Abstract:Superhydrophobic surfaces combining hierarchical micro/nanostructures were fabricated on zinc substrates by etching in hydrochloric acid solution, electrodeposition of ZnO coatings and subsequent thermal annealing. The optimal coatings were electrodeposited at -1.25 V for 900 s on the etched zinc substrates and then annealed at 200 degrees C for 60 min, which could achieve a maximum water contact angle of 170 +/- 2 degrees and an ultra-low sliding angle of approximately 0 degrees. By conducting SEM and water CA analysis, we found that the morphology and wettability of prepared samples were controllable by the fabrication process. Interestingly, even without any additional modification, the samples prepared under different electrodeposition conditions (including Zn(CH3COO)(2) concentration from 5 mM to 40 mM and deposition time from 300 s to 1500 s) exhibited superhydrophobic character. The influences of the Zn(CH3COO)(2) concentration, deposition time, annealing temperature and annealing time on the wetting behaviors were also discussed in detail. Such superhydrophobic surfaces possess long-term stability, and good corrosion resistance as well as self-cleaning ability. In addition, the anti-icing properties of the ZnO films were investigated. These surfaces could be rapidly and reversibly switched between superhydrophobicity and superhydrophilicity by alternating UV illumination and dark storage or thermal annealing. The intelligent switchable surfaces with controllable wettability and morphology offer possibilities for chemical, biological, electronic and microfluidic applications. (C) 2015 Elsevier B.V. All rights reserved.

Preparation of Superhydrophobic Zno Films on Zinc Substrate by Chemical Solution Method

A Facile Method to Fabricate Superhydrophobic ZnO Nanostructure with Petal Effect

Fabrication of superhydrophobic surfaces on zinc substrates

Controlled Growth of Superhydrophobic Films Without Any Low-Surface-energy Modification by Chemical Displacement on Zinc Substrates

Controlled Fabrication of NiO/ZnO Superhydrophobic Surface on Zinc Substrate with Corrosion and Abrasion Resistance

Controllable Wettability and Morphology of Electrodeposited Surfaces on Zinc Substrates

Synthesis of tin superhydrophobic surfaces on zinc substrates

Controlled Growth of Superhydrophobic Films by Sol–gel Method on Aluminum Substrate

Preparation of Superhydrophobic Zno Surface Derived from Wood Template

Superhydrophobic Surfaces Via Controlling the Morphology of ZnO Micro/nano Complex Structure

Hydrogen bubble-templated electrodeposition of modifier-free superhydrophobic Zn-Ni films

Reversible Wettability of a Chemical Vapor Deposition Prepared ZnO Film Between Superhydrophobicity and Superhydrophilicity

Electrochemical Deposition of Conductive Superhydrophobic Zinc Oxide Thin Films

Superhydrophobic Surfaces Based on Dandelion-Like ZnO Microspheres

Fabrication of Bismuth Superhydrophobic Surface on Zinc Substrate

A One-Step Method to Fabricate Lotus Leaves-Like Zno Film

Fabrication of superhydrophobic surfaces on zinc substrates and their application as effective corrosion barriers

One-step Controllable Fabrication of Superhydrophobic Surfaces with Special Composite Structure on Zinc Substrates.

Preparation and Properties of ZnS Superhydrophobic Surface with Hierarchical Structure

Preparation of superhydrophobic coatings on zinc as effective corrosion barriers.

A simple method to fabricate the different extents of superhydrophobic surfaces