Abstract:The overall performance of carbon-based materials for sodium-ion batteries (SIBs) is still restricted by the sluggish transfer kinetics of Na+ and limited rate capability. Specifically, introducing ultramicropores (pores width <0.7 nm) into carbon materials may be effective in improving the anode performance of SIBs. However, due to the difficulty of their synthesis and homogeneity regulation, ultramicroporous carbon as advanced SIB anodes as well as their sodium storage mechanisms have seldom been investigated. Herein, carbon spheres with centralized ultramicropores and abundant C═O is facilely obtained by combining the in situ ion activation and the novel quantitative air-assisted carbonization process for the first time. The quantitative air acts not only as a mild agent to activate the materials, but also as an oxygen dopant for forming oxygen-containing functional groups. As the optimized anode, quantitative air-assisted carbonized spheres with a precursor weight of 0.3 g (QACS-0.3) delivers a high rate capability (265 and 121 mAh g–1 at 0.05 and 5.0 A g–1, respectively) and good cycling stability (126 mAh g–1 after 5000 cycles at 5.0 A g–1). Kinetic analysis, theoretical calculation, and ex situ testing technologies reveal that the ultramicropores can facilitate the diffusion of Na+ below 0.2 V; the synergistic effect of defects, C═O, and ultramicropores can extend the discharge curves and effectively improve the adsorption capacity of carbon materials. Additionally, a new discharge model is proposed to explain the sodium storage behaviors in these electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01885?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01885</a>.XRD patterns, CV curves, and cycling performance of DCS and QACS-0.3; calculation method for GITT; ex XPS curves of the charging process; SEM and TEM images, XRD, Raman, XPS, and nitrogen adsorption–desorption curves of QACSs; CV, GC, cycling performance, electrical resistivity, and EIS plots of QACSs; SEM images, pore size distribution, and XPS spectra of DPCS and QPCS; and comparison of cycling and rate performance of QACS-0.3 with other glucose-derived materials for sodium-ion batteries (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01885/suppl_file/sc1c01885_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile construction of uniform ultramicropores in porous carbon for advanced sodium-ion battery

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Enhancing capacitive storage of carbonaceous anode by surface doping and structural modulation for high-performance sodium-ion battery

High-rate sodium storage performance enabled using hollow Co3O4 nanoparticles anchored in porous carbon nanofibers anode

Fabricating multi-porous carbon anode with remarkable initial coulombic efficiency and enhanced rate capability for sodium-ion batteries

N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Metal–Organic Frameworks‐Derived Porous Yolk–Shell MoP/Cu 3 P@carbon Microcages as High‐Performance Anodes for Sodium‐Ion Batteries

Boosting the ultrahigh initial coulombic efficiency of porous carbon anodes for sodium-ion batteries via in situ fabrication of a passivation interface

Nitrogen‐Doped Porous Carbon Nanosheets with Ultrahigh Capacity and Quasicapacitive Energy Storage Performance for Lithium and Sodium Storage Applications

Engineering Ultramicroporous Carbon with Abundant C═O as Extended “Slope-Dominated” Sodium Ion Battery Anodes

Spongy-like N, S-codoped ultrathin layered carbon assembly for realizing high performance sodium-ion batteries

Metal–Organic Frameworks‐Derived Porous Yolk–Shell MoP/Cu3P@carbon Microcages As High‐Performance Anodes for Sodium‐Ion Batteries

Nanoconfined Strategy Optimizing Hard Carbon for Robust Sodium Storage

Controlled synthesis of multi-doped highly-disordered porous biomass carbon microsphere for ultra-stable and fast sodium storage

Nitrogen-doped 3D nanocarbon with nanopore defects as high-capacity and stable anode materials for sodium/lithium-ion batteries

Flexible Membrane Consisting of MoP Ultrafine Nanoparticles Highly Distributed Inside N and P Codoped Carbon Nanofibers As High-Performance Anode for Potassium-Ion Batteries.

N, S Co-Doped Porous Carbon Nanospheres with a High Cycling Stability for Sodium Ion Batteries

A synthesis strategy of 3D carbon nanosheet anode with adsorption/intercalation-filling hybrid mechanism for high-performance sodium/potassium-ion batteries