Electrospinning-derived transition metal/carbon nanofiber composites as electrocatalysts for Zn-air batteries

Chengxiao Xu,Yuzheng Li,Daming Li,Yingjie Zhang,Bo Liu,M. D. Hasan Akhon,Peipei Huo

DOI: https://doi.org/10.1039/d4nr00389f

IF: 6.7

2024-01-01

Nanoscale

Abstract:The morphology, mechanism and application of TM/CNF composites.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

Electrospun carbon nanofiber decorated with Co-Ni alloy nanoparticles as a bifunctional electrocatalyst for Zn-ir battery

Tianjiao Li,Yan Li,Heng-guo Wang,Zhenjun Si

DOI: https://doi.org/10.1016/j.matlet.2020.128135

IF: 3

2020-09-01

Materials Letters

Abstract:Carbon nanofiber decorated with Co-Ni alloy nanoparticles (NCCNFs) are prepared by the electrospinning technique and subsequent annealing process. Benefitting from the synergistic effect of component, NCCNFs can be served as the bifunctional oxygen catalyst with high-performance electrocatalytic activity. Moreover, a Zn-air battery using NCCNFs as the cathode catalyst delivers high power density and long-term cycle stability. This work opens new avenues to easily construct high-performance bifunctional electrocatalysts for metal-air batteries.

materials science, multidisciplinary,physics, applied
Electrospun nanofibers and their applications in rechargeable zinc–air batteries

Nadia Batool,Nazir Ahmad,Jiao Liu,Xiao-Feng Han,Tian-Heng Zhang,Wen-Tao Wang,Ruizhi Yang,Jing-Hua Tian

DOI: https://doi.org/10.1039/d0qm01003k

IF: 8.6834

2021-01-01

Materials Chemistry Frontiers

Abstract:Electrospinning, as an efficient approach to fabricate 1D nanomaterials, has been used widely to prepare electrocatalysts and membranes for ZABs.

materials science, multidisciplinary,chemistry
Janus Hollow Nanofiber with Bifunctional Oxygen Electrocatalyst for Rechargeable Zn-Air Battery.

Xing Chen,Jie Pu,Xuhui Hu,Yuechao Yao,Yibo Dou,Jianjun Jiang,Wenjing Zhang

DOI: https://doi.org/10.1002/smll.202200578

IF: 13.3

2022-01-01

Small

Abstract:Zn-air battery technologies have received increasing attention, while the application is hindered by the sluggish kinetics of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). In order to explore an efficient method to fabricate a high-performance electrocatalyst via modification of advanced nanostructure, a coaxial electrospinning method with in-situ synthesis and subsequent carbonization to construct 3D flexible Janus-like electrocatalysts is developed. The resulting Janus nanofibers have a unique core-shell hollow fiber structure, where NiFe alloy electrocatalysts supported by N-doped carbon nanobelt are located on the inner wall of the carbon layer, and leaf-like Co-N nanosheets are anchored on the outer wall of the carbon layer. As a result, the electrocatalyst exhibits excellent bifunctional catalytic performance for ORR and OER, demonstrating the small potential gap value of 0.73 V between the ORR half-wave potential and the OER potential at 10 mA cm-2 , which is even comparable to the mixed commercial noble catalyst with 20% Pt/C and RuO2 . The rechargeable Zn-air battery is constructed and displays a large open-circuit voltage of 1.44 V, high power density (130 mW cm-2 ) and energy density (874 Wh kg-1 ). This study provides a concept to synthesize and construct high performance bifunctional electrocatalysts.
Confinement synthesis of bimetallic MOF-derived defect-rich nanofiber electrocatalysts for rechargeable Zn-air battery

Xing Chen,Jie Pu,Xuhui Hu,Le An,Jianjun Jiang,Yujun Li

DOI: https://doi.org/10.1007/s12274-022-4563-4

IF: 9.9

2022-07-20

Nano Research

Abstract:Zn-air batteries with high energy density and safety have acquired enormous attention, while the practical application is hindered by the sluggish kinetics of the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). In this work, a three-dimensional (3D) defect-rich bifunctional electrocatalyst (CoFe/N CNFs) comprising irregular hollow CoFe nanospheres in N-doped carbon nanofibers is presented, which is fabricated from CoFe ZIFs-derived (ZIF: zeolitic-imidazolate framework) polymer nanofibers precursor. The CoFe ZIFs with tunable particle size and composition are constructed using a confined synthesis strategy. Moreover, the Kirkendall diffusion process is available for forming the irregular hollow CoFe nanospheres, and the decomposition of polyvinylpyrrolidone (PVP) results in forming the defective carbon nanofibers, which provide more efficient active sites and enhance the electrocatalytic properties toward both OER and ORR. The optimized CoFe/N CNFs exhibit superior bifunctional activities, outperforming that of the benchmark Pt/C + RuO 2 catalyst. As a result, the CoFe/N CNFs as an air-cathode endow the rechargeable Zn-air battery with an excellent power density of 149 mW·cm −2 , energy density of 875 Wh·kg −1 , and cycling stability. This work provides a new strategy to develop bifunctional electrocatalysts with desired nanostructure and regulated performance toward energy applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Bead-like cobalt-nitrogen co-doped carbon nanocage/carbon nanofiber composite: a high-performance oxygen reduction electrocatalyst for zinc-air batteries

Bo Zhang,Yige Zhao,Lu Li,Yukun Li,Jin Zhang,Guosheng Shao,Peng Zhang

DOI: https://doi.org/10.1007/s12274-022-4972-4

IF: 9.9

2022-09-23

Nano Research

Abstract:Proper regulation of metal-nitrogen carbon (M-N-C) materials derived from zeolitic imidazolate frameworks (ZIFs) is essential to enhance the oxygen reduction reaction (ORR) performance. However, most of the reports focus on the component regulation, and the structure regulation of ZIFs-derived M-N-C materials by a simple preparation method has been barely reported. Herein, using a one-step electrospinning method with subsequent pyrolysis, we have prepared a bead-like cobalt-nitrogen co-doped carbon nanocage/carbon nanofiber (Co-N-C/CNF) composite electrocatalyst with the porous carbon nanocages arranged one by one in the highly conductive carbon nanofibers. Profiting from the fully exposed active sites and improved conductivity, the Co-N-C/CNF catalyst exhibits an excellent ORR performance even surpassing the commercial Pt/C catalyst. Density functional theory (DFT) results demonstrate that the Co NP -N 1 -C 2 active sites on Co-N-C/CNF make the core contribution to the improvement of ORR properties. Moreover, the zinc-air battery (ZAB) based on the Co-N-C/CNF catalyst also shows outstanding discharge performance. This study provides a new strategy for the preparation and structural design for ZIFs-derived M-N-C materials as efficient ORR catalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Metal‐organic Framework‐derived Fe/Cu‐substituted Co Nanoparticles Embedded in CNTs‐grafted Carbon Polyhedron for Zn‐air Batteries

Kexin Zhang,Yelong Zhang,Qinghua Zhang,Zibin Liang,Lin Gu,Wenhan Guo,Bingjun Zhu,Shaojun Guo,Ruqiang Zou

DOI: https://doi.org/10.1002/cey2.35

2020-01-01

Carbon Energy

Abstract:AbstractMetal‐organic frameworks (MOFs) and MOF‐derived materials have attracted great attention as alternatives to noble‐metal based electrocatalysts owing to their intriguing structure properties, especially for high efficiency and stable oxygen reduction reaction (ORR). Herein, we employed a one‐pot reaction to make a multimetal (Fe, Co, Cu, and Zn) mixed zeolitic imidazolate framework (MM‐ZIF) via adopting a simple in situ redox reaction. Further pyrolysis of the target MM‐ZIF, a highly porous carbon polyhedron (FC‐C@NC) grafted with abundant carbon nanotubes was obtained, in which ultrasmall Co nanoparticles with partial lattice sites substituted by Fe and Cu were embedded. The obtained FC‐C@NC possessed large surface area, highly porous structure, widely‐spread metal active sites, and conductive carbon frameworks, contributing to outstanding ORR activity and long‐term stability. It displayed superior tolerance to methanol crossover and exceeded the commercial Pt/C catalyst and most previously reported non‐noble‐metal catalysts. Impressively, the as‐produced FC‐C@NC‐based zinc‐air battery afforded an open‐circuit potential of 1.466 V, a large specific capacity of 659.5 mAh/g, and a high gravimetric energy density of 784.3 Wh/kgZn, significantly outperforming the Pt/C‐based cathode.
Flexible, Porous, and Metal-Heteroatom-Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn-Air Battery

Qijian Niu,Binling Chen,Junxia Guo,Jun Nie,Xindong Guo,Guiping Ma

DOI: https://doi.org/10.1007/s40820-019-0238-4

2019-01-19

Abstract:Developing an efficient and durable oxygen reduction electrocatalyst is critical for clean-energy technology, such as fuel cells and metal-air batteries. In this study, we developed a facile strategy for the preparation of flexible, porous, and well-dispersed metal-heteroatom-doped carbon nanofibers by direct carbonization of electrospun Zn/Co-ZIFs/PAN nanofibers (Zn/Co-ZIFs/PAN). The obtained Zn/Co and N co-doped porous carbon nanofibers carbonized at 800 °C (Zn/Co-N@PCNFs-800) presented a good flexibility, a continuous porous structure, and a superior oxygen reduction reaction (ORR) catalytic activity to that of commercial 20 wt% Pt/C, in terms of its onset potential (0.98 V vs. RHE), half-wave potential (0.89 V vs. RHE), and limiting current density (- 5.26 mA cm-2). In addition, we tested the suitability and durability of Zn/Co-N@PCNFs-800 as the oxygen cathode for a rechargeable Zn-air battery. The prepared Zn-air batteries exhibited a higher power density (83.5 mW cm-2), a higher specific capacity (640.3 mAh g-1), an excellent reversibility, and a better cycling life than the commercial 20 wt% Pt/C + RuO2 catalysts. This design strategy of flexible porous non-precious metal-doped ORR electrocatalysts obtained from electrospun ZIFs/polymer nanofibers could be extended to fabricate other novel, stable, and easy-to-use multi-functional electrocatalysts for clean-energy technology.
Metal-organic framework-derived carbon nanotubes with multi-active Fe-N/Fe sites as a bifunctional electrocatalyst for zinc-air battery

Chao Yang,Shanshan Shang,Qinfen Gu,Jin Shang,Xiao-yan Li

DOI: https://doi.org/10.1016/j.jechem.2021.08.019

IF: 13.1

2022-03-01

Journal of Energy Chemistry

Abstract:Sustainable metal-air batteries demand high-efficiency, environmentally-friendly, and non-precious metal-based electrocatalysts with bifunctionality for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this research, novel functional carbon nanotubes with multi-active sites including well-dispersed single-atom iron throughout the walls and encapsulated ultrafine iron nanoparticles were synthesized as an electrocatalyst (FeNP@Fe-N-C) through one-step pyrolysis of metal-organic frameworks. High-resolution synchrotron powder X-ray diffraction and X-ray absorption spectroscopy were applied to characterize the unique structure of the electrocatalyst. In comparison to the commercial Pt/C and RuO2 electrodes, the newly prepared FeNP@Fe-N-C presented a superb bifunctional performance with its narrow potential difference (Egap) of 0.73 V, which is ascribed to the metallic Fe nanoparticles that boosts the adsorption and activation of oxygen on the active sites with an enhanced O2 adsorption capacity of 7.88 cm3 g−1 and synergistically functionalizes the iron atoms dispersed on the nanotubes. A rechargeable zinc-air battery based on FeNP@Fe-N-C exhibited a superior open-circuit voltage (1.45 V), power density (106.5 mW cm−2), and stable cycling performance. The green technique developed in this work for the fabrication of functional nanotubes raises the prospect of making more efficient electrocatalysts for sustainable energy cells.

chemistry, physical,engineering, chemical, applied,energy & fuels
Toward Highly Efficient Bifunctional Electrocatalysts for Zinc-Air Batteries: from Theoretical Prediction to a Ternary FeCoNi Design

Wenhao Tang,Jialin He,Kewei Teng,Lei Gao,Ruiyu Qi,Yirui Deng,Ruiping Liu,Ang Li,Huadong Fu,Chang-an Wang

DOI: https://doi.org/10.1039/d2nr04741a

IF: 6.7

2022-01-01

Nanoscale

Abstract:3d Transition-metal nitrogen-carbon nanocomposites (T-N-C, T = Fe, Co, Ni, etc.) with highly active M-Nx sites have received much attention in the field of rechargeable zinc-air battery research. However, how to rationally dope metallic elements to decorate T-N-C catalysts and enhance their electrocatalytic performances remains unclear. Herein, we demonstrated that cobalt-doped Fe-rich catalysts are effective in improving ORR performances by density functional theory (DFT) calculations. On this basis, we reported a kind of novel bifunctional electrocatalyst of hollow nitrogen-doped carbon tubes with coexisting M-N-C single atoms and alloy nanoparticles (denoted FexCoyNiz@hNCTs). Benefiting from the synergistic effect between different components, the as-prepared Fe4Co1Ni2@hNCT catalyst exhibited a small overpotential difference of 0.75 V between an OER potential at 10 mA cm-2 and an ORR half-wave potential, as well as an excellent zinc-air battery performance, when serving as the air cathode. This work provided a scalable design concept for multi-metal doping toward high-performance T-N-C electrocatalysts.
g-C3N4 templated synthesis of the tubular CoFe/N doped carbon composite as advanced bifunctional oxygen electrocatalysts for zinc-air batteries

Long Huang,Linzhi Zuo,Zeyang He,Beibei Xiao,Hu Zhou,Shichuan Su,Yang Li,Ting Bian,Aihua Yuan

DOI: https://doi.org/10.1016/j.jallcom.2021.161011

IF: 6.2

2021-12-01

Journal of Alloys and Compounds

Abstract:Rational incorporating transition metal into porous heteroatom-doped carbon is intensively investigated as an effective strategy to achieve high-performance and bifunctional requirements. Herein, we fabricated the hollow composite that CoFe alloy nanoparticles decorated on the tubular N-doped carbon (denoted as T-CoFe/NC) by soft-templating strategy. In order to effectively incorporate the CoFe alloy into nitrogen doped hollow carbon matrix, g-C3N4 nanotubes were selected as the template to attain high contents of nitrogen doping for tubular carbon matrix. Meanwhile, the coordination effect between tannic acid and metal ions is utilized to limit the metal agglomeration in the process of pyrolysis. Consequently, the resultant catalyst shows an outstanding ORR activity with the half-wave potential of 0.86 V and outstanding stability with only a 2 mV decay after 10,000 cycles. T-CoFe/NC also displays comparable overpotential to the RuO2 at 10 mA cm−2. The high bifunctional electrocatalytic activity is attributed to the unique tubular structure and the combination of Co with Fe can optimize the interaction between the oxygenic species and metal surfaces, enhancing the catalytic activity. And T-CoFe/NC based zinc-air battery exhibits excellent power density, large capacity and good cycling stability.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Carbon nanotubes cross-linked Fe/Fe 3 C Nanoparticles and Fe Single Atoms as High-efficiency Bifunctional Oxygen Electrocatalyst for Rechargeable Zinc-Air Batteries

Zhiwen Xu,Lanlu Lu,Weiwei Chen,Fei Yang,Guimei Liu,Yan Sun,Xiaoyi Qiu,M. Danny Gu,Ping Gao,Dong Su,Minhua Shao

DOI: https://doi.org/10.1016/j.electacta.2024.145427

IF: 6.6

2024-11-30

Electrochimica Acta

Abstract:Although zinc-air batteries (ZABs) have made great progress in recent years, there still a great challenge to develop low-cost bifunctional electrocatalysts with high catalytic activity and stability. Herein, we report a bifunctional oxygen electrocatalyst consisting of ZIF-derived carbon-anchored Fe/Fe 3 C nanoparticles and Fe single atoms, which are crosslinked by carbon nanotubes (denoted as CNT@Fe/Fe 3 C||FeNC). Benefiting from the synergetic effect of Fe/Fe 3 C nanoparticles, Fe-N 4 active sites, and the 3D interpenetrating network structure, CNT@Fe/Fe 3 C||FeNC shows excellent bifunctional catalytic activities with a low ΔE of 0.671 V. Furthermore, the assembled rechargeable ZAB demonstrates a high peak power density of 187 mW cm –2 and shows excellent cycling stability up to 600 h. This work provides new ideas for constructing non-precious metal bifunctional catalysts for practical applications in ZABs.

electrochemistry
Research progress of carbon nanofiber-based precious-metal-free oxygen reaction catalysts synthesized by electrospinning for Zn-Air batteries

Xu Zhang,Lei Wang

DOI: https://doi.org/10.1016/j.jpowsour.2021.230280

IF: 9.2

2021-09-01

Journal of Power Sources

Abstract:Development and utilization of environmentally friendly and renewable energy devices are forced by the increasingly serious energy and environmental crisis. Zn-air batteries (ZABs) have been regarded as efficient energy devices due to the high energy density and safety, so it is very important to develop bifunctional oxygen reaction catalysts for air-cathodes. Electrospinning has attracted great attention in design and synthesis of 1D carbon nanofiber-based precious-metal-free oxygen catalysts for ZABs. This work aims to systematically summarize the research progress of electrospinning for fabricating carbon nanofiber-based precious-metal-free catalysts as air-cathode for ZABs. Firstly, a brief introduction of oxygen reaction mechanisms for air-cathodes is provided. Then, the structural characteristics and performance of the metal-free nanofiber, transition metal-based nanofiber and other precious-metal-free nanofiber catalysts used in ZAB are reviewed. Finally, the designed principle of carbon nanofiber catalysts prepared by electrospinning are highlighted. The challenges and future prospects on the development of carbon nanofiber-based precious-metal-free catalysts for ZABs are presented. This review can provide a comprehensive understanding the application of electrospinning in ZABs and lay a foundation for the design of high-performance air-cathodes.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Stable confinement of Fe/Fe3C in Fe, N-codoped carbon nanotube towards robust zinc-air batteries

Lingbo Zong,Xin Chen,Shuming Dou,Kaicai Fan,Zumin Wang,Wenjun Zhang,Yunmei Du,Jie Xu,Xiaofei Jia,Qi Zhang,Xia Li,Yida Deng,Yanan Chen,Lei Wang

DOI: https://doi.org/10.1016/j.cclet.2020.08.029

IF: 9.1

2021-03-01

Chinese Chemical Letters

Abstract:Catalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have garnered great attention as the key character in metal-air batteries. Herein, we developed a superior nonprecious bifunctional oxygen electrocatalyst, fabricated through spatial confinement of Fe/Fe3C nanocrystals in pyridinic N and Fe-Nx rich carbon nanotubes (Fe/Fe3C-N-CNTs). During ORR, the resultant electrocatalyst exhibits positive onset potential of 1.0 V (vs. RHE), large half-wave potentials of 0.88 V (vs. RHE), which is more positive than Pt/C (0.98 V and 0.83 V, respectively). Remarkably, Fe/Fe3C-N-CNTs exhibits outstanding durability and great methanol tolerance, exceeding Pt/C and most reported nonprecious metal-based oxygen reduction electrocatalysts. Moreover, Fe/Fe3C-N-CNTs show a markedly low potential at j =10 mA/cm2, small Tafel slopes and extremely high stability for OER. Impressively, the Fe/Fe3C-N-CNTs-based Zn-air batteries demonstrate high power density of 183 mW/cm2 and robust charge/discharge stability. It is revealed that the spatial confinement effect can impede the aggregation and corrosion of Fe/Fe3C nanocrystals. Meanwhile, Fe/Fe3C and Fe-Nx play synergistic effect on boosting the ORR/OER activity, which provides an important guideline for construction of inexpensive nonprecious metal-carbon hybrid nanomaterials.

chemistry, multidisciplinary
In-situ generation of metal nanoparticle decorated N-doped carbon secondary reticular structure on coaxial electrospinning fibers for oxygen electrocatalysis

Yingjie Chen,Xiangyu Meng,Chuanjun Fan,Guoliang Yu,Xinbin Wang,Qian Zhang,Beili Pang,Liyan Yu,Lifeng Dong

DOI: https://doi.org/10.1016/j.diamond.2023.110095

IF: 3.806

2023-06-10

Diamond and Related Materials

Abstract:Combining metal-organic frameworks with electrospinning technology, this work employs coaxial electrospun fibers decorated with ZIF-67 as precursors. The Fe 3+ /Co 2+ /Ni 2+ ions in the electrospun fibers are converted into FeCoNi alloy nanoparticles which catalyze the pyrolysis of ZIF-67 on the fiber surface to generate reticulated carbon microfibers. This produces an efficacious bifunctional oxygen electrocatalyst. This new N-doped carbon hierarchical network (NCHNs) catalyst with a distinct secondary reticulated carbon structure possesses larger surface area and pore volume. Besides, the decoration of FeCoNi nanoparticles on the NCHNs provides effective active sites. With rapid mass and electron transfer between the hollow fibers, the synergistic effect between the FeCoNi nanoparticles and the layered carbon network can contribute to the high activity and kinetics of oxygen electrochemistry. At 10 mA cm −2 , the FeCoNi/NCHNs exhibit an ORR half-wave potential of 0.885 V and an OER potential of 1.610 V, which exceeds that of the existing Pt/C and RuO 2 catalysts. Furthermore, the FeCoNi/NCHNs-based rechargeable Zn-Air battery has an excellent power density (160.5 mV cm −2 ), high open-circuit voltage (1.48 V), large specific capacity (792 mAh g −1 ) and excellent cycling stability (>200 h). This work provides a convenient method for designing high performance and low cost catalysts.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Fabrication of Tin-Carbon Composite Anode Material by Electrospinning and Electrostatic Spray Deposition for Lithium Rechargeable Battery

Abirami Dhanabalan,Yan Yu,Xifei Li,Kevin Bechtold,Joachim Maier,Chunlei Wang

DOI: https://doi.org/10.1117/12.852450

2010-01-01

Abstract:Metallic Sn-C composites were prepared by using electrospinning and electrostatic spray deposition (ESD). Morphology of the material prepared by these methods can be controlled by changing the experimental conditions such as the flow rate, voltage, composition of precursor solutions. Influence of the morphology on the electrochemical performance for the same composite was studied. Composite fibers prepared by electrospinning and porous films by ESD were characterized using X ray Diffraction, Transmission Electron Microscopy and Electrochemical characterization. Both the fibers and the porous composite films showed good performance compared to the tin nanopowder based anodes. Capacities of 760mAh/g and 686 mAh/g were obtained for Sn@C-hollow carbon nanofibers and Sn-C porous films, respectively.
Dispersed iron carbide nanoparticles confined in nitrogen and oxygen co-doped porous carbon framework as efficient electrocatalysts for zinc/air batteries

Jingyuan Lai,Lang Gan,Kai Zhang,Jing Fang,Yanqing Lai,Jie Li

DOI: https://doi.org/10.1016/j.jelechem.2020.114369

IF: 4.598

2020-09-01

Journal of Electroanalytical Chemistry

Abstract:Exploiting highly effective and low-cost non-noble metal catalysts for metal/air batteries are still remain a great challenge. In this work, an "active site-framework" structure, namely iron carbide embedded in nitrogen and oxygen co-doped porous carbon framework (A-Fe3), is successfully synthesized by a polydopamine-protection-assisted pyrolysis strategy. The as-prepared catalyst possesses excellent catalytic activity with a half-wave-potential of 0.85 V (vs. reversible hydrogen electrode) for oxygen reduction reaction. In addition, this A-Fe3 loaded zinc/air battery exhibits a negligible voltage gap increase after 300 continuous cycle tests (52 h) at the current density of 50 mA cm−2. The excellent catalytic performance of the catalyst is contributed to high electronic conductivity of Fe3C, high contents of pyridinic and graphitic-N doped porous carbon framework. The concept and achievement can inspire the development of the surface engineering to design other transition metal species decorated carbon catalysts for metal/air batteries.

chemistry, analytical,electrochemistry
Toward highly efficient bifunctional electrocatalysts for zinc-air battery: From theoretical prediction to ternary FeCoNi design

Wenhao Tang,Jialin He,Kewei Teng,Lei Gao,Ruiyu Qi,Yirui Deng,Ruiping Liu,Ang Li,Huadong Fu,Chang-An Wang

DOI: https://doi.org/10.1039/d2nr04741a

IF: 6.7

2022-10-27

Nanoscale

Abstract:The 3d transition-metal nitrogen-carbon nanocomposites (T-N-C, T=Fe, Co, Ni, etc) with highly active M-Nx sites have received much attention in the field of rechargeable zinc-air battery research. However, how to rationally dope the metallic elements to decorate T-N-C catalysts and enhance their electrocatalytic performances remain unclear. Herein, we demonstrated that cobalt-doped Fe-rich catalysts are effective in improving ORR performance by density functional theory (DFT) calculations. On this basis, we reported a kind of novel bifunctional electrocatalysts of hollow nitrogen-doped carbon tubes with the coexistence of M-N-C single atoms and alloy nanoparticles (denoted FexCoyNiz@hNCTs). Benefiting from the synergistic effect between different components, the as-prepared Fe4Co1Ni2@hNCTs manifested a small overpotential difference of 0.75 V between OER potential at 10 mA cm-2 and ORR half-wave potential, as well as excellent zinc-air battery performance serving as the air cathode. This work provided a scalable design concept for multi-metal doping toward high-performance T-N-C electrocatalysts.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Multimetallic Electrocatalysts of FeCoNi Nanoalloy Embedded in Multilayered Carbon Nanotubes for Oxygen Reduction Reaction and Flexible Zn-air Battery

Hua Fang,Heng Bian,Bin Hu,Jiameng Liu,Sizhuan Li,MingHua Wang,Linghao He,Zhihong Zhang

DOI: https://doi.org/10.1016/j.apsusc.2022.154590

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:A series of multicomponent electrocatalysts comprising trimetallic transitional alloy and nanoparticles embedded within multilayered-carbon nanotubes (FeCoNi-CNTs) have been prepared by pyrolysis of the complexes of melamine and Co2+/Ni2+/Fe3+ salts at different ratios under N-2 atmosphere. Combining diverse characterizations of the series of FeCoNi-CNTs revealed that multiple metal modes such as metallic species (Fe, Co, and Ni), M-N, M-O, and FeCoNi alloy are coexisted and evenly distributed in the carbon matrix. The control experiments and DFT calculations verified integration of superior electrocatalytic abilities of these metal active sites and enhanced conductivity of multilayered CNTs endowed the developed electrocatalysts with outperformed catalytic properties. When used FeCoNi-CNTs-2 catalyst (gained by adding 0.2 g transition metal salts and calcined at 700 degrees C) as electrode, the assembling Zn-air battery (ZAB) delivered a stable open circuit potential of 1.49 V, a high power density of 210.5 mW cm(-2) and specific capacity of 815.5 mA h g(Zn)(-1) at 10 mA cm(-2). The ZAB performances were higher than most reported metal compound-based electrocatalysts. Especially, the constructed solid ZAB exhibited high flexibility and showed a wide application potential as electron devices.
In-site grown carbon nanotubes connecting Fe/Cu-N-C polyhedrons as robust electrocatalysts for Zn-air batteries

Manman Bu,Yang Liu,Shuangxiong Liao,Weijie Liu,Zhihao Yang,Jianbo Jiang,Xiaohui Gao,Yahui Yang,Hongtao Liu

DOI: https://doi.org/10.1016/j.carbon.2023.118365

IF: 10.9

2023-08-16

Carbon

Abstract:Fe-N-C catalysts are considered to be the most promising non-precious metal based catalysts for oxygen reduction reactions (ORRs), but the low active site density and the insufficient electron transport capability have seriously impeded their applications in fuel cells and metal-air batteries. Herein, we demonstrate polyhedral Fe/Cu-N-C particles chained by in-site grown carbon nanotubes (CNTs) serving as robust electrocatalysts for Zn-air battery (ZAB) applications. Benefiting from highly exposed polyhedral active sites and FeCu induced in-site grown CNT channels as well as Fe, Cu bimetallic synergistic optimization of adsorption/desorption energy, the engineered Fe/Cu-N-C electrocatalyst exhibits outstanding oxygen reduction performance. The ultrahigh activity of the Fe/Cu-N x catalytic centers is attributed to not only the high content of pyridinic and graphitic N, but also the enhanced electron density around Fe atom center. Both primary and rechargeable ZABs are assembled and tested. The results show that the Fe/Cu-N-C based ZABs are far superior to the commercial Pt/C based ZABs regarding peak power density, specific capacity, energy density and cycling stability.

materials science, multidisciplinary,chemistry, physical
Anchoring Fe-N-C Sites on Hierarchically Porous Carbon Sphere and CNT Interpenetrated Nanostructures as Efficient Cathodes for Zinc-Air Batteries

Fei Fan,Haoran Zhou,Rui Yan,Chengdong Yang,Huang Zhu,Yun Gao,Lang Ma,Sujiao Cao,Chong Cheng,Yinghan Wang

DOI: https://doi.org/10.1021/acsami.1c10510

2021-09-08

Abstract:Engineering efficient zinc-air batteries have attracted tremendous attention because of their essential role in the field of renewable energy systems. However, the sluggish reaction kinetics of the oxygen reduction reaction (ORR) at the air cathode impair the battery performance significantly. Recently, metal-N-C-based porous carbon nanoarchitectures have emerged as promising ORR electrocatalysts in zinc-air batteries. Herein, taking advantage of metal-organic complexation and mesoporous silica templates, we successfully anchor Fe-N-C sites on hierarchically porous carbon sphere and carbon nanotube interpenetrated nanostructures (Fe-N-C/HPCS@CNT) to serve as efficient cathodes for zinc-air batteries. Benefiting from its synergistic effects between the highly active Fe-N-C sites, ultrahigh surface areas, and unique hierarchically porous nanostructures, Fe-N-C/HPCS@CNT exhibits preferable ORR performance (E1/2 = 0.873 V) compared to commercial Pt/C (E1/2 = 0.841 V). Most importantly, when used as a cathode catalyst for homemade zinc-air batteries, Fe-N-C/HPCS@CNT exhibits gratifying peak power density (164.0 mW cm-2), large specific capacity (762.0 mAh g-1), superior long-term stability, extraordinary rate capability, and excellent charge/discharge performance. We believe that this report will not only offer new insights into the design of Fe-N-C-based catalysts but also promote the practical utilization of Fe-N-C-based cathodes for a wide range of energy applications.

Electrospinning-derived transition metal/carbon nanofiber composites as electrocatalysts for Zn-air batteries

Electrospun carbon nanofiber decorated with Co-Ni alloy nanoparticles as a bifunctional electrocatalyst for Zn-ir battery

Electrospun nanofibers and their applications in rechargeable zinc–air batteries

Janus Hollow Nanofiber with Bifunctional Oxygen Electrocatalyst for Rechargeable Zn-Air Battery.

Confinement synthesis of bimetallic MOF-derived defect-rich nanofiber electrocatalysts for rechargeable Zn-air battery

Bead-like cobalt-nitrogen co-doped carbon nanocage/carbon nanofiber composite: a high-performance oxygen reduction electrocatalyst for zinc-air batteries

Metal‐organic Framework‐derived Fe/Cu‐substituted Co Nanoparticles Embedded in CNTs‐grafted Carbon Polyhedron for Zn‐air Batteries

Flexible, Porous, and Metal-Heteroatom-Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn-Air Battery

Metal-organic framework-derived carbon nanotubes with multi-active Fe-N/Fe sites as a bifunctional electrocatalyst for zinc-air battery

Toward Highly Efficient Bifunctional Electrocatalysts for Zinc-Air Batteries: from Theoretical Prediction to a Ternary FeCoNi Design

g-C3N4 templated synthesis of the tubular CoFe/N doped carbon composite as advanced bifunctional oxygen electrocatalysts for zinc-air batteries

Carbon nanotubes cross-linked Fe/Fe 3 C Nanoparticles and Fe Single Atoms as High-efficiency Bifunctional Oxygen Electrocatalyst for Rechargeable Zinc-Air Batteries

Research progress of carbon nanofiber-based precious-metal-free oxygen reaction catalysts synthesized by electrospinning for Zn-Air batteries

Stable confinement of Fe/Fe3C in Fe, N-codoped carbon nanotube towards robust zinc-air batteries

In-situ generation of metal nanoparticle decorated N-doped carbon secondary reticular structure on coaxial electrospinning fibers for oxygen electrocatalysis

Fabrication of Tin-Carbon Composite Anode Material by Electrospinning and Electrostatic Spray Deposition for Lithium Rechargeable Battery

Dispersed iron carbide nanoparticles confined in nitrogen and oxygen co-doped porous carbon framework as efficient electrocatalysts for zinc/air batteries

Toward highly efficient bifunctional electrocatalysts for zinc-air battery: From theoretical prediction to ternary FeCoNi design

Multimetallic Electrocatalysts of FeCoNi Nanoalloy Embedded in Multilayered Carbon Nanotubes for Oxygen Reduction Reaction and Flexible Zn-air Battery

In-site grown carbon nanotubes connecting Fe/Cu-N-C polyhedrons as robust electrocatalysts for Zn-air batteries

Anchoring Fe-N-C Sites on Hierarchically Porous Carbon Sphere and CNT Interpenetrated Nanostructures as Efficient Cathodes for Zinc-Air Batteries