic load—are examined within this procedure in order to investigate their respective effects on the deterioration. By employing first‐order reliability method, the reliability indexes of the suspender under the traffic loads are further estimated in terms of the safety under the extreme traffic load distribution in the design reference period and the serviceability specified in the design specification. The discussions of the life‐cycle reliability indexes of the suspender provide guidance to the future decision making related to maintenance and replacement of suspenders, and it may also shed light on the long‐term condition assessment of other structural members. Copyright © 2010 John Wiley & Sons, Ltd.

A Test Method for Damage Diagnosis of Suspension Bridge Suspender Cables

Ultrasonic Guided Wave Approach Incorporating SAFE for Detecting Wire Breakage in Bridge Cable

Vibration-Based Damage Detection Of Cable-Stayed Bridges

DAMAGE LOCATING OF CABLE-STAYED BRIDGES BASED ON DYNAMIC MEASUREMENT AND NEURAL NETWORK TECHNIQUE

Experimental and Numerical Studies on A Test Method for Damage Diagnosis of Stay Cables

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

Numerical Validation of a Damage Diagnosis Method for Arch Bridges Hangers

Damage Detection In Bridges Using Static Difference Curvature

Multiple Damaged Cables Identification in Cable-Stayed Bridges Using Basis Vector Matrix Method

Damage identification in cable-stayed bridges based on the redistribution of dead and thermal loads

Cross spectral energy method for damage assessment of the cable-stayed bridge under operational conditions

Long-Term Condition Assessment of Suspenders under Traffic Loads Based on Structural Monitoring System: Application to the Tsing Ma Bridge

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

Long-Term In-Service Monitoring and Performance Assessment of the Main Cables of Long-Span Suspension Bridges

Damage Identification of Tie-Down Cables in Cable-Stayed Bridges Using Vehicle-Induced Displacement

Damage detection method for cables based on the change rate of wavelet packet total energy and a neural network

Research on the damage diagnosis model verification method of cable-stayed bridges

Detection of Tension Loss in Cables of Cable-Stayed Bridges by Distributed Monitoring of Bridge Deck Strains

Condition assessment of long span cable-stayed bridge