Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Flexible NiO-Graphene-Carbon Fiber Mats Containing Multifunctional Graphene for High Stability and High Specific Capacity Lithium-Ion Storage.

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Flexible Graphene-Wrapped Carbon Nanotube/Graphene@MnO 2 3D Multilevel Porous Film for High-Performance Lithium-Ion Batteries.

Hierarchical and Heterogeneous Porosity Construction and Nitrogen Doping Enabling Flexible Carbon Nanofiber Anodes with High Performance for Lithium-Ion Batteries

Highly Flexible Graphene/Mn3O4 Nanocomposite Membrane As Advanced Anodes for Li-Ion Batteries

Superior Li-ion Storage Performance of Graphene Decorated NiO Nanowalls on Ni As Anode for Lithium Ion Batteries

High Performance Flexible Lithium‐Ion Battery Electrodes: Ion Exchange Assisted Fabrication of Carbon Coated Nickel Oxide Nanosheet Arrays on Carbon Cloth

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries

Flexible Carbon Fiber/SnO2@rGO Electrode with Long Cyclability for Lithium-Ion Batteries

Integrated 3d Porous C-Mos2/Nitrogen-Doped Graphene Electrode for High Capacity and Prolonged Stability Lithium Storage

Graphene-Based Integrated Electrodes For Flexible Lithium Ion Batteries

Nanotube network arrays with nickel oxide canopies as flexible high-energy anodes for lithium storage

Flexible nitrogen-doped graphene/SnO 2 foams promise kinetically stable lithium storage

Boosting the lithium and sodium storage performance of graphene-based composite via pore engineering and surface protection

Titanium niobate (Ti2Nb10O29) anchored on nitrogen-doped carbon foams as flexible and self-supported anode for high-performance lithium ion batteries

NiO–graphene Hybrid As an Anode Material for Lithium Ion Batteries

High‐Performance Li–O2 Batteries Based on All‐Graphene Backbone

Membranes of MnO Beading in Carbon Nanofibers as Flexible Anodes for High-Performance Lithium-Ion Batteries

Ultralong MnO@C nanowires with internal voids anchored between graphene as a robust high performance anode for flexible Li-Ion battery

Porous Multishelled Nio Hollow Microspheres Encapsulated Within Three-Dimensional Graphene As Flexible Free-Standing Electrodes For High-Performance Supercapacitors