Abstract:The process-structure-property relationship in Large Area Additive Manufacturing (LAAM) technology is an ongoing area of research as the inherent microstructural properties (chiefly fibers and voids) affect the performance of printed parts. Unfortunately, we currently lack adequate understanding of micro void nucleation and evolution during the LAAM and fused deposition modelling (FDM) processes. Modeling of the polymer melt flow during the extrusion process is important in understanding the underlying microstructural formation and associated properties of the print, that determines the part performance in service conditions. In this paper we compute fiber-induced local pressure fluctuations which may promote void formation in the bead's microstructure. On a macro-scale, we determine flow fields of a purely viscous, Newtonian planar polymer deposition flow through a LAAM nozzle which are utilized on a micro-scale model where we simulate the evolution of a single ellipsoidal fiber along streamlines obtained from the macro-model. On the micro-scale, we determine instantaneous values of the translational and rotational velocities of the rigid ellipsoidal fiber that satisfies a balance of hydrodynamic forces and couples on the fiber's surface based on a Newton Raphson algorithm and we track the fiber's motion along the flow path via an explicit numerical iterative algorithm. Model verification is achieved by benchmarking results with solutions from well-known Jeffery's equation of motion of a particle in homogeneous simple shear flow. We account for rotary diffusivity due to short-range fiber-fiber interaction in the FEA simulation by determining an effective fluid domain size representative of the interaction coefficient of the melt flow through a correlation analysis that yields an equivalent steady state orientation based on the Advani-Tucker equation. We also consider different possible motions of the fiber along individual LAAM flow paths from a given set of random initial fiber conditions to determine pressure bounds on the fiber surface along each streamline. For improved computational efficiency, calculations are carried out with respect to the fiber's local coordinate axes to overcome the rigor of adaptive remeshing during the quasi-transient analysis. Results show low pressure extremes near the fiber's surface which varies across the printed bead as well as through its thickness. Discussion is provided to gain insight into the effect of low-pressure extremes on micro void formation, particularly at the nozzle exit and during die swell/expansion.

Bubble Shape and Transport During LCM Processes: Experimental Modeling in a T-Junction Tube

Theoretical and Experimental Modelling of Bubble Formation with Connected Capillaries in Liquid Composite Moulding Processes

Void Prediction During Liquid Composite Molding Processes: Wetting and Capillary Phenomena

Study on Void Formation in Multi-Layer Woven Fabrics

Effect of wettability on the void formation during liquid infusion into fibers

A Review of Non-saturated Resin Flow in Liquid Composite Moulding processes

Optical measurement of voids in situ during infusion of carbon reinforcements

Simulation method for filling stage in liquid composite molding based on a two-phase flow volume of fluid model

Modeling of Void Formation Based on Non-isothermal Conditions in Liquid Composite Molding for Plain-weave Fabric

Experimental And Numerical Analyses On The Poly(Lactide-Co-Glycolide) Hollow Fiber Membranes

Resin percolation and intimate contact in fast processing of thermoplastic composites

3D actual microstructure-based modeling of non-isothermal infiltration behavior and void formation in liquid composite molding

Numerical and experimental analyses of resin infusion manufacturing processes of composite materials

Bubbling Behaviors Induced by Gas-Liquid Mixture Permeating Through A Porous Medium

Behaviour of Rectangular Hollow Thin Ply Carbon Thermoset and Thermoplastic Composite Tubes Subjected to Bending

Experimental Characterization Methods and Numerical Models of Woven Composite Preforms: A Review

Controlling transport dynamics of confined asymmetric fibers

Simulation of Fiber-Induced Melt Pressure Fluctuations within Large Scale Polymer Composite Deposition Beads

Manufacture of thin composite structures by the RTM process: Numerical simulation of the shaping operation

Three-dimensional water diffusion and modelling of flax/shape memory epoxy composites

Resin Film Infusion Process: Numerical Algorithm