Abstract:This paper presents one of the first attempts of indirect Bridge Health Monitoring (BHM) for cable damage identification in a cable-stayed bridge. The premise of the work is to identify the location and the severity of a sustained structural damage to the cables, measured solely by vibration response of a moving vehicle passing over the bridge. To this aim, new formulations of dynamic coupling between the vehicle and the bridge are developed, utilizing finite element (FE) approach and validated. Further, the proposed framework to obtain the Vehicle-Bridge Interaction (VBI) is extended to a large-scale cable-stayed bridge. Various damage cases, caused by a partial and incremental change in structural stiffness of cables, being representative of gradual sectional loss due to corrosion, are taken into account. A damage index based on the Empirical Mode Decomposition (EMD) scheme is presented, and through extensive numerical investigations, it is demonstrated that under certain vehicle parameters the vehicle vibration response not only is capable of identifying the suffered damage to the bridge, but also is able to identify the damage location, and further to assess its severity. The contributions of the work are fourfold: (1) Many of the existing studies only focus on the simplified models of the bridge based on a simply supported Euler–Bernoulli beam theory; however, this paper extends the VBI framework to a three-dimensional numerical model of a large-scale bridge structure, being rarely reported in the BHM context. (2) The validation of the technique is demonstrated through extensive numerical investigations on a statically indeterminate cable-stayed bridge. (3) Successful detection, localization and assessment of damage to the cables are obtained using realistic range of vehicle parameters without any bridge response measurements. (4) Through extensive parametric study, the significance of various parameters on the effectiveness of the proposed approach is carefully investigated and discussed.

Damage Identification of Tie-Down Cables in Cable-Stayed Bridges Using Vehicle-Induced Displacement

DAMAGE LOCATING OF CABLE-STAYED BRIDGES BASED ON DYNAMIC MEASUREMENT AND NEURAL NETWORK TECHNIQUE

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Structural Damage Detection of Cable-Stayed Bridges Using Changes in Cable Forces and Model Updating

Damage identification of main girders for long span cable-stayed bridge based on flexibility matrix

An Improved Static Residual Force Algorithm and Its Application in Cable Damage Identification for Cable-Stayed Bridges

Multiple Damaged Cables Identification in Cable-Stayed Bridges Using Basis Vector Matrix Method

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure

Damage identification in cable-stayed bridges based on the redistribution of dead and thermal loads

Damage Identification in Hangers of Through-Arch Bridges Using Static Deflection Difference at the Anchorage Point

Experimental and Numerical Studies on A Test Method for Damage Diagnosis of Stay Cables

Drive-by-bridge inspection for damage identification in a cable-stayed bridge: Numerical investigations

Damage identification method for tied arch bridge suspender based on quasi-static displacement influence line

Real-time quantitative evaluation on the cable damage of cable-stayed bridges using the correlation between girder deflection and temperature

Early Warning for Abnormal Cable Forces of Cable-Stayed Bridges Considering Structural Temperature Changes

A Test Method for Damage Diagnosis of Suspension Bridge Suspender Cables

Identifying Damage in Long-Span Self-Anchored Suspension Bridges Using Characteristic Indices

Non-contact structural health monitoring of a cable-stayed bridge: case study

Damage identification of a large-span concrete cable-stayed bridge based on genetic algorithm

Assessing time-dependent damage to a cable-stayed bridge through multi-directional ground motions based on material strain measures