Abstract:Background There is a quest of novel functional and reliable platforms for enhancing the efficiency of microextraction approaches in troublesome matrices, such as industrial wastewaters. 3D printing has been proven superb in the analytical field to act as the springboard of microscale extraction approaches. Results In this work, low-force stereolithography (SL) was exploited for 3D printing and prototyping bespoke fluidic devices for accommodating nonsupported microelectromembrane extraction (μEME). The analytical performance of 3D-printed μEME devices with distinct cross-sections, including square, circle, and obround, and various channel dimensions was explored against that of commonly used circular polytetrafluoroethylene (PTFE) tubing in flow injection systems. A computer-controlled millifluidic system was harnessed for the (i) automatic liquid-handling of minute volumes of donor, acceptor, and organic phases at the low μL level that spanned from 3 to 44 μL in this work, (ii) formation of three-phase μEME, (iii) in-line extraction, (iv) flow-through optical detection of the acceptor phase, and (v) solvent removal and regeneration of the μEME device and fluidic lines. Using methylene blue (MB) as a model analyte, experimental results evinced that the 3D-printed channels with an obround cross-section (2.5 mm × 2.5 mm) were the most efficient in terms of absolute extraction recovery (59%), as compared to PTFE tubing of 2.5 mm inner diameter (27%). This is attributed to the distinctive convex interface of the organic phase (1-octanol), with a more pronounced laminar pattern, in 3D-printed SL methacrylate-based fluidic channels against that of PTFE tubing on account of the enhanced octanol wettability and lower contact angles for the 3D-printed devices. The devices with obround channels were leveraged for the automatic μEME and in-line clean-up of MB in high matrix textile dyeing wastewater samples with relative recoveries ≥81%, RSD% ≤ 17.1% and LOD of 1.3 μg/mL. The 3D-printed nonsupported μEME device was proven superb for the analyses of wastewater samples with an elevated ionic strength (0.7 mol L −1 NaCl, 5000 mg L −1 Na 2 CO 3 , and 0.013 mol L −1 NaOH) with recorded electric currents below 12 μA. Novelty The coupling of 3D printing with nonsupported μEME in automatic flow-based systems is herein proposed for the first time and demonstrated for the clean-up of troublesome samples, such as wastewaters.

3D Bioprinting of Engineered Living Materials with Extracellular Electron Transfer Capability for Water Purification

Fabrication and Evaluation of Electrohydrodynamic Jet 3d Printed Polycaprolactone/Chitosan Cell Carriers Using Human Embryonic Stem Cell-Derived Fibroblasts

3D printing for constructing biocarriers using sodium alginate/ε-poly-l-lysine ink: Enhancing microbial enrichment for efficient nitrogen removal in wastewater

Material extrusion-based 3D printing for the fabrication of bacteria into functional biomaterials: the case study of ammonia removal application

Enhanced Nitrogen and Phosphorus Removal by a Novel Ecological Floating Bed Integrated with Three-Dimensional Biofilm Electrode System.

Development Progress of Electroactive Materials for Potential 2D and 3D Bio-printing

3D Printed Biocatalytic Living Materials with Dual‐Network Reinforced Bioinks

Three-Dimensional Bioprinting of Decellularized Extracellular Matrix-Based Bioinks for Tissue Engineering

Development of Electro‐Conductive Composite Bioinks for Electrohydrodynamic Bioprinting with Microscale Resolution

3D-printed stereolithographic fluidic devices for automatic nonsupported microelectromembrane extraction and clean-up of wastewater samples

Additive Manufacturing of Engineered Living Materials with Bio‐Augmented Mechanical Properties and Resistance to Degradation

Controllable and biocompatible 3D bioprinting technology for microorganisms: Fundamental, environmental applications and challenges

Waterborne Polyurethane Acrylates Preparation towards 3D Printing for Sewage Treatment

Water-Responsive 3D Electronics for Smart Biological Interfaces.

A 3D bioprinted decellularized extracellular matrix/gelatin/quaternized chitosan scaffold assembling with poly(ionic liquid)s for skin tissue engineering

Electrohydrodynamic Direct‐Writing Micro/Nanofibrous Architectures: Principle, Materials, and Biomedical Applications

Effective Constructions of Electro-Active Bacteria-Derived Bioelectrocatalysis Systems and Their Applications in Promoting Extracellular Electron Transfer Process

3D bioprinting using hollow multifunctional fiber impedimetric sensors.

An Overview of Extracellular Matrix-Based Bioinks for 3D Bioprinting

Fabrication of stacked-ring netted tubular constructs via 3D template electrohydrodynamic printing

3D Printing of Cell‐Laden Microgel‐Based Biphasic Bioink with Heterogeneous Microenvironment for Biomedical Applications