Abstract:Li-ion batteries are the dominant solution for many applications, from small electronic devices up to hybrid and fully electric vehicles.[1] However, this technology is now mature and new chemistries are needed to reach high specific energy while ensuring safety. Despite a relatively low operating voltage, sulfur (S 8 ) is an attractive cathode active material due to its high theoretical specific capacity; a factor of six higher than traditional LiCoO 2 cathodes.[2] To realize high energy density systems, the S 8 cathode must be paired with a Li metal anode. Many challenges remain to be addressed to effectively couple a Li metal with a S 8 cathode such as the low S 8 utilization, the strong volume change of active material upon cycling, the insulating nature of S 8 and of the final product Li 2 S, the solubility of polysulfides in the electrolyte.[3] This issues lead to poor capacity retention, limited cycle life, and low Coulombic efficiency. To address the polysulfide dissolution problem one approach consists in confining S 8 within mesoporous and nanoporous carbon.[4] However, conventional liquid electrolytes are not stable against Li metal. A solution is then to use a solid polymer electrolytes, such as polystyrene- b -poly(ethylene oxide) (SEO) block copolymer doped with LiTFSI salt, known to stabilize Li metal.[5] The goal of this study is to understand the behavior of Li-S 8 batteries comprising a SEO electrolyte. The cathode is a composite made of carbon, SEO electrolyte and sulfur-impregnated carbon nanospheres.[6] The cells were cycled and exhibited significant capacity fade. We thus used hard X-ray microtomography to determine the reason for this capacity fade. Figure 1 represents tomography images prior and after cycling. In addition to polysulfide dissolution, our observations indicate that the battery failure in our system is also due to strong changes at the Li/SEO interface. References [1] J. B. Goodenough, K.-S. Park, J. Am. Chem. Soc. , 135 (2013) 1167 (2013). [2] P. G. Bruce, S. A. Freunberger, L. J. Hardwick, J.-M. Tarascon, Nat. Mater. , 11 (2012) 19. [3] S. S. Zhang, J. Power Sources , 231, 153 (2013). [4] X. Fan, W. Sun, F. Meng, A. Xing, J. Liu, Green Energy Environ. , 3 (2018) 2. [5] D. T. Hallinan, S. A. Mullin, G. M. Stone, and N. P. Balsara, J. Electrochem. Soc. , 160, (2013) A464. [6] D. Devaux, I. Villaluenga, X. Jiang, Y. H. Chang, D. Y. Parkinson, N. P. Balsara, J. Electrochem. Soc. , 167 (2020) 060506 Figure 1

Insight into the Capacity Fading Mechanism of Amorphous Se2S5 Confined in Micro/Mesoporous Carbon Matrix in Ether-Based Electrolytes.

Interfacial Lithiation Induced Leapfrog Phase Transformation in Carbon Coated Se Cathode Observed by In-Situ TEM

Progressive growth of the solid–electrolyte interphase towards the Si anode interior causes capacity fading

(De)lithiation Mechanism of Li/SeS(x) (x = 0-7) Batteries Determined by in Situ Synchrotron X-ray Diffraction and X-ray Absorption Spectroscopy.

In Situ TEM Investigation of Congruent Phase Transition and Structural Evolution of Nanostructured Silicon/Carbon Anode for Lithium Ion Batteries

Enabling Selenium‐Rich Se x S y Cathodes to Work in Carbonate‐Based Electrolytes

X-Ray Microtomography Analysis of Li-Sulfur Batteries with a Block Copolymer Electrolyte

A novel insight into deterioration of heavily sulfur-loaded cathode in Li-S battery

Capacity Fade Analysis of Sulfur Cathodes in Lithium-Sulfur Batteries

Design strategies of performance-enhanced Se cathodes for Li-Se batteries and beyond

π-type orbital hybridization and reactive oxygen quenching induced by Se-doping for Li-rich Mn-based oxide cathode

High Selenium Loading in Vertically Aligned Porous Carbon Framework with Visualized Fast Kinetics for Enhanced Lithium/Sodium Storage

(Invited) Advanced Photoelectron Spectroscopy on Battery Materials: Lessons Learnt on Silicon- Containing Electrodes

A Comprehensive Cognition for the Capacity Fading Mechanism of FeS2 in Argyrodite‐based All‐solid‐state Lithium Battery

Insight on lithium metal anode interphasial chemistry: Reduction mechanism of cyclic ether solvent and SEI film formation

Fundamental Understanding and Quantification of Capacity Losses Involving the Negative Electrode in Sodium-Ion Batteries

Modelling the Morphological Background to Capacity Fade in Si-based Lithium-Ion Batteries

Insight into the Fading Mechanism of the Solid‐Conversion Sulfur Cathodes and Designing Long Cycle Lithium–Sulfur Batteries

An Integrated Hybrid Interlayer for Polysulfides/selenides Regulation Toward Advanced Li–SeS2 Batteries

Degradation mechanisms of lithium sulfide (Li2S) composite cathode in carbonate electrolyte and improvement by increasing electrolyte concentration

Solid‐State Lithium/Selenium–Sulfur Chemistry Enabled Via a Robust Solid‐Electrolyte Interphase