Abstract:Alloy solidification is an important process to control the mechanical properties of engineering products. During solidification, dendrite fragmentation occurs commonly as a key phenomenon to determine the microstructure and to obtain fine grain size. Recently, in situ synchrotron X-radiography technique was developed and applied to observe thermodynamic behaviors such as dendrite growth and fragmentation during solidification. External forces such as mechanical and electromagnetic stirring, and thermal shock were added into the solidification process to investigate their effects on the fragmentation behavior. However, most work conducted in literature focused on qualitative aspects e.g. morphology transition or solute distribution and quantitative investigation such as determining the specific relationship between fragmentation and solidification conditions was rather limited. In this work, the third generation synchrotron X-radiography technique was used to observe the solidification process of an Al-15%Cu (mass fraction) alloy. Experimental conditions including the strength of the pulsed electromagnetic fields, dendrite growth direction and the temperature gradients were varied and the subsequent effect on fragmentation was studied and quantified. A computer program was developed based on Matlab to perform the image processing and measurement. The fragmentation number according to experiments was counted and correlated to the mushy zone depth and local solid fraction. Results showed that a stronger electromagnetic field, growing against gravity and growing at higher velocity would significantly increase the fragmentation number. Furthermore, the fragmentation number followed a Gauss distribution as a function of either mushy zone depth or local solid fraction, and the maximum fragmentation occurred when the-solid fraction was about 0.45. In the end the extent to which caused those statistic results above were analyzed as the necking process due to the velocity field, the cumulative solid due to the gravity field and the liquid flow due to the electromagnetic field.

Onset of the initial instability during the solidification of welding pool of aluminum alloy under transient conditions

Dynamic evolution of initial instability during non-steady-state growth.

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Simulation for microstructure evolution of Al-Si alloys in solidification process

Impact on Solidification Dendrite Growth by Interfacial Atomic Motion Time with Phase-Field Method

Phase Field Investigation of Dendrite Growth in the Welding Pool of Aluminum Alloy 2A14 under Transient Conditions

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Multi-physics multi-scale simulation of microstructure evolution in entire welds of 2219-T6 aluminum alloy: An MPF-LBM study

Simulation of Isothermal Solidification of Multi-Component Alloys with Phase-Field Method

Simulation of Equiaxed Dendritic Growth in Molten Pool of Pure Metal with Phase-Field Method

Phase-field simulation of evolution of interfacial morphology and microstructure for Ti-45%Al alloy

Systematical factor analysis of dendrite morphology and solute distribution in entire welding molten pool of Al Cu alloy: An MPF-LBM study

Microstructural Pattern Formation during Far-from-Equilibrium Alloy Solidification

Phase-Field Simulation for Non-isothermal Solidification of Al-Cu Binary Alloy

Simulation of Solidification Microstructure Evolution in Molten Pool of Nickel Base Alloy

QUANTIFICATION STUDY ON DENDRITE FRAGMENTATION IN SOLIDIFICATION PROCESS OF ALLUMINUM ALLOYS

Cellular Automaton Modeling for Dendritic Growth During Laser Beam Welding Solidification Process

An Integrated Model for Dendritic and Planar Interface Growth and Morphological Transition in Rapid Solidification

Investigation of microstructure evolution on different planes in laser welding of aluminum alloy

A Two-Dimensional Phase-Field Investigation on Unidirectionally Solidified Tip-Splitting Microstructures